2020-05-15-1

陈嘉乐

2020-05-15 d5b9ff8bf8cc36f5b13c46b66682f5988d3a6f36

 ZigbeeApp/Shared/Phone/Device/Logic/SkipView.cs

@@ -20,34 +20,16 @@
            {
                case 0:
                    {
                        ///Sone门锁主入口
                        if (doorLock == null)
                        {
                            ///防止抛异常
                            doorLock = new DoorLock();
                        }
                        Send.CurrentDoorLock = doorLock;
                        ///进来刷新一次设备列表；
                        Common.Logic.LogicDviceList.Clear();
                        if (Common.Logic.LogicDviceList.Count == 0)
                        {
                            Common.Logic.LogicDviceList.AddRange(LocalDevice.Current.listAllDevice.ToArray());
                        }
                        var addLogicPage = new SoneLogicList();
                        //new一个新逻辑对象；
                        //新增正常自动化入口
                        Common.Logic.CurrentLogic = new Common.Logic();
                        Common.Logic.CurrentLogic.IsEnable = 1;//默认为开
                        Common.Logic.CurrentLogic.LogicType = 0;//标记逻辑类型
                        Common.Logic.CurrentLogic.LogicName = Language.StringByID(MyInternationalizationString.automation1);
                        var addLogicPage = new AddLogicPage();
                        UserView.HomePage.Instance.AddChidren(addLogicPage);
                        UserView.HomePage.Instance.PageIndex += 1;
                        addLogicPage.Show();

                        ////new一个新逻辑对象；
                        ////新增正常自动化入口
                        //Common.Logic.CurrentLogic = new Common.Logic();
                        //Common.Logic.CurrentLogic.IsEnable = 1;//默认为开
                        //Common.Logic.CurrentLogic.LogicType = 0;//标记逻辑类型
                        //Common.Logic.CurrentLogic.LogicName = Language.StringByID(MyInternationalizationString.automation1);
                        //var addLogicPage = new AddLogicPage();
                        //UserView.HomePage.Instance.AddChidren(addLogicPage);
                        //UserView.HomePage.Instance.PageIndex += 1;
                        //addLogicPage.Show();

                    }
                    break;
@@ -78,40 +60,19 @@
                        doorLockLogicList.Show();
                    }
                    break;
                case 2:
                    {
                        ///Sone门锁主入口
                        if (doorLock == null)
                        {
                            ///防止抛异常
                            doorLock = new DoorLock();
                        }
                        Send.CurrentDoorLock = doorLock;
                        ///进来刷新一次设备列表；
                        Common.Logic.LogicDviceList.Clear();
                        if (Common.Logic.LogicDviceList.Count == 0)
                        {
                            Common.Logic.LogicDviceList.AddRange(LocalDevice.Current.listAllDevice.ToArray());
                        }
                        var addLogicPage = new SoneLogicList();
                        UserView.HomePage.Instance.AddChidren(addLogicPage);
                        UserView.HomePage.Instance.PageIndex += 1;
                        addLogicPage.Show();
                     
                    }
                    break;
              
            }

        }
        

       
        #region ◆ 自动化__________________________
        /// <summary>
        /// 自动化功能代码入口
        /// </summary>
        public static void ShowAutotionView(FrameLayout functionSceneAutoBodyView)
        {
            // functionSceneAutoBodyView.BackgroundColor = ZigbeeColor.Current.LogicMiddleBackgroundColor;
            //functionSceneAutoBodyView.BackgroundColor = ZigbeeColor.Current.LogicMiddleBackgroundColor;
            #region   ---推荐模板的组件
            //推荐模板背景控件
            var bjFrameLayout = new FrameLayout
@@ -280,9 +241,12 @@
            //下拉刷新自动化列表的事件
            logicScrolView.BeginHeaderRefreshingAction += () =>
            {
                //重新刷新logic列表
                Common.Logic.LogicList.Clear();
                Read(logicScrolView, no);
                if (!Config.Instance.Home.IsVirtually)
                {//虚拟的不获取网关逻辑列表
                    //重新刷新logic列表
                    Common.Logic.LogicList.Clear();
                    Read(logicScrolView, no);
                }
                //关闭刷新View；
                logicScrolView.EndHeaderRefreshing();
            };
@@ -297,37 +261,48 @@
        /// <param name="logicScrolView"></param>
        private static async void Read(VerticalRefreshLayout logicScrolView, bool no)
        {
            //if (Config.Instance.HomeId != UserCenter.UserCenterResourse.AccountOption.OldHomeStringId)
            //{
            //    //切换住宅清除之前缓存数据;
            //    Common.Logic.LogicList.Clear();
            //    Common.Logic.LockLogicList.Clear();
            //    Common.Logic.SoneLogicList.Clear();
            //}

