~wjc/HomeApp.git

old mode 100755 new mode 100644

			@@ -330,11 +330,7 @@
			/// </summary>
			public const int GetPanelProximityFail = 233;
			/// <summary>
			/// 镜像ID为2310的设备的默认名字：方悦新风小模块
			/// </summary>
			public const int DeviceModelId2310 = 234;
			/// <summary>
			/// 镜像ID为2310的设备的默认名字：方悦新风小模块
			/// 按住面板模式
			/// </summary>
			public const int AddFreshAirPanelMsg = 235;
			/// <summary>
			@@ -354,7 +350,7 @@
			/// </summary>
			public const int AddFreshAirModulPanelMsg = 239;
			/// <summary>
			/// 设置常开模式后，您的门锁将始终{0}处于打开状态，确认开启？
			/// 设置常开模式后，您的门锁将始终{0}处于打开状态，确认开启？
			/// </summary>
			public const int SetDoorLockNomallyOpen = 241;
			/// <summary>
			@@ -511,14 +507,65 @@
			/// </summary>
			public const int InvalidTimeIsEmpty = 297;
			/// <summary>
			/// 失效时间不能大于36小时
			/// 失效时间不能大于72小时
			/// </summary>
			public const int InvalidTimeMoreThan36 = 298;
			public const int InvalidTimeMoreThan72 = 298;
			/// <summary>
			/// 失效时间不能小于1小时
			/// </summary>
			public const int InvalidTimeLessThan1 = 299;

			/// <summary>
			/// 新风
			/// </summary>
			public const int FreshAir = 300;
			/// <summary>
			/// 非管理员不能在常开模式下操作
			/// </summary>
			public const int OnlyMasterOperate = 301;
			/// <summary>
			/// 绑定新风
			/// </summary>
			public const int BindFreshAirTarget = 302;
			/// <summary>
			/// 温度来源
			/// </summary>
			public const int TemperatureSource = 303;
			/// <summary>
			/// 湿度来源
			/// </summary>
			public const int HumiditySource = 304;
			/// <summary>
			/// PM2.5来源
			/// </summary>
			public const int PM25Source = 305;
			/// <summary>
			/// 警告！此次常开模式默认门锁一直开着，没有实现自动关闭功能
			/// </summary>
			public const int AddLogicNormallyModeFailed = 307;
			/// <summary>
			/// 警告！时效性常开删除失败。
			/// </summary>
			public const int CancelLogicNormallyModeFailed = 308;
			/// <summary>
			/// 时效性常开删除失败，继续“常开模式”请前往门锁用户界面设置
			/// </summary>
			public const int CancelLogicNormallyModeFailed2 = 309;
			/// <summary>
			/// 请输入合法的数字
			/// </summary>
			public const int IllegalNumber = 310;
			/// <summary>
			/// 手动
			/// </summary>
			public const int Manual = 311;
			/// <summary>
			/// 背光灯颜色
			/// </summary>
			public const int BackgroundLightColor = 312;
			/// <summary>
			/// PM2.5感器 -> 长按图示按键5秒以上，信号图标{0}快闪，进入配网状态。信号图标常亮则配网成功
			/// </summary>
			public const int AddSensorPMMsg = 313;

