~xm/HomeApp.git

old mode 100755 new mode 100644

			@@ -264,7 +264,7 @@
			public readonly static int AfterFiftySeconds = 178;
			//门锁验证密码失败
			public readonly static int OperrateFailed = 179;
			public readonly static int RemoteUnlockBindSucessTip1 = 180;
			public readonly static int RemoteUnlockBindSucessTip = 180;
			public readonly static int RemoteUnlockBindSucessTip2 = 181;
			public readonly static int CLose = 182;
			public readonly static int Opening = 183;
			@@ -306,29 +306,614 @@
			public readonly static int UnlockFailed = 219;
			public readonly static int DoorlockPasswordDispear = 220;
			public readonly static int BindUnknownError = 221;
			public readonly static int OffLineScene = 222;
			public readonly static int SureClearKeyModeAndTargets = 223;
			public readonly static int BindDeviceTargetIsEmpty = 224;
			public readonly static int PanelBindTargets = 225;
			public readonly static int ClearAllTargets = 226;
			public readonly static int ClearAllTargeta2 = 227;
			public readonly static int DoorlockConfirm = 228;
			public readonly static int DistributeSuccess = 229;
			public readonly static int SureToUnFreeze = 230;

			public readonly static int RemindSetting = 548;
			public readonly static int AddNewUser = 650;
			public readonly static int Headshot = 551;
			public readonly static int Edited = 552;
			public readonly static int UneditFingerprint = 553;
			public readonly static int UneditPassword = 554;
			public readonly static int UneditProximityCard = 555;
			public readonly static int EditScence = 556;
			public readonly static int UnEditedScene = 557;
			public readonly static int NewName = 558;
			public readonly static int OldName = 559;
			public readonly static int SystemSetting = 560;
			public readonly static int PasswordList = 561;
			public readonly static int UserRemark = 562;
			public readonly static int UserTempPassword = 563;
			public readonly static int ProximityCard = 564;
			public readonly static int MaxValicCount = 668;
			public readonly static int ValidCount = 670;
			public readonly static int AllRecord = 639;
			public readonly static int ReFresh = 681;
			public static readonly int AccountRegisterSuccess = 691;
			/// <summary>
			/// 接近感应
			/// </summary>
			public const int ProximitySensors = 231;

			/// <summary>
			/// 接近感应功能设置置失败
			/// </summary>
			public const int SetPannelProximityFail = 232;
			/// <summary>
			/// 获取接近感应功能失败
			/// </summary>
			public const int GetPanelProximityFail = 233;
			/// <summary>
			/// 按住面板模式按键5秒，绿色指示灯闪烁{0}进入配网状态；闪烁停止{0}指示灯变白色表示配网成功
			/// </summary>
			public const int AddFreshAirPanelMsg = 235;
			/// <summary>
			///绿色指示灯闪烁
			/// </summary>
			public const int GreenLightLighting = 236;
			/// <summary>
			/// 指示灯
			/// </summary>
			public const int IndicatorLight = 237;
			/// <summary>
			/// 长按5秒（按键）
			/// </summary>
			public const int LongPressFiveSecond = 238;
			/// <summary>
			/// 长按
			/// </summary>
			public const int AddFreshAirModulPanelMsg = 239;
			/// <summary>
			/// 设置常开模式后，您的门锁将始终{0}处于打开状态，确认开启？
			/// </summary>
			public const int SetDoorLockNomallyOpen = 241;
			/// <summary>
			/// 电量
			/// </summary>
			public const int DoorLockPower = 242;
			/// <summary>
			/// 常开模式已开启
			/// </summary>
			public const int NomallyModeIsTurnOn = 243;
			/// <summary>
			/// 失效设置
			/// </summary>
			public const int DoorLockInValidSetting = 244;
			/// <summary>
			/// 自动化
			/// </summary>
			public const int DoorLockLogic = 245;
			/// <summary>
			/// 门锁始终打开{0}小时
			/// </summary>
			public const int DoorLockOpenAllTheTime = 246;
			/// <summary>
			/// 当前时区
			/// </summary>
			public const int DoorLockCurrentZone = 247;
			/// <summary>
			/// 取消常开
			/// </summary>
			public const int CancelNomallyMode = 248;
			/// <summary>
			/// 您的常开模式将被取消
			/// </summary>
			public const int NomallyModeIsCanceled = 249;
			/// <summary>
			/// 保持常开
			/// </summary>
			public const int KeepNomallyMode = 250;
			/// <summary>
			/// 确认取消
			/// </summary>
			public const int SureCancel = 251;
			/// <summary>
			/// (本次操作仅为单次取消，若需要停止执行{0}自动化，请选择分类-自动化进行设置)
			/// </summary>
			public const int XingTip = 252;

			/// <summary>
			/// 获取门锁常开模式失败
			/// </summary>
			public const int GetNormallyOpenModeFailed = 253;
			/// <summary>
			/// 打开门锁常开模式成功
			/// </summary>
			public const int OpenNormallyOpenModeSuccess = 254;
			/// <summary>
			/// 打开门锁常开模式失败
			/// </summary>
			public const int OpenNormallyOpenModeFailed = 255;
			/// <summary>
			/// 关闭门锁常开模式成功
			/// </summary>
			public const int CloseNormallyOpenModeSuccess = 256;
			/// <summary>
			/// 关闭门锁常开模式失败
			/// </summary>
			public const int CloseNormallyOpenModeFailed = 257;
			/// <summary>
			/// 门锁已经开启
			/// </summary>
			public const int CurrentNormallyOpenMode = 258;
			/// <summary>
			/// 失效时间不合法，请重写设置
			/// </summary>
			public const int NormallyOpenModeInvalidTimeTip = 259;
			/// <summary>
			/// 音量设置失败
			/// </summary>
			public const int SetVolumeFailed = 260;
			/// <summary>
			/// 音量设置成功
			/// </summary>
			public const int SetVolumeSuccess = 261;
			/// <summary>
			/// 当前时区
			/// </summary>
			public const int CurZone = 262;
			/// <summary>
			/// 区
			/// </summary>
			public const int CurZoneText = 263;
			/// <summary>
			/// 东
			/// </summary>
			public const int East = 264;
			/// <summary>
			/// 西
			/// </summary>
			public const int West = 265;
			/// <summary>
			/// 当前设备不线
			/// </summary>
			public const int DoorLockOffLine = 266;
			/// <summary>
			/// 获取音量失败
			/// </summary>
			public const int GetVolumeFailed = 267;
			/// <summary>
			/// 确定要取消该成员拥有远程开锁权限吗？
			/// </summary>
			public const int SureCancelAccessToSubaccount = 268;
			/// <summary>
			/// 时区
			/// </summary>
			public const int CurZoneText0 = 269;
			public const int CurZoneText1 = 270;
			public const int CurZoneText2 = 271;
			public const int CurZoneText3 = 272;
			public const int CurZoneText4 = 273;
			public const int CurZoneText5 = 274;
			public const int CurZoneText6 = 275;
			public const int CurZoneText7 = 276;
			public const int CurZoneText8 = 277;
			public const int CurZoneText9 = 278;
			public const int CurZoneText10 = 279;
			public const int CurZoneText11 = 280;
			public const int CurZoneText12 = 281;
			public const int WestZoneText1 = 282;
			public const int WestZoneText2 = 283;
			public const int WestZoneText3 = 284;
			public const int WestZoneText4 = 285;
			public const int WestZoneText5 = 286;
			public const int WestZoneText6 = 287;
			public const int WestZoneText7 = 288;
			public const int WestZoneText8 = 289;
			public const int WestZoneText9 = 290;
			public const int WestZoneText10 = 291;
			public const int WestZoneText11 = 292;
			public const int WestZoneText12 = 293;
			/// <summary>
			/// 生效日期不能小于当前日期
			/// </summary>
			public const int ValidTimeNoLessThanCurrentTime = 294;
			/// <summary>
			/// 生效时间不能大于失效时间
			/// </summary>
			public const int ValidTimeNoMoreThanInValidTime = 295;
			/// <summary>
			/// 失效时间不能小于生效时间
			/// </summary>
			public const int InvalidTimeNoLessThanValidTime = 296;
			/// <summary>
			/// 失效时间不能省略
			/// </summary>
			public const int InvalidTimeIsEmpty = 297;
			/// <summary>
			/// 失效时间不能大于72小时
			/// </summary>
			public const int InvalidTimeMoreThan72 = 298;
			/// <summary>
			/// 失效时间不能小于1小时
			/// </summary>
			public const int InvalidTimeLessThan1 = 299;
			/// <summary>
			/// 新风
			/// </summary>
			public const int FreshAir = 300;
			/// <summary>
			/// 非管理员不能在常开模式下操作
			/// </summary>
			public const int OnlyMasterOperate = 301;
			/// <summary>
			/// 绑定新风
			/// </summary>
			public const int BindFreshAirTarget = 302;
			/// <summary>
			/// 温度来源
			/// </summary>
			public const int TemperatureSource = 303;
			/// <summary>
			/// 湿度来源
			/// </summary>
			public const int HumiditySource = 304;
			/// <summary>
			/// PM2.5来源
			/// </summary>
			public const int PM25Source = 305;
			/// <summary>
			/// 警告！此次常开模式默认门锁一直开着，没有实现自动关闭功能
			/// </summary>
			public const int AddLogicNormallyModeFailed = 307;
			/// <summary>
			/// 警告！时效性常开删除失败。
			/// </summary>
			public const int CancelLogicNormallyModeFailed = 308;
			/// <summary>
			/// 时效性常开删除失败，继续“常开模式”请前往门锁用户界面设置
			/// </summary>
			public const int CancelLogicNormallyModeFailed2 = 309;
			/// <summary>
			/// 请输入合法的数字
			/// </summary>
			public const int IllegalNumber = 310;
			/// <summary>
			/// 手动
			/// </summary>
			public const int Manual = 311;
			/// <summary>
			/// 背光灯颜色
			/// </summary>
			public const int BackgroundLightColor = 312;
			/// <summary>
			/// PM2.5感器 -> 长按图示按键5秒以上，信号图标{0}快闪，进入配网状态。信号图标常亮则配网成功
			/// </summary>
			public const int AddSensorPMMsg = 313;
			/// <summary>
			/// 自动模式不支持操作
			/// </summary>
			public const int AutoModeForbiddenOperate = 314;
			/// <summary>
			/// 空气质量
			/// </summary>
			public const int AirQuality = 315;
			/// <summary>
			/// 空气质量传感器
			/// </summary>
			public const int AirQualitySensor = 316;
			/// <summary>
			/// 优
			/// </summary>
			public const int ExcellentAirQuality = 317;
			/// <summary>
			/// 良
			/// </summary>
			public const int GoodAirQuality = 318;
			/// <summary>
			/// 轻度污染
			/// </summary>
			public const int LightPollution = 319;
			/// <summary>
			/// 中度污染
			/// </summary>
			public const int Moderatelyolluted = 320;
			/// <summary>
			/// 重度污染
			/// </summary>
			public const int HeavyPollution = 321;
			/// <summary>
			/// 严重污染
			/// </summary>
			public const int SeriousPollution = 322;
			/// <summary>
			/// 门锁常开模式已关
			/// </summary>
			public const int NormallyClosed = 323;
			/// <summary>
			/// 入网
			/// </summary>
			public const int Connection = 324;
			/// <summary>
			/// 简约多功能面板 -> 打开面板主菜单，右上角点击{0}设置按钮，点击入网
			/// </summary>
			public const int AddSimpleMultifunctionMsg = 325;
			/// <summary>
			/// 简约环境面板 -> 长按“开关”按键5秒，所有灯每进行{0}2次亮暗切换，即入网成功
			/// </summary>
			public const int AddSimpleEnvironmentMsg = 326;
			/// <summary>
			/// 长按“开关”按键5秒
			/// </summary>
			public const int LongPressButtonSwitch = 327;
			/// <summary>
			/// 最多可添加{0}个
			/// </summary>
			public const int AddMoreTip = 328;
			/// <summary>
			/// 绑定
			/// </summary>
			public const int Bind = 329;
			/// <summary>
			/// 330=该设备是继电器，当前只支持带有调光的灯光绑定
			/// </summary>
			public readonly static int CanSelectDimmer = 330;
			/// <summary>
			/// 该设备是调光灯，当前只支持不带有调光的灯光绑定
			/// </summary>
			public readonly static int CanSelectRelay = 331;
			/// <summary>
			/// 空调目标
			/// </summary>
			public const int AcTargets = 332;
			/// <summary>
			/// 不绑定任何目标
			/// </summary>
			public const int BindEmptyTargets = 333;
			/// <summary>
			/// /睡眠时间
			/// </summary>
			public const int SleepTime = 334;
			/// <summary>
			/// 警告！数据出错，必须刷新列表，否则控制现象错乱
			/// </summary>
			public const int UpdateBindList = 335;
			/// <summary>
			/// 同步
			/// </summary>
			public const int Synchronization = 336;
			/// <summary>
			/// 同步失败
			/// </summary>
			public const int SynchronizationFailed = 337;
			/// <summary>
			/// 数据校正
			/// </summary>
			public const int DataCorrection = 338;
			/// <summary>
			/// 339=矫正温度失败
			/// </summary>
			public const int DataCorrectionFailed = 339;
			/// <summary>
			/// 340=矫正面板内置的温度或湿度传感器读数
			/// </summary>
			public const int DataCorrectionTip = 340;
			/// <summary>
			/// 341=请输入正确的数值
			/// </summary>
			public const int NumTip = 341;
			/// <summary>
			/// 342=请输入正确的温度值
			/// </summary>
			public const int TNumTip = 342;
			/// <summary>
			/// 343=请输入正确的湿度值
			/// </summary>
			public const int HNumTip = 343;
			/// <summary>
			/// 344=注意绑定目标的名称不超过6个汉字{0}或20个字母和数字哦，否则面板将{0}无法显示
			/// </summary>
			public const int BindRemarkTip1 = 344;
			/// <summary>
			/// 345=目标名称太长
			/// </summary>
			public const int BindRemarkTip2 = 345;
			/// <summary>
			/// 346=知道了
			/// </summary>
			public const int Iknown = 346;
			/// <summary>
			/// 晾衣架
			/// </summary>
			public const int Airer = 347;
			/// <summary>
			/// 环境
			/// </summary>
			public const int Envoronment = 348;
			/// <summary>
			/// 蓝色指示灯快速闪烁
			/// </summary>
			public const int uSignalIcon349 = 349;
			/// <summary>
			/// 同时长按，{0}“上行”和“下行”键5-10秒
			/// </summary>
			public const int uSignalIcon350 = 350;
			/// <summary>
			/// 晾衣架上电后，发出蜂鸣声时，{0}同时按“上行”和“下行”键5-10秒
			/// </summary>
			public const int uSignalIcon351 = 351;
			/// <summary>
			/// 绿色指示灯快速闪烁
			/// </summary>
			public const int uSignalIcon352 = 352;
			/// <summary>
			/// 长按5秒{0}(按键)
			/// </summary>
			public const int uSignalIcon353 = 353;
			/// <summary>
			///长按图示按键5秒以上，绿色快闪{0}进入配网状态，绿灯常亮则入网成功
			/// </summary>
			public const int uSignalIcon354 = 354;

			public const int AirerStop = 355;
			public const int AirerDown = 356;
			public const int AirerDry = 357;
			public const int AirerWind = 358;
			public const int AirerDisinfect = 359;
			public const int AirerLight = 360;
			public const int AirerUp = 361;
			public const int AddDoorLockCalmFingerprint = 362;
			public const int AddDoorLockFaceID = 363;
			public const int CalmFingerprintUnlock = 364;
			public const int FaceIDUnlock = 365;
			/// <summary>
			/// 请正对门锁摄像头进行
			/// </summary>
			public static readonly int EntryFaceIDTip1 = 366;
			/// <summary>
			/// 人脸扫描录入开锁方式
			/// </summary>
			public static readonly int EntryFaceIDTip2 = 367;
			/// <summary>
			/// 请正对门锁摄像头进行扫描
			/// </summary>
			public static readonly int EntryFaceIDTip3 = 368;
			/// <summary>
			/// 录入开锁方式
			/// </summary>
			public static readonly int EntryFaceIDTip4 = 369;
			/// <summary>
			/// 录入静脉指纹
			/// </summary>
			public static readonly int EntryCalmFingerprint = 370;
			/// <summary>
			/// 录入人脸识别成功
			/// </summary>
			public static readonly int EntryFaceIDSuccess = 371;
			/// <summary>
			/// 录入静脉指纹成功
			/// </summary>
			public static readonly int EntryCalmFingerprintSuccess = 372;
			/// <summary>
			/// 人脸识别
			/// </summary>
			public static readonly int FaceIDRemark = 373;
			/// <summary>
			/// 静脉纹
			/// </summary>
			public static readonly int CalmFingerprintRemark = 374;
			/// <summary>
			/// 人脸识别
			/// </summary>
			public static readonly int FaceIDMark = 375;
			/// <summary>
			/// 静脉纹
			/// </summary>
			public static readonly int CalmFingerprintMark = 376;
			/// <summary>
			/// 1.长按{0}"照明键“5秒
			/// </summary>
			public static readonly int uSignalIcon377 = 377;
			/// <summary>
			/// 2.再按{0}一下"上升键“
			/// </summary>
			public static readonly int uSignalIcon378 = 378;
			/// <summary>
			/// 遥控器正常的状态下，长按"照明键“5秒，{0}再按一下”上升键“，蜂鸣器快响3声，蓝色配网{0}指示灯快闪，进入配网模式。
			/// </summary>
			public static readonly int uSignalIcon379 = 379;
			/// <summary>
			/// 烘干时间
			/// </summary>
			public static readonly int AirerDryTime = 380;
			/// <summary>
			/// 风干时间
			/// </summary>
			public static readonly int AirerWindTime = 381;
			/// <summary>
			/// 消毒时间
			/// </summary>
			public static readonly int AirerDisinfectTime = 382;
			/// <summary>
			/// 默认
			/// </summary>
			public static readonly int AirerDefault = 383;
			/// <summary>
			/// 小时
			/// </summary>
			public static readonly int AirerHour = 384;
			/// <summary>
			/// 分钟
			/// </summary>
			public static readonly int AirerMin = 385;
			/// <summary>
			/// 晾衣
			/// </summary>
			public const int AirerFun = 386;
			/// <summary>
			/// 设置晾衣架烘干时间失败
			/// </summary>
			public const int AirerDryTimeFailed = 387;
			/// <summary>
			///设置晾衣架风干时间失败
			/// </summary>
			public const int AirerWindTimeFailed = 388;
			/// <summary>
			/// 设置晾衣架消毒时间失败
			/// </summary>
			public const int AirerDisinfