~wjc/HomeApp.git

			@@ -8,7 +8,7 @@

			namespace Shared.Phone.Device.Logic
			{
			public class SkipView
			public class SkipView:FrameLayout
			{
			/// <summary>
			/// 其它界面跳进来的入口
			@@ -18,7 +18,7 @@
			/// 0.正常自动化;1.门锁自动化;2.Sone门锁;
			switch (intvalue)
			{
			case 0:
			case 0:
			{
			//new一个新逻辑对象；
			//新增正常自动化入口
			@@ -31,69 +31,48 @@
			UserView.HomePage.Instance.PageIndex += 1;
			addLogicPage.Show();

			}
			}
			break;
			case 1:
			case 1:
			{
			//进入门锁联动事件入口
			Send.UserMemberInfoRes = accountObj;
			Send.CurrentDoorLock = doorLock;
			if (accountObj == null)
			{
			///防止抛异常
			Send.UserMemberInfoRes = new UserCenter.MemberInfoRes();
			}
			if (doorLock == null)
			{
			///防止抛异常
			Send.CurrentDoorLock = new DoorLock();
			}
			///进来刷新一次设备列表；
			Common.Logic.LogicDviceList.Clear();
			if (Common.Logic.LogicDviceList.Count == 0)
			{
			Common.Logic.LogicDviceList.AddRange(LocalDevice.Current.listAllDevice.ToArray());
			}
			var doorLockLogicList = new DoorLockLogic.LockLogicList();
			UserView.HomePage.Instance.AddChidren(doorLockLogicList);
			UserView.HomePage.Instance.PageIndex += 1;
			doorLockLogicList.Show();
			}
			break;
			case 2:
			{
			///Sone门锁主入口
			Send.UserMemberInfoRes = accountObj;
			Send.CurrentDoorLock = doorLock;
			if (accountObj == null)
			{
			///防止抛异常
			Send.UserMemberInfoRes = new UserCenter.MemberInfoRes();
			}
			if (doorLock == null)
			{
			///防止抛异常
			doorLock = new DoorLock();
			Send.CurrentDoorLock = new DoorLock();
			}
			Send.CurrentDoorLock = doorLock;
			///进来刷新一次设备列表；
			Common.Logic.LogicDviceList.Clear();
			if (Common.Logic.LogicDviceList.Count == 0)
			{
			Common.Logic.LogicDviceList.AddRange(LocalDevice.Current.listAllDevice.ToArray());
			///进来刷新一次设备列表；
			Common.Logic.LogicDviceList.Clear();
			if (Common.Logic.LogicDviceList.Count == 0)
			{
			Common.Logic.LogicDviceList.AddRange(LocalDevice.Current.listAllDevice.ToArray());
			}
			var addLogicPage = new SoneLogicList();
			UserView.HomePage.Instance.AddChidren(addLogicPage);
			var doorLockLogicList = new DoorLockLogic.LockLogicList();
			UserView.HomePage.Instance.AddChidren(doorLockLogicList);
			UserView.HomePage.Instance.PageIndex += 1;
			addLogicPage.Show();

			}
			doorLockLogicList.Show();
			}
			break;

			}

			}



			#region ◆ 自动化__________________________
			/// <summary>
			/// 自动化功能代码入口
			/// </summary>
			public static void ShowAutotionView(FrameLayout functionSceneAutoBodyView)
			{
			// functionSceneAutoBodyView.BackgroundColor = ZigbeeColor.Current.LogicMiddleBackgroundColor;
			//functionSceneAutoBodyView.BackgroundColor = ZigbeeColor.Current.LogicMiddleBackgroundColor;
			#region ---推荐模板的组件
			//推荐模板背景控件
			var bjFrameLayout = new FrameLayout
			@@ -161,8 +140,8 @@
			X = Application.GetRealWidth(58),
			Y = scenehorizontalScrol.Bottom,
			};
			functionSceneAutoBodyView.AddChidren(logicScrolView);

			functionSceneAutoBodyView.AddChidren(logicScrolView);

			logicScrolView.SetCornerWithSameRadius(Application.GetRealHeight(58), HDLUtils.RectCornerTopLeft);
			bool no = false;
			//显示默认模板的界面事件
			@@ -262,14 +241,17 @@
			//下拉刷新自动化列表的事件
			logicScrolView.BeginHeaderRefreshingAction += () =>
			{
			//重新刷新logic列表
			Common.Logic.LogicList.Clear();
			Read(logicScrolView, no);
			if (!Config.Instance.Home.IsVirtually)
			{//虚拟的不获取网关逻辑列表
			//重新刷新logic列表
			Common.Logic.LogicList.Clear();
			Read(logicScrolView, no);
			}
			//关闭刷新View；
			logicScrolView.EndHeaderRefreshing();
			};

			//自动化
			};

			//自动化
			Read(logicScrolView, no);

			}
			@@ -279,37 +261,48 @@
			/// <param name="logicScrolView"></param>
			private static async void Read(VerticalRefreshLayout logicScrolView, bool no)
			{
			//if (Config.Instance.HomeId != UserCenter.UserCenterResourse.AccountOption.OldHomeStringId)
			//{
			// //切换住宅清除之前缓存数据;
			// Common.Logic.LogicList.Clear();
			// Common.Logic.LockLogicList.Clear();
			// Common.Logic.SoneLogicList.Clear();
			//}

			CommonPage.Loading.Start();
			try
			{
			if (Common.Logic.LogicList.Count == 0)
			if (!Config.Instance.Home.IsVirtually)//虚拟的不获取网关逻辑列表
			{
			var Idlist1 = await Send.GetLogicId(0);//
			var Idlist2 = await Send.GetLogicId(2);//门锁常开模式
			if (Idlist1.Count != 0)
			if (Common.Logic.LogicList.Count == 0)
			{
			var listlogic1 = await Send.ReadList(Idlist1.Count, 0);
			for (int j = 0; j < listlogic1.Count; j++)
			var Idlist1 = await Send.GetLogicId(0);//
			var Idlist2 = await Send.GetLogicId(2);//门锁常开模式
			if (Idlist1.Count != 0)
			{
			var logic = listlogic1[j];
			if (logic.LogicType != 0)
			var listlogic1 = await Send.ReadList(Idlist1.Count, 0);
			for (int j = 0; j < listlogic1.Count; j++)
			{
			continue;
			var logic = listlogic1[j];
			if (logic.LogicType != 0)
			{
			continue;
			}
			Common.Logic.LogicList.Add(logic);
			}
			Common.Logic.LogicList.Add(logic);
			}
			}
			if (Idlist2.Count != 0)
			{
			var listlogic2 = await Send.ReadList(Idlist2.Count, 2);
			for (int j = 0; j < listlogic2.Count; j++)
			if (Idlist2.Count != 0)
			{
			var logic = listlogic2[j];
			if (logic.LogicType != 2)
			var listlogic2 = await Send.ReadList(Idlist2.Count, 2);
			for (int j = 0; j < listlogic2.Count; j++)
			{
			continue;
			var logic = listlogic2[j];
			if (logic.LogicType != 2)
			{
			continue;
			}
			Common.Logic.LogicList.Add(logic);
			}
			Common.Logic.LogicList.Add(logic);
			}
			}
			}
			@@ -329,6 +322,7 @@
			/// <param name="refresview">Refresview.</param>
			private static async void Automationview(VerticalRefreshLayout refresview, bool no)
			{

			refresview.RemoveAll();
			if (Common.Logic.LogicList.Count == 0 && no == false)
			{
			@@ -418,8 +412,8 @@
			fLayout.SetCornerWithSameRadius(Application.GetRealHeight(58), HDLUtils.RectCornerTopLeft);
			logicRowlayout.SetCornerWithSameRadius(Application.GetRealHeight(58), HDLUtils.RectCornerTopLeft);

			}
			i++;
			}
			i++;
			var logicnameBtn = new Button
			{
			Height = Application.GetRealHeight(58),
			@@ -460,7 +454,10 @@
			logic.IsEnable = 0;
			StatusColor(logic, logicRowlayout, 0);
			}
			Send.LogicControlSwitch(logic);
			if (!Config.Instance.Home.IsVirtually)
			{
			Send.LogicControlSwitch(logic);
			}
			//Logic.Send.AddModifyLogic(logic);
			};
			if (logic.IsEnable == 1)
			@@ -516,13 +513,16 @@
			{
			var alert = new UserCenter.ShowMsgControl(UserCenter.ShowMsgType.Confirm,
			Language.StringByID(MyInternationalizationString.doyouwanttodelete),
			Language.StringByID(MyInternationalizationString.confrim));
			alert.Show();
			alert.ConfirmClickEvent += () =>
			Language.StringByID(MyInternationalizationString.confrim));
			alert.Show();
			alert.ConfirmClickEvent += () =>
			{
			Common.Logic.LogicList.Remove(logic);
			Automationview(refresview, no);
			Send.DelLogic(logic.LogicId);
			if (!Config.Instance.Home.IsVirtually)
			{
			Send.DelLogic(logic.LogicId);
			}
			};

			};
			@@ -534,9 +534,9 @@
			Width = Application.GetRealWidth(1080 - 58),
			BackgroundColor = ZigbeeColor.Current.LogicRowLayoutLineColor,
			};
			fLayout.AddChidren(line);


			fLayout.AddChidren(line);


			}

			}
			@@ -574,8 +574,8 @@
			{
			indexlist.Add(linkType);
			}
			}
			//排列图标顺序;
			}
			//排列图标顺序;
			if (indexlist.Contains("0") \|\| indexlist.Contains("8"))
			{
			iconIndexlist.Add("0");
			@@ -698,12 +698,12 @@
			#endregion

			/// <summary>
			/// 门锁取消设置用的方法(相当一个关闭常开模式按钮,分类-自动化-不需要显示该自动化)
			/// 门锁失效设置用的方法(相当一个关闭常开模式按钮,分类-自动化-不需要显示该自动化)
			/// </summary>
			/// <param name="timeVlaue">时间值</param>
			/// <param name="common">设备</param>
			/// <returns></returns>
			public static async System.Threading.Tasks.Task<bool> LockAddModifyLogic(int timeVlaue, CommonDevice common)
			public static async System.Threading.Tasks.Task<int> LockAddModifyLogic(int timeVlaue, CommonDevice common)
			{
			//读取系统当前时间：时-分
			var h = DateTime.Now.ToString("HH");
			@@ -724,6 +724,10 @@
			actionsInfo.Add("Epoint", common.DeviceEpoint);
			actionsInfo.Add("PassData", "055704010113");//默认门锁常关

			Dictionary<string, string> accounts = new Dictionary<string, string>();
			accounts.Add("Option4", common.DeviceAddr.ToString());//用于判断识别是哪个门锁;
			accounts.Add("Option2", common.DeviceEpoint.ToString());

			Common.Logic currentLogic = new Common.Logic();
			currentLogic.IsEnable = 1;//默认为开
			currentLogic.TimeAttribute.Repeat = 0;//执行一次
			@@ -731,51 +735,129 @@
			currentLogic.LogicName = Language.StringByID(R.MyInternationalizationString.openmode);
			currentLogic.Conditions.Add(timeConditionsInfo);
			currentLogic.Actions.Add(actionsInfo);
			currentLogic.Accounts.Add(accounts);
			var logicIfon = await Send.AddModifyLogic(currentLogic);
			if (logicIfon != null && logicIfon.LogicId != 0)
			{
			//添加门锁失效时间的历史记录
			UserCenter.HdlDeviceDoorLockLogic.Current.AddDoorHistoryLog((DoorLock)common, 9003, timeVlaue.ToString());
			return true;//表示添加成功;
			if (logicIfon != null && logicIfon.LogicId != 0)
			{
			//添加门锁失效时间的历史记录
			UserCenter.HdlDeviceDoorLockLogic.Current.AddDoorHistoryLog((DoorLock)common, 9003, timeVlaue.ToString());
			return logicIfon.LogicId;//表示添加成功;
			}
			return false;//表示添加失败;
			return 0;//表示添加失败;

			}

			///<summary>
			/// s-one门锁是否存在自动化的方法;
			/// 注意(参数:2-自动化;3-失效时间自动化);
			///<summary>
			/// s-one门锁是否存在自动化的方法;
			/// 注意(参数:2-常开自动化;3-失效时间自动化);
			/// 返回值：0不存在;其它值都存在;
			/// </summary>
			public static async System.Threading.Tasks.Task<int> Exist(int valueInt=2)
			{
			/// </summary>
			public static async System.Threading.Tasks.Task<int> Exist(int valueInt, ZigBee.Device.DoorLock doorLock)
			{
			int exist = 0;
			var Idlist = await Send.GetLogicId(valueInt);
			if (Idlist.Count != 0)
			var Idlist = await Send.GetLogicId(valueInt);
			if (Idlist.Count != 0)
			{
			//默认取第一个逻辑ID
			exist = Idlist[0];

			var id = Idlist[0];
			if (valueInt != 3)
			{
			exist = id;
			}
			else
			{
			var logic = await Send.GetLogic(id, 3);
			if (logic != null)
			{
			if (ExistLogic(logic, doorLock))
			{
			exist = id;
			}
			else
			{
			exist = 0;
			}
			}
			}
			}
			return exist;
			}

			///<summary>
			///获取逻辑信息
			///<summary>
			///获取门锁逻辑信息
			/// 返回值：null不存在;其它值都存在;
			/// </summary>
			public static async System.Threading.Tasks.Task<Common.Logic> GetLogicIfon()
			{
			/// </summary>
			public static async System.Threading.Tasks.Task<Common.Logic> GetLogicIfon(ZigBee.Device.DoorLock doorLock)
			{
			Common.Logic logic = null;
			var Idlist = await Send.GetLogicId(3);
			if (Idlist.Count != 0)
			var Idlist = await Send.GetLogicId(3);
			if (Idlist.Count != 0)
			{
			//默认取第一个逻辑ID(时效性只有一条逻辑)
			int exist = Idlist[0];
			logic = await Send.GetLogic(exist, 3);
			if (!ExistLogic(logic, doorLock))
			{
			logic = null;
			}
			}
			return logic;
			}

			///<summary>
			///删除该门锁所有时效性自动化
			/// 返回值：true成功;false失败;
			/// </summary>
			public static async System.Threading.Tasks.Task<bool> GetLogicAll(ZigBee.Device.DoorLock doorLock)
			{
			bool _if = false;
			var Idlist = await Send.GetLogicId(3);
			if (Idlist.Count != 0)
			{
			_if = true;

			for (int i = 0; i < Idlist.Count; i++)
			{
			int id = Idlist[i];
			var logic = await Send.GetLogic(id, 3);
			if (logic != null)
			{
			if (ExistLogic(logic, doorLock))
			{
			//本来只有一条时效性自动化，
			//防止特殊情况,找到就删除掉;
			Send.DelLogic(id);
			}
			}
			}
			}
			return _if;
			}

			/// <summary>
			/// 查找这一条自动化是否属于该门锁
			/// </summary>
			/// <returns></returns>
			public static bool ExistLogic(Common.Logic logic, ZigBee.Device.DoorLock doorLock)
			{
			bool yes = false;
			for (int j = 0; j < logic.Accounts.Count; j++)
			{
			//Option4是设备mac；Option2是设备端口；
			if (logic.Accounts[j]["Option4"].ToString() != doorLock.DeviceAddr && logic.Accounts[j]["Option2"].ToString() != doorLock.DeviceEpoint.ToString())
			{
			//查找是否是那个门锁；
			//如果不是该门锁联动事件不显示出来;
			yes = false;
			}
			else
			{
			yes = true;
			}
			}
			return yes;
			}

			}
			}