			public readonly static int cancel = 5097;
			public readonly static int confrim = 5098;
			@@ -560,7 +607,7 @@
			public readonly static int Sunrisesunset = 5134;
			public readonly static int cycle = 5135;
			public readonly static int completeNext = 5136;
			public readonly static int Selectedtimetype= 5137;
			public readonly static int Selectedtimetype = 5137;
			public readonly static int Timecondition = 5138;
			public readonly static int condition = 5139;
			public readonly static int pushset = 5140;
			@@ -618,7 +665,7 @@
			public readonly static int addtime = 5192;
			public readonly static int selectcommontimetype = 5193;
			public readonly static int newautomation = 5194;
			public readonly static int editautomation= 5195;
			public readonly static int editautomation = 5195;
			public readonly static int open1 = 5196;
			public readonly static int disable = 5197;
			public readonly static int selectsavedautomationstate = 5198;
			@@ -754,10 +801,10 @@
			public readonly static int logictemplate = 5358;
			public readonly static int onlight = 5359;
			public readonly static int offlight = 5360;
			public readonly static int OnOffSwitch=5361;
			public readonly static int OnOffSwitch = 5361;
			public readonly static int addlinkageevent = 5362;
			public readonly static int editlinkageevent = 5363;
			public readonly static int selectunlockingmode=5364;
			public readonly static int selectunlockingmode = 5364;
			public readonly static int lockaddaction = 5365;
			public readonly static int linkageevent = 5366;
			public readonly static int current = 5367;
			@@ -776,6 +823,22 @@
			public readonly static int openmode = 5380;
			public readonly static int addnull = 5381;
			public readonly static int look = 5382;
			public readonly static int closeUp = 5383;
			public readonly static int yearSone = 5384;
			public readonly static int monthSone = 5385;
			public readonly static int daySone = 5386;
			public readonly static int numberSone = 5387;
			public readonly static int openAutomationSone = 5388;
			public readonly static int timeSetSone= 5389;
			public readonly static int invalidSetting = 5390;
			public readonly static int hour = 5391;
			public readonly static int lockOpen = 5392;
			public readonly static int setDoorLockOpen = 5393;
			public readonly static int less = 5394;
			public readonly static int more = 5395;
			public readonly static int or = 5396;
			public readonly static int timeNull = 5397;
			public readonly static int numberInput = 5398;

