| | |
| | | { |
| | | continue; |
| | | } |
| | | switch (f.localFunction.functionType) |
| | | switch (f.localFunction.spk) |
| | | { |
| | | case FunctionType.Curtain: |
| | | case SPK.CurtainSwitch: |
| | | foreach (var attr in f.status) |
| | | { |
| | | if (attr.key == FunctionAttributeKey.OnOff) |
| | |
| | | } |
| | | } |
| | | break; |
| | | case FunctionType.AC: |
| | | case SPK.AcStandard: |
| | | AC tempAc = new AC(); |
| | | foreach (var attr in f.status) |
| | | { |
| | |
| | | ControlBytesSend(Command.InstructionPanelKey, f.localFunction.bus.SubnetID, f.localFunction.bus.DeviceID, new byte[] { modeKey, Convert.ToByte(tempAc.trait_temp.curValue), f.localFunction.bus.LoopId }); |
| | | } |
| | | break; |
| | | case FunctionType.Relay: |
| | | case FunctionType.Dimmer: |
| | | case SPK.LightSwitch: |
| | | case SPK.LightDimming: |
| | | byte brightness = 0; |
| | | foreach (var attr in f.status) |
| | | { |
| | |
| | | ControlBytesSend(Command.SetSingleLight, f.localFunction.bus.SubnetID, f.localFunction.bus.DeviceID, |
| | | new byte[] { f.localFunction.bus.LoopId, brightness, (byte)(f.localFunction.delay / 255), (byte)(f.localFunction.delay % 255) }); |
| | | break; |
| | | case FunctionType.RGB: |
| | | case SPK.LightRGB: |
| | | break; |
| | | case FunctionType.FloorHeating: |
| | | case SPK.FloorHeatStandard: |
| | | var tempFh = new FloorHeating(); |
| | | foreach (var attr in f.status) |
| | | { |
| | |
| | | ControlBytesSend(Command.SetFloorHeat, f.localFunction.bus.SubnetID, f.localFunction.bus.DeviceID, new byte[] { |
| | | f. localFunction.bus.LoopId, b1, 0, tempFh.curModeIndex, Convert.ToByte( tempFh.trait_temp.curValue), Convert.ToByte( tempFh.trait_temp.curValue), Convert.ToByte( tempFh.trait_temp.curValue), Convert.ToByte( tempFh.trait_temp.curValue), 0, 0 }); |
| | | break; |
| | | case FunctionType.Socket: |
| | | case SPK.ElectricSocket: |
| | | foreach (var attr in f.status) |
| | | { |
| | | if (attr.key == FunctionAttributeKey.OnOff) |
| | |
| | | var deviceId = function.bus.DeviceID; |
| | | var loopId = function.bus.LoopId; |
| | | |
| | | switch (function.functionCategory) |
| | | switch (function.Spk_Prefix) |
| | | { |
| | | case FunctionCategory.Light: |
| | | var light = function as Light; |
| | | switch (light.functionType) |
| | | switch (light.spk) |
| | | { |
| | | case FunctionType.RGB: |
| | | case SPK.LightRGB: |
| | | MainPage.Log($"rgb level : {light.brightness}"); |
| | | byte b = 100;//开关操作依据on_off字段,实际开关值依据brightness,当on_off为打开,brightness不能为0 |
| | | if (light.trait_on_off.curValue.ToString() == "off") |
| | |
| | | 0,0}; |
| | | ControlBytesSend(Command.SetLogicLoopColor, subnetId, deviceId, bytes, 1); |
| | | break; |
| | | case FunctionType.Dimmer: |
| | | case SPK.LightDimming: |
| | | byte b1 = 100; |
| | | if (light.trait_on_off.curValue.ToString() == "off") |
| | | { |
| | |
| | | 0, Convert.ToByte(light.fadeTime) }); |
| | | //DimmerPage.UpdataStates(light); |
| | | break; |
| | | case FunctionType.Relay: |
| | | case SPK.LightSwitch: |
| | | ControlBytesSend(Command.SetSingleLight, subnetId, deviceId, new byte[] { function.bus.LoopId, light.trait_on_off.curValue.ToString() == "on" ? (byte)100 : (byte)0, 0, 0 }); |
| | | //RelayPage.UpdataState(light); |
| | | break; |
| | |
| | | break; |
| | | case FunctionCategory.Curtain: |
| | | var curtain = function as Curtain; |
| | | switch (curtain.functionType) |
| | | switch (curtain.spk) |
| | | { |
| | | case FunctionType.Curtain: |
| | | case SPK.CurtainSwitch: |
| | | byte b1 = 0; |
| | | if (curtain.trait_on_off.curValue.ToString() == "stop") |
| | | { |
| | |
| | | } |
| | | ControlBytesSend(Command.SetCurtainModelStutas, subnetId, deviceId, new byte[] { curtain.bus.LoopId, b1 }); |
| | | break; |
| | | case FunctionType.MotorCurtain: |
| | | case FunctionType.RollingShutter: |
| | | case SPK.CurtainTrietex: |
| | | case SPK.CurtainRoller: |
| | | //if (commandDictionary.Count > 0) |
| | | //{ |
| | | if (curtain.trait_on_off.curValue.ToString() == "stop") |
| | |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.Thermostat: |
| | | switch (function.functionType) |
| | | case FunctionCategory.AC: |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.AC: |
| | | case SPK.AcStandard: |
| | | var aC = function as AC; |
| | | ControlBytesSend(Command.SetACMode, subnetId, deviceId, new byte[] { aC.bus.LoopId, (byte)aC.curTempType, 32, 32, 32, 32, 32, 0, aC.trait_on_off.curValue.ToString() == "on" ? (byte)1 : (byte)0, aC.curModeIndex, aC.curFanIndex, Convert.ToByte(aC.trait_temp.curValue), 0 }); |
