派生自 ~xm/HomeApp
ZigbeeApp/Shared/Phone/ZigBee/Device/DeviceType.csold mode 100755 new mode 100644
@@ -1,160 +1,179 @@ using System; namespace ZigBee.Device { public enum DeviceType { UnKown = 0x9999, ZbGateway = 0x9998, /// <summary> /// 干结点 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OnOffSwitch = 0, /// <summary> /// 亮度控制开关 /// <para>设备ID为2</para> /// <para>定义对象 LevelControlSwitch</para> /// </summary> LevelControlSwitch = 1, /// <summary> /// 继电器 /// <para>设备ID为2</para> /// <para>定义对象：ToggleLight</para> /// </summary> OnOffOutput = 2, /// <summary> /// 门锁 /// <para>设备ID为10</para> /// <para>定义对象：DoorLock</para> /// </summary> DoorLock = 10, /// <summary> /// 设备ID为257的设备 /// <para>调光灯：支持亮度</para> /// <para>调光设备</para> /// </summary> DimmableLight = 257, /// <summary> /// 设备ID为258的设备 /// <para>色温灯</para> /// <para>定义对象：ColorTemperatureLight</para> /// </summary> ColorTemperatureLight = 258, /// <summary> /// 颜色调光灯开关 /// <para>设备ID为2</para> /// <para>定义对象 LevelControlSwitch</para> /// </summary> ColorDimmerSwitch = 261, /// <summary> /// 窗帘设备ID /// <para>Rollershade:卷帘</para> /// </summary> WindowCoveringDevice = 514, /// <summary> /// 窗帘控制器设备ID /// <para>CurtainController:窗帘控制器</para> /// </summary> WindowCoveringController = 515, /// <summary> /// 设备ID为528的设备 /// <para>颜色调光灯：支持亮度/色度/饱和度</para> /// <para>调光设备</para> /// </summary> ColorDimmableLight = 528, /// <summary> /// 恒温器 /// <para>设备ID为769</para> /// <para>定义对象：AC</para> /// </summary> Thermostat = 769, /// <summary> /// 安防设备 /// <para>设备ID为1026的设备</para> /// <para>定义对象：IASZone</para> /// </summary> IASZone = 1026, /// <summary> /// 蜂鸣器 /// <para>设备ID为1027的设备</para> /// <para>定义对象：Buzzer</para> /// </summary> Buzzer = 1027, /// <summary> /// 空气开关 /// </summary> AirSwitch = 53249, /// <summary> /// 中继器 /// </summary> Repeater = 53250, /// <summary> /// 控制源设备 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OtaPanelDevice = 49152, /// <summary> /// 控制源设备 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OtaDevice = 49153, /// 新风 /// <para>设备ID为53504</para> /// <para>定义对象：FreshAirAC</para> /// </summary> FreshAir = 0xD100, /// <summary> /// <para>新风湿度传感器</para> /// <para>设备ID为53760</para> /// <para>定义对象：HumiditySensor</para> /// </summary> FreshAirHumiditySensor = 0xD200, /// 转换器 /// <para>设备ID为53251</para> /// <para>定义对象：Transverter</para> /// </summary> Transverter = 0xD003, /// <summary> /// <para>温湿度传感器</para> /// <para>设备ID为770</para> /// <para>定义对象：TemperatureSensor</para> /// </summary> TemperatureSensor = 770, /// <summary> /// <para>PM2.5传感器</para> /// <para>设备ID为777</para> /// <para>定义对象：PMSensor</para> /// </summary> PMSensor = 777, } public enum DeviceType { UnKown = 0x9999, ZbGateway = 0x9998, /// <summary> /// 干结点 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OnOffSwitch = 0, /// <summary> /// 亮度控制开关 /// <para>设备ID为2</para> /// <para>定义对象 LevelControlSwitch</para> /// </summary> LevelControlSwitch = 1, /// <summary> /// 继电器 /// <para>设备ID为2</para> /// <para>定义对象：ToggleLight</para> /// </summary> OnOffOutput = 2, /// <summary> /// 门锁 /// <para>设备ID为10</para> /// <para>定义对象：DoorLock</para> /// </summary> DoorLock = 10, /// <summary> /// 设备ID为257的设备 /// <para>调光灯：支持亮度</para> /// <para>调光设备</para> /// </summary> DimmableLight = 257, /// <summary> /// 设备ID为258的设备 /// <para>色温灯</para> /// <para>定义对象：ColorTemperatureLight</para> /// </summary> ColorTemperatureLight = 258, /// <summary> /// 颜色调光灯开关 /// <para>设备ID为261</para> /// <para>定义对象 LevelControlSwitch</para> /// </summary> ColorDimmerSwitch = 261, /// <summary> /// 调光器控制器 /// <para>设备ID为260</para> /// <para>定义对象 DimmerSwitch</para> /// </summary> DimmerSwitch = 260, /// <summary> /// 窗帘设备ID /// <para>Rollershade:卷帘</para> /// </summary> WindowCoveringDevice = 514, /// <summary> /// 窗帘控制器设备ID /// <para>CurtainController:窗帘控制器</para> /// </summary> WindowCoveringController = 515, /// <summary> /// 设备ID为528的设备 /// <para>颜色调光灯：支持亮度/色度/饱和度</para> /// <para>调光设备</para> /// <para>定义对象：ColorDimmableLight</para> /// </summary> ColorDimmableLight = 528, /// <summary> /// 恒温器 /// <para>设备ID为769</para> /// <para>定义对象：AC</para> /// </summary> Thermostat = 769, /// <summary> /// 安防设备 /// <para>设备ID为1026的设备</para> /// <para>定义对象：IASZone</para> /// </summary> IASZone = 1026, /// <summary> /// 设备的功能类型(此类型目前只针对继电器回路有效) /// 蜂鸣器 /// <para>设备ID为1027的设备</para> /// <para>定义对象：Buzzer</para> /// </summary> Buzzer = 1027, /// <summary> /// 空气开关 /// </summary> AirSwitch = 53249, /// <summary> /// 中继器 /// </summary> Repeater = 53250, /// <summary> /// 控制源设备 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OtaPanelDevice = 49152, /// <summary> /// 控制源设备 /// <para>设备ID为0</para> /// <para>定义对象：Panel</para> /// </summary> OtaDevice = 49153, /// 新风 /// <para>设备ID为53504</para> /// <para>定义对象：FreshAirAC</para> /// </summary> FreshAir = 0xD100, /// <summary> /// <para>新风湿度传感器</para> /// <para>设备ID为53760</para> /// <para>定义对象：HumiditySensor</para> /// </summary> FreshAirHumiditySensor = 0xD200, /// 转换器 /// <para>设备ID为53251</para> /// <para>定义对象：Transverter</para> /// </summary> Transverter = 0xD003, /// <summary> /// <para>温湿度传感器</para> /// <para>设备ID为770</para> /// <para>定义对象：TemperatureSensor</para> /// </summary> TemperatureSensor = 770, /// <summary> /// <para>PM2.5传感器</para> /// <para>设备ID为777</para> /// <para>定义对象：PMSensor</para> /// </summary> PMSensor = 777, /// <summary> /// <para>晾衣架</para> /// <para>设备ID为0xD004</para> /// <para>定义对象：Airer</para> /// </summary> Airer = 53252, /// <summary> /// <para>空气质量传感器</para> /// <para>设备ID为0x0302</para> /// <para>定义对象：AirQualitySensor</para> /// </summary> AirQualitySensor = 0x0302, } /// <summary> /// 设备的功能类型(此类型目前只针对继电器回路有效) /// </summary> public enum DeviceFunctionType { /// <summary> /// 还没有指定为什么类型 /// </summary> public enum DeviceFunctionType { /// <summary> /// 还没有指定为什么类型 /// </summary> A未定义 = -1, /// <summary> /// 手动指定它为不指向任何类型 /// </summary> A不指定 = 0, /// <summary> /// 开关 /// </summary> A开关 = 1, /// <summary> /// 灯光 /// </summary> A灯光 = 2, /// <summary> /// 插座 /// </summary> A插座 = 3 } A未定义 = -1, /// <summary> /// 手动指定它为不指向任何类型 /// </summary> A不指定 = 0, /// <summary> /// 开关 /// </summary> A开关 = 1, /// <summary> /// 灯光 /// </summary> A灯光 = 2, /// <summary> /// 插座 /// </summary> A插座 = 3 } }