			#region 登录注册
			/// <summary>
			@@ -789,114 +852,114 @@



			/// <summary>
			/// 手机号
			/// </summary>
			public const int PhoneNum = 10100;
			/// <summary>
			/// 邮箱
			/// </summary>
			public const int Email = 10101;
			/// <summary>
			/// 请输入手机号
			/// </summary>
			public const int PleaseInputPhoneNum = 10102;
			/// <summary>
			/// 请输入不少于6位的密码
			/// </summary>
			public const int PleaseInputPWD = 10103;
			/// <summary>
			/// 登录
			/// </summary>
			public const int Login = 10104;
			/// <summary>
			/// 验证码登录
			/// </summary>
			public const int LoginByCode = 10105;
			/// <summary>
			/// 注册用户
			/// </summary>
			public const int Register = 10106;
			/// <summary>
			/// 请输入邮箱
			/// </summary>
			public const int PleaseInputEmail = 10107;
			/// <summary>
			/// 搜索
			/// </summary>
			public const int Search = 10108;
			/// <summary>
			/// 完成
			/// </summary>
			public const int Complete = 10109;
			/// <summary>
			/// 账号登录
			/// </summary>
			public const int LoginByAccountPWD = 10110;
			/// <summary>
			/// 获取验证码
			/// </summary>
			public const int SendVerificationCode = 10111;
			/// <summary>
			/// 后重发
			/// </summary>
			public const int SendVerificationCodeAgain = 10112;
			/// <summary>
			/// 请再次输入密码
			/// </summary>
			public const int PleaseComfirePWD = 10113;
			/// <summary>
			/// 发送验证码成功，请注意查收
			/// </summary>
			public const int SendVerificationCodeSuccess = 10114;
			/// <summary>
			/// 确定
			/// </summary>
			public const int Confrim = 10115;
			/// <summary>
			/// 手机号
			/// </summary>
			public const int PhoneNum = 10100;
			/// <summary>
			/// 邮箱
			/// </summary>
			public const int Email = 10101;
			/// <summary>
			/// 请输入手机号
			/// </summary>
			public const int PleaseInputPhoneNum = 10102;
			/// <summary>
			/// 请输入不少于6位的密码
			/// </summary>
			public const int PleaseInputPWD = 10103;
			/// <summary>
			/// 登录
			/// </summary>
			public const int Login = 10104;
			/// <summary>
			/// 验证码登录
			/// </summary>
			public const int LoginByCode = 10105;
			/// <summary>
			/// 注册用户
			/// </summary>
			public const int Register = 10106;
			/// <summary>
			/// 请输入邮箱
			/// </summary>
			public const int PleaseInputEmail = 10107;
			/// <summary>
			/// 搜索
			/// </summary>
			public const int Search = 10108;
			/// <summary>
			/// 完成
			/// </summary>
			public const int Complete = 10109;
			/// <summary>
			/// 账号登录
			/// </summary>
			public const int LoginByAccountPWD = 10110;
			/// <summary>
			/// 获取验证码
			/// </summary>
			public const int SendVerificationCode = 10111;
			/// <summary>
			/// 后重发
			/// </summary>
			public const int SendVerificationCodeAgain = 10112;
			/// <summary>
			/// 请再次输入密码
			/// </summary>
			public const int PleaseComfirePWD = 10113;
			/// <summary>
			/// 发送验证码成功，请注意查收
			/// </summary>
			public const int SendVerificationCodeSuccess = 10114;
			/// <summary>
			/// 确定
			/// </summary>
			public const int Confrim = 10115;
			/// <summary>
			/// 该用户已存在，可直接登录
			/// </summary>
			public const int AccountHasBeenRegistered = 10116;
			/// <summary>
			/// 提供的参数错误
			/// </summary>
			public const int PARAMETEROREMPTY = 10117;
			/// <summary>
			/// 提供的参数错误
			/// </summary>
			public const int PARAMETEROREMPTY = 10117;
			/// <summary>
			/// 确认密码不一致，请重新输入
			/// </summary>
			public const int TwoPasswordInconsistency = 10118;
			/// <summary>
			/// 验证码错误，请重新输入
			/// </summary>
			public const int VALIDCODEANDPHONENOEQUAL = 10119;
			/// <summary>
			/// 请求服务器失败
			/// </summary>
			public const int RequestServerFailed = 10120;
			/// <summary>
			/// 恭喜注册成功！
			/// </summary>
			public const int RegisterSuccessTip = 10121;
			/// <summary>
			/// 即将自动登录
			/// </summary>
			public const int WillAutoLogin = 10122;
			/// <summary>
			/// 忘记密码
			/// </summary>
			public const int ForgotPWD = 10123;
			/// <summary>
			/// 确认重置
			/// </summary>
			public const int ComfirmReset = 10124;
			/// <summary>
			/// 修改成功
			/// </summary>
			public const int ResetSuccess = 10125;
			/// <summary>
			/// 你的密码修改成功，请重新登录
			/// </summary>
			public const int ResetScucessPleaseLogin = 10126;
			/// <summary>
			/// 验证码错误，请重新输入
			/// </summary>
			public const int VALIDCODEANDPHONENOEQUAL = 10119;
			/// <summary>
			/// 请求服务器失败
			/// </summary>
			public const int RequestServerFailed = 10120;
			/// <summary>
			/// 恭喜注册成功！
			/// </summary>
			public const int RegisterSuccessTip = 10121;
			/// <summary>
			/// 即将自动登录
			/// </summary>
			public const int WillAutoLogin = 10122;
			/// <summary>
			/// 忘记密码
			/// </summary>
			public const int ForgotPWD = 10123;
			/// <summary>
			/// 确认重置
			/// </summary>
			public const int ComfirmReset = 10124;
			/// <summary>
			/// 修改成功
			/// </summary>
			public const int ResetSuccess = 10125;
			/// <summary>
			/// 你的密码修改成功，请重新登录
			/// </summary>
			public const int ResetScucessPleaseLogin = 10126;
			/// <summary>
			/// 请选择区号
			/// </summary>
			@@ -1067,24 +1130,24 @@
			/// 功能
			/// </summary>
			public const int Function = 11000;
			/// <summary>
			/// 场景
			/// </summary>
			public const int Scence = 11001;
			/// <summary>
			/// 自动化
			/// </summary>
			public const int Automation = 11002;
			/// <summary>
			/// 场景
			/// </summary>
			public const int Scence = 11001;
			/// <summary>
			/// 自动化
			/// </summary>
			public const int Automation = 11002;


			/// <summary>
			/// 没有功能请在个人中心--设备管理处添加
			/// </summary>
			public const int NoFunction = 11010;
			/// <summary>
			/// 编辑
			/// </summary>
			public const int Edit = 11011;
			/// <summary>
			/// 没有功能请在个人中心--设备管理处添加
			/// </summary>
			public const int NoFunction = 11010;
			/// <summary>
			/// 编辑
			/// </summary>
			public const int Edit = 11011;
			/// <summary>
			/// 功能设置
			/// </summary>
			@@ -1102,9 +1165,9 @@
			/// </summary>
			public const int BelongZone = 11015;
			/// <summary>
			/// 所属模块
			/// 所属设备
			/// </summary>
			public const int BelongModel = 11016;
			public const int BelongDevice = 11016;
			/// <summary>
			/// 未知
			/// </summary>
			@@ -1288,82 +1351,82 @@
			/// </summary>
			public const int RoomList = 13100;

			/// <summary>
			/// 选择楼层
			/// </summary>
			public const int SelectFloor = 13101;
			/// <summary>
			/// 选择住宅
			/// </summary>
			public const int ChangeHome = 13102;
			/// <summary>
			/// 新用户登录，请先绑定网关
			/// </summary>
			public const int NewAccountNeedBingGW = 13103;
			/// <summary>
			/// 添加智能网关
			/// </summary>
			public const int AddSmartGW = 13104;
			/// <summary>
			/// 编辑房间
			/// </summary>
			public const int EditRoom = 13105;
			/// <summary>
			/// 房间名称
			/// </summary>
			public const int RoomName = 13106;
			/// <summary>
			/// 所属楼层
			/// </summary>
			public const int BelongFloor = 13107;
			/// <summary>
			/// 温度
			/// </summary>
			public const int Temperature = 13108;
			/// <summary>
			/// 湿度
			/// </summary>
			public const int Humidity = 13109;
			/// <summary>
			/// 当前
			/// </summary>
			public const int Current = 13110;
			/// <summary>
			/// 开
			/// </summary>
			public const int Open = 13111;
			/// <summary>
			/// 关闭
			/// </summary>
			public const int Close = 13112;
			/// <summary>
			/// 不开启
			/// </summary>
			public const int NotOpen = 13113;
			/// <summary>
			/// 秒
			/// </summary>
			public const int Second = 13114;
			/// <summary>
			/// 分钟
			/// </summary>
			public const int Minute = 13115;
			/// <summary>
			/// 小时
			/// </summary>
			public const int Hour = 13116;
			/// <summary>
			/// 未分配
			/// </summary>
			public const int Unallocated = 13117;
			/// <summary>
			/// 全选
			/// </summary>
			public const int AllSelect = 13118;
			/// <summary>
			/// 添加到
			/// </summary>
			public const int AddTo = 13119;
			/// <summary>
			/// 选择楼层
			/// </summary>
			public const int SelectFloor = 13101;
			/// <summary>
			/// 选择住宅
			/// </summary>
			public const int ChangeHome = 13102;
			/// <summary>
			/// 新用户登录，请先绑定网关
			/// </summary>
			public const int NewAccountNeedBingGW = 13103;
			/// <summary>
			/// 添加智能网关
			/// </summary>
			public const int AddSmartGW = 13104;
			/// <summary>
			/// 编辑房间
			/// </summary>
			public const int EditRoom = 13105;
			/// <summary>
			/// 房间名称
			/// </summary>
			public const int RoomName = 13106;
			/// <summary>
			/// 所属楼层
			/// </summary>
			public const int BelongFloor = 13107;
			/// <summary>
			/// 温度
			/// </summary>
			public const int Temperature = 13108;
			/// <summary>
			/// 湿度
			/// </summary>
			public const int Humidity = 13109;
			/// <summary>
			/// 当前
			/// </summary>
			public const int Current = 13110;
			/// <summary>
			/// 开
			/// </summary>
			public const int Open = 13111;
			/// <summary>
			/// 关闭
			/// </summary>
			public const int Close = 13112;
			/// <summary>
			/// 不开启
			/// </summary>
			public const int NotOpen = 13113;
			/// <summary>
			/// 秒
			/// </summary>
			public const int Second = 13114;
			/// <summary>
			/// 分钟
			/// </summary>
			public const int Minute = 13115;
			/// <summary>
			/// 小时
			/// </summary>
			public const int Hour = 13116;
			/// <summary>
			/// 未分配
			/// </summary>
			public const int Unallocated = 13117;
			/// <summary>
			/// 全选
			/// </summary>
			public const int AllSelect = 13118;
			/// <summary>
			/// 添加到
			/// </summary>
			public const int AddTo = 13119;
			/// <summary>
			/// 该房间是分享过来的，不允许进行该操作
			/// </summary>
			@@ -1490,7 +1553,7 @@
			/// <summary>
			/// 选择摆风
			/// </summary>
			public const int SelectSwing=13500;
			public const int SelectSwing = 13500;
			/// <summary>
			/// 自动
			/// </summary>
			@@ -1546,15 +1609,15 @@
			#endregion







			/// <summary>
			/// 密码长度为{0}个字符
			/// </summary>
			public const int PswLengthMsg = 15000;

			/// <summary>
			/// 密码长度为{0}个字符
			/// </summary>
			public const int PswLengthMsg = 15000;
			/// <summary>
			/// 1个小写字母
			/// </summary>
			@@ -3358,7 +3421,7 @@
			/// <summary>
			/// 协调器
			/// </summary>
			public const int uCoordinator= 15514;
			public const int uCoordinator = 15514;
			/// <summary>
			/// 虚拟驱动
			/// </summary>
			@@ -4028,15 +4091,15 @@
			/// </summary>
			public const int uDoorLockAlarmMsg5 = 15699;
			/// <summary>
			/// 门锁报警信息6：常开模式开启
			/// 门锁报警信息6：常开模式开启(门锁触发)
			/// </summary>
			public const int uDoorLockAlarmMsg6 = 15700;
			/// <summary>
			/// 门锁报警信息7：常开模式结束
			/// 门锁报警信息7：常开模式结束(门锁触发)
			/// </summary>
			public const int uDoorLockAlarmMsg7 = 15701;
			/// <summary>
			/// 门锁报警信息8：门铃触发
			/// 门锁报警信息8：有人访问
			/// </summary>
			public const int uDoorLockAlarmMsg8 = 15702;
			/// <summary>
			@@ -4728,7 +4791,7 @@
			/// </summary>
			public const int uGetPictrueFromAlbum = 15874;
			/// <summary>
			/// 出现未知错误
			/// 抱歉，程序出现错误
			/// </summary>
			public const int uUnKnownError = 15875;
			/// <summary>
			@@ -4850,7 +4913,7 @@
			/// <summary>
			/// 跳转到移动设备
			/// </summary>
			public const int uJumpToMobileDevice= 15905;
			public const int uJumpToMobileDevice = 15905;
			/// <summary>
			/// WLAN设置连接家庭WiFi
			/// </summary>
			@@ -5571,6 +5634,123 @@
			/// 修改场景名称失败
			/// </summary>
			public const int uEditorSceneNameFail = 16087;
			/// <summary>
			/// 门锁报警信息9：常开模式开启(网关触发)
			/// </summary>
			public const int uDoorLockAlarmMsg9 = 16088;
			/// <summary>
			/// 门锁报警信息10：常开模式结束(网关触发)
			/// </summary>
			public const int uDoorLockAlarmMsg10 = 16089;
			/// <summary>
			/// 常开模式
			/// </summary>
			public const int uNormallyOpenMode = 16090;
			/// <summary>
			/// 常开模式手动开启
			/// </summary>
			public const int uNormallyOpenModeManualOpen = 16091;
			/// <summary>
			/// 常开模式手动取消
			/// </summary>
			public const int uNormallyOpenModeManualClose = 16092;
			/// <summary>
			/// 常开模式启用{0}小时
			/// </summary>
			public const int uNormallyOpenModeOpenSomeTime = 16093;
			/// <summary>
			/// 您的权限已经变更,请重新登陆
			/// </summary>
			public const int uYouAccessHadChangedPleaseTakeToAdmin = 16094;
			/// <summary>
			/// 我已阅读并同意
			/// </summary>
			public const int uMyHadReadAndAgree = 16095;
			/// <summary>
			/// 隐私权政策
			/// </summary>
			public const int uPrivacyPolicy = 16096;
			/// <summary>
			/// 和
			/// </summary>
			public const int uAnd = 16097;
			/// <summary>
			/// 服务条款
			/// </summary>
			public const int uTermsOfService = 16098;
			/// <summary>
			/// 请先阅读并同意《隐私权政策》和《服务条款》
			/// </summary>
			public const int uPleaseReadAndAgreePrivacyPolicyMsg = 16099;
			/// <summary>
			/// 门锁报警信息11：常开模式开启(自动化触发)
			/// </summary>
			public const int uDoorLockAlarmMsg11 = 16100;
			/// <summary>
			/// 门锁报警信息12：常开模式结束(自动化触发)
			/// </summary>
			public const int uDoorLockAlarmMsg12 = 16101;
			/// <summary>
			/// 门锁报警信息13：临时密码开锁成功
			/// </summary>
			public const int uDoorLockAlarmMsg13 = 16102;
			/// <summary>
			/// 门锁报警信息14：临时密码开锁失败
			/// </summary>
			public const int uDoorLockAlarmMsg14 = 16103;
			/// <summary>
			/// 电机空调模块
			/// </summary>
			public const int uSaecAirConditioningModule = 16104;
			/// <summary>
			/// 东芝空调模块
			/// </summary>
			public const int uToshibaAirConditioningModule = 16105;
			/// <summary>
			/// 格力空调模块
			/// </summary>
			public const int uGreeAirConditioningModule = 16106;
			/// <summary>
			/// 美的空调模块
			/// </summary>
			public const int uMideaAirConditioningModule = 16107;
			/// <summary>
			/// 虚拟网关
			/// </summary>
			public const int uVirtualGateway = 16108;
			/// <summary>
			/// 玄关
			/// </summary>
			public const int uVestibule = 16109;
			/// <summary>
			/// 厨房
			/// </summary>
			public const int uKitchen = 16110;
			/// <summary>
			/// 走廊
			/// </summary>
			public const int uCorridor = 16111;
			/// <summary>
			/// 虚拟账号
			/// </summary>
			public const int uVirtualAccount = 16112;
			/// <summary>
			/// 灯全开
			/// </summary>
			public const int uAllLightOpen = 16113;
			/// <summary>
			/// 灯全关
			/// </summary>
			public const int uAllLightClose = 16114;
			/// <summary>
			/// 常开自动化手动取消
			/// </summary>
			public const int uNormallyOpenLogicManualClose = 16115;
			/// <summary>
			/// 游客体验
			/// </summary>
			public const int uExperienceAccount = 16116;


			//★★★★下面这些是接口的返回信息翻译,从18000开始★★★★
			/// <summary>
			@@ -5798,9 +5978,13 @@
			/// </summary>
			public const int uAddFangyueEnvironmentPanelMsg = 21021;
			/// <summary>
			/// 窗帘面板 -> 长按面板左上角按键，所有按键{0}指示灯亮起，则配网成功
			/// 窗帘面板 -> 长按面板左上角按键，所有按键{0}指示灯亮起，则配网成功
			/// </summary>
			public const int uAddCurtaunPanelMsg = 21022;
			/// <summary>
			/// 吸顶燃气传感器 -> 长按图示按键5秒以上，绿色快闪{0}进入配网状态，绿灯常亮则入网成功
			/// </summary>
			public const int uAddSensorCeilingGasMsg = 21023;


			//★★★★下面这些是模块ID的官方名字,从30000开始★★★★
			@@ -5956,7 +6140,14 @@
			/// 镜像ID为2802的设备的官方名字：S-one
			/// </summary>
			public const int uDeviceModelId2802 = 30037;

			/// <summary>
			/// 镜像ID为2310的设备的默认名字：方悦新风小模块
			/// </summary>
			public const int uDeviceModelId2310 = 30038;
			/// <summary>
			/// 镜像ID为1306的设备的默认名字：Zigbee吸顶燃气传感器
			/// </summary>
			public const int uDeviceModelId1306 = 30039;

			//★★★★下面这些是设备所属种类的翻译名字,从40000开始★★★★
			/// <summary>
			@@ -6031,8 +6222,122 @@
			/// 自定义设备所属ID为16的翻译名字：干接点
			/// </summary>
			public const int uDeviceBelongId16 = 40017;
			/// <summary>
			/// 自定义设备所属ID为2310的翻译名字：新风
			/// </summary>
			public const int uDeviceBelongId2310 = 40018;

			//★★★★模块ID的设备默认备注名字,从50000开始,这里不需要定义,只写在Language.ini文件里面★★★★
			//★★★★模块ID的设备类型名字,从60000开始,这里不需要定义,只写在Language.ini文件里面★★★★

			//★★★★下面这些是添加新设备界面那里显示的名字,从70000开始★★★★
			/// <summary>
			/// 2按键面板
			/// </summary>
			public const int uDeviceDirectionName1 = 70000;
			/// <summary>
			/// 3按键面板
			/// </summary>
			public const int uDeviceDirectionName2 = 70001;
			/// <summary>
			/// 4按键面板
			/// </summary>
			public const int uDeviceDirectionName3 = 70002;
			/// <summary>
			/// 方悦单开双控面板
			/// </summary>
			public const int uDeviceDirectionName4 = 70003;
			/// <summary>
			/// 方悦双开四控面板
			/// </summary>
			public const int uDeviceDirectionName5 = 70004;
			/// <summary>
			/// 方悦四开八控面板
			/// </summary>
			public const int uDeviceDirectionName6 = 70005;
			/// <summary>
			/// 方悦新风小模块
			/// </summary>
			public const int uDeviceDirectionName7 = 70006;
			/// <summary>
			/// 方悦新风面板
			/// </summary>
			public const int uDeviceDirectionName8 = 70007;
			/// <summary>
			/// 方悦环境面板
			/// </summary>
			public const int uDeviceDirectionName9 = 70008;
			/// <summary>
			/// 窗帘面板
			/// </summary>
			public const int uDeviceDirectionName10 = 70009;
			/// <summary>
			/// 3路继电器
			/// </summary>
			public const int uDeviceDirectionName11 = 70010;
			/// <summary>
			/// 1路调光器
			/// </summary>
			public const int uDeviceDirectionName12 = 70011;
			/// <summary>
			/// 窗帘电机
			/// </summary>
			public const int uDeviceDirectionName13 = 70012;
			/// <summary>
			/// 卷帘电机
			/// </summary>
			public const int uDeviceDirectionName14 = 70013;
			/// <summary>
			/// 空调网关
			/// </summary>
			public const int uDeviceDirectionName15 = 70014;
			/// <summary>
			/// 门锁
			/// </summary>
			public const int uDeviceDirectionName16 = 70015;
			/// <summary>
			/// PIR传感器
			/// </summary>
			public const int uDeviceDirectionName17 = 70016;
			/// <summary>
			/// 红外传感器
			/// </summary>
			public const int uDeviceDirectionName18 = 70017;
			/// <summary>
			/// 燃气传感器
			/// </summary>
			public const int uDeviceDirectionName19 = 70018;
			/// <summary>
			/// 烟雾传感器
			/// </summary>
			public const int uDeviceDirectionName20 = 70019;
			/// <summary>
			/// 水浸传感器
			/// </summary>
			public const int uDeviceDirectionName21 = 70020;
			/// <summary>
			/// 门窗传感器
			/// </summary>
			public const int uDeviceDirectionName22 = 70021;
			/// <summary>
			/// 温湿度传感器
			/// </summary>
			public const int uDeviceDirectionName23 = 70022;
			/// <summary>
			/// 中继器
			/// </summary>
			public const int uDeviceDirectionName24 = 70023;
			/// <summary>
			/// 智能空开
			/// </summary>
			public const int uDeviceDirectionName25 = 70024;
			/// <summary>
			/// 吸顶燃气传感器
			/// </summary>
			public const int uDeviceDirectionName26 = 70025;
			/// <summary>
			/// PM2.5空气质量传感器
			/// </summary>
			public const int uDeviceDirectionName27 = 70026;
			}
			}