| | | //ControlBytesSend(Command.InstructionPanelKey, aC.bus_Data.SubnetID, aC.bus_Data.DeviceID, new byte[] { 3, aC.on_off == "on" ? (byte)1 : (byte)0, aC.bus_Data.loopId }); |
| | |
| | | } |
| | | |
| | | break; |
| | | case FunctionType.FloorHeating: |
| | | } |
| | | break; |
| | | case FunctionCategory.FloorHeat: |
| | | switch (function.spk) { |
| | | case SPK.FloorHeatStandard: |
| | | var fh = function as FloorHeating; |
| | | if (fh.modeTemp.Count == 4) |
| | | { |
| | |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.Electrical: |
| | | switch (function.functionType) |
| | | case FunctionCategory.Electric: |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.Fan: |
| | | case SPK.ElectricFan: |
| | | var fan = function as Fan; |
| | | if (fan.trait_on_off.curValue.ToString() == "on") |
| | | { |
| | |
| | | ControlBytesSend(Command.SetSingleLight, subnetId, deviceId, new byte[] { fan.bus.LoopId, 0 }); |
| | | } |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.SwitchDevice: |
| | | switch (function.functionType) |
| | | { |
| | | case FunctionType.Socket: |
| | | case SPK.ElectricSocket: |
| | | var s = function as SwitchSocket; |
| | | ControlBytesSend(Command.SetSingleLight, subnetId, deviceId, new byte[] { s.bus.LoopId, s.trait_on_off.curValue.ToString() == "on" ? (byte)100 : (byte)0 }); |
| | | break; |
| | |
| | | var deviceId = function.bus.DeviceID; |
| | | var loopId = function.bus.LoopId; |
| | | |
| | | switch (function.functionCategory) |
| | | switch (function.Spk_Prefix) |
| | | { |
| | | case FunctionCategory.Light: |
| | | switch (function.functionType) |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.Relay: |
| | | case FunctionType.Dimmer: |
| | | case SPK.LightSwitch: |
| | | case SPK.LightDimming: |
| | | ControlBytesSend(Command.ReadLightAllLoopBrightness, subnetId, deviceId, new byte[] { }); |
| | | break; |
| | | case FunctionType.RGB: |
| | | case SPK.LightRGB: |
| | | ControlBytesSend(Command.ReadLogicLoopColor, subnetId, deviceId, new byte[] { function.bus.LoopId }); |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.Curtain: |
| | | switch (function.functionType) |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.Curtain: |
| | | case FunctionType.MotorCurtain: |
| | | case FunctionType.RollingShutter: |
| | | case SPK.CurtainSwitch: |
| | | case SPK.CurtainTrietex: |
| | | case SPK.CurtainRoller: |
| | | ControlBytesSend(Command.ReadCurtainStatus, subnetId, deviceId, new byte[] { function.bus.LoopId }); |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.Thermostat: |
| | | switch (function.functionType) |
| | | case FunctionCategory.AC: |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.AC: |
| | | case SPK.AcStandard: |
| | | ControlBytesSend(Command.ReadACMode, subnetId, deviceId, new byte[] { function.bus.LoopId }); |
| | | break; |
| | | case FunctionType.FloorHeating: |
| | | } |
| | | break; |
| | | case FunctionCategory.FloorHeat: |
| | | switch (function.spk) |
| | | { |
| | | case SPK.FloorHeatStandard: |
| | | ControlBytesSend(Command.ReadFloorHeat, subnetId, deviceId, new byte[] { function.bus.LoopId }); |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.Electrical: |
| | | switch (function.functionType) |
| | | case FunctionCategory.Electric: |
| | | switch (function.spk) |
| | | { |
| | | case FunctionType.Fan: |
| | | case SPK.ElectricFan: |
| | | var fan = function as Fan; |
| | | ControlBytesSend(Command.SetSingleLight, subnetId, deviceId, new byte[] { fan.bus.LoopId }); |
| | | break; |
| | | } |
| | | break; |
| | | case FunctionCategory.SwitchDevice: |
| | | switch (function.functionType) |
| | | { |
| | | case FunctionType.Socket: |
| | | case SPK.ElectricSocket: |
| | | var s = function as SwitchSocket; |
| | | ControlBytesSend(Command.SetSingleLight, subnetId, deviceId, new byte[] { s.bus.LoopId }); |
| | | break; |
| | |
| | | break; |
| | | case FunctionCategory.Sensor: |
| | | var sensor = function as Sensor; |
| | | ControlBytesSend(Command.ReadDeviceLoopInfo, subnetId, deviceId, new byte[] { (byte)5, |
| | | (byte)((int)sensor.functionType % 256), sensor.bus.LoopId }); |
| | | byte sensorType = 0; |
| | | switch (function.spk) |
| | | { |
| | | case SPK.SensorTemperature: |
| | | sensorType = 2; |
| | | break; |
| | | case SPK.SensorHumidity: |
| | | sensorType = 3; |
| | | break; |
| | | case SPK.SensorTVOC: |
| | | sensorType = 5; |
| | | break; |
| | | case SPK.SensorPm25: |
| | | sensorType = 6; |
| | | break; |
| | | case SPK.SensorCO2: |
| | | sensorType = 7; |
| | | break; |
| | | } |
| | | ControlBytesSend(Command.ReadDeviceLoopInfo, subnetId, deviceId, new byte[] { 5, sensorType, sensor.bus.LoopId }); |
| | | break; |
| | | } |
| | | } |