            CommonPage.Loading.Start();
            try
            {
                if (Common.Logic.LogicList.Count == 0)
                if (!Config.Instance.Home.IsVirtually)//虚拟的不获取网关逻辑列表
                {
                    var Idlist1 = await Send.GetLogicId(0);//
                    var Idlist2 = await Send.GetLogicId(2);//门锁常开模式
                    if (Idlist1.Count != 0)
                    if (Common.Logic.LogicList.Count == 0)
                    {
                        var listlogic1 = await Send.ReadList(Idlist1.Count, 0);
                        for (int j = 0; j < listlogic1.Count; j++)
                        var Idlist1 = await Send.GetLogicId(0);//
                        var Idlist2 = await Send.GetLogicId(2);//门锁常开模式
                        if (Idlist1.Count != 0)
                        {
                            var logic = listlogic1[j];
                            if (logic.LogicType != 0)
                            var listlogic1 = await Send.ReadList(Idlist1.Count, 0);
                            for (int j = 0; j < listlogic1.Count; j++)
                            {
                                continue;
                                var logic = listlogic1[j];
                                if (logic.LogicType != 0)
                                {
                                    continue;
                                }
                                Common.Logic.LogicList.Add(logic);
                            }
                            Common.Logic.LogicList.Add(logic);
                        }
                    }
                    if (Idlist2.Count != 0)
                    {
                        var listlogic2 = await Send.ReadList(Idlist2.Count, 2);
                        for (int j = 0; j < listlogic2.Count; j++)
                        if (Idlist2.Count != 0)
                        {
                            var logic = listlogic2[j];
                            if (logic.LogicType != 2)
                            var listlogic2 = await Send.ReadList(Idlist2.Count, 2);
                            for (int j = 0; j < listlogic2.Count; j++)
                            {
                                continue;
                                var logic = listlogic2[j];
                                if (logic.LogicType != 2)
                                {
                                    continue;
                                }
                                Common.Logic.LogicList.Add(logic);
                            }
                            Common.Logic.LogicList.Add(logic);
                        }
                    }
                }
@@ -347,6 +322,7 @@
        /// <param name="refresview">Refresview.</param>
        private static async void Automationview(VerticalRefreshLayout refresview, bool no)
        {
            
            refresview.RemoveAll();
            if (Common.Logic.LogicList.Count == 0 && no == false)
            {
@@ -478,7 +454,10 @@
                        logic.IsEnable = 0;
                        StatusColor(logic, logicRowlayout, 0);
                    }
                    Send.LogicControlSwitch(logic);
                    if (!Config.Instance.Home.IsVirtually)
                    {
                        Send.LogicControlSwitch(logic);
                    }
                    //Logic.Send.AddModifyLogic(logic);
                };
                if (logic.IsEnable == 1)
@@ -540,7 +519,10 @@
                    {
                        Common.Logic.LogicList.Remove(logic);
                        Automationview(refresview, no);
                        Send.DelLogic(logic.LogicId);
                        if (!Config.Instance.Home.IsVirtually)
                        {
                            Send.DelLogic(logic.LogicId);
                        }
                    };

                };
@@ -716,12 +698,12 @@
        #endregion

        /// <summary>
        /// 门锁取消设置用的方法(相当一个关闭常开模式按钮,分类-自动化-不需要显示该自动化)
        /// 门锁失效设置用的方法(相当一个关闭常开模式按钮,分类-自动化-不需要显示该自动化)
        /// </summary>
        /// <param name="timeVlaue">时间值</param>
        /// <param name="common">设备</param>
        /// <returns></returns>
        public static async System.Threading.Tasks.Task<bool> LockAddModifyLogic(int timeVlaue, CommonDevice common)
        public static async System.Threading.Tasks.Task<int> LockAddModifyLogic(int timeVlaue, CommonDevice common)
        {
            //读取系统当前时间：时-分
            var h = DateTime.Now.ToString("HH");
@@ -742,6 +724,10 @@
            actionsInfo.Add("Epoint", common.DeviceEpoint);
            actionsInfo.Add("PassData", "055704010113");//默认门锁常关

            Dictionary<string, string> accounts = new Dictionary<string, string>();
            accounts.Add("Option4", common.DeviceAddr.ToString());//用于判断识别是哪个门锁;
            accounts.Add("Option2", common.DeviceEpoint.ToString());

            Common.Logic currentLogic = new Common.Logic();
            currentLogic.IsEnable = 1;//默认为开
            currentLogic.TimeAttribute.Repeat = 0;//执行一次
@@ -749,14 +735,15 @@
            currentLogic.LogicName = Language.StringByID(R.MyInternationalizationString.openmode);
            currentLogic.Conditions.Add(timeConditionsInfo);
            currentLogic.Actions.Add(actionsInfo);
            currentLogic.Accounts.Add(accounts);
            var logicIfon = await Send.AddModifyLogic(currentLogic);
            if (logicIfon != null && logicIfon.LogicId != 0)
            {
                //添加门锁失效时间的历史记录
                UserCenter.HdlDeviceDoorLockLogic.Current.AddDoorHistoryLog((DoorLock)common, 9003, timeVlaue.ToString());
                return true;//表示添加成功;
                return logicIfon.LogicId;//表示添加成功;
            }
            return false;//表示添加失败;
            return 0;//表示添加失败;

        }

@@ -765,24 +752,42 @@
        /// 注意(参数:2-常开自动化;3-失效时间自动化);
        /// 返回值：0不存在;其它值都存在;
        /// </summary>
        public static async System.Threading.Tasks.Task<int> Exist(int valueInt)
        public static async System.Threading.Tasks.Task<int> Exist(int valueInt, ZigBee.Device.DoorLock doorLock)
        {
            int exist = 0;
            var Idlist = await Send.GetLogicId(valueInt);
            if (Idlist.Count != 0)
            {
                //默认取第一个逻辑ID
                exist = Idlist[0];

                var id = Idlist[0];
                if (valueInt != 3)
                {
                    exist = id;
                }
                else
                {
                    var logic = await Send.GetLogic(id, 3);
                    if (logic != null)
                    {
                        if (ExistLogic(logic, doorLock))
                        {
                            exist = id;
                        }
                        else
                        {
                            exist = 0;
                        }
                    }
                }
            }
            return exist;
        }

        ///<summary>
        ///获取逻辑信息
        ///获取门锁逻辑信息
        /// 返回值：null不存在;其它值都存在;
        /// </summary>
        public static async System.Threading.Tasks.Task<Common.Logic> GetLogicIfon()
        public static async System.Threading.Tasks.Task<Common.Logic> GetLogicIfon(ZigBee.Device.DoorLock doorLock)
        {
            Common.Logic logic = null;
            var Idlist = await Send.GetLogicId(3);
@@ -791,15 +796,19 @@
                //默认取第一个逻辑ID(时效性只有一条逻辑)
                int exist = Idlist[0];
                logic = await Send.GetLogic(exist, 3);
                if (!ExistLogic(logic, doorLock))
                {
                    logic = null;
                }
            }
            return logic;
        }

        ///<summary>
        ///删除所有时效性自动化
        ///删除该门锁所有时效性自动化
        /// 返回值：true成功;false失败;
        /// </summary>
        public static async System.Threading.Tasks.Task<bool> GetLogicAll()
        public static async System.Threading.Tasks.Task<bool> GetLogicAll(ZigBee.Device.DoorLock doorLock)
        {
            bool _if = false;
            var Idlist = await Send.GetLogicId(3);
@@ -810,15 +819,45 @@
                for (int i = 0; i < Idlist.Count; i++)
                {
                    int id = Idlist[i];
                    //本来只有一条时效性自动化，
                    //防止特殊情况,找到就删除掉;
                    Send.DelLogic(id);
                    var logic = await Send.GetLogic(id, 3);
                    if (logic != null)
                    {
                        if (ExistLogic(logic, doorLock))
                        {
                            //本来只有一条时效性自动化，
                            //防止特殊情况,找到就删除掉;
                            Send.DelLogic(id);
                        }
                    }
                }
            }
            return _if;
        }

     
        /// <summary>
        /// 查找这一条自动化是否属于该门锁
        /// </summary>
        /// <returns></returns>
        public static bool ExistLogic(Common.Logic logic, ZigBee.Device.DoorLock doorLock)
        {
            bool yes = false;
            for (int j = 0; j < logic.Accounts.Count; j++)
            {
                //Option4是设备mac；Option2是设备端口；
                if (logic.Accounts[j]["Option4"].ToString() != doorLock.DeviceAddr && logic.Accounts[j]["Option2"].ToString() != doorLock.DeviceEpoint.ToString())
                {
                    //查找是否是那个门锁；
                    //如果不是该门锁联动事件不显示出来;
                    yes = false;
                }
                else
                {
                    yes = true;
                }
            }
            return yes;
        }

    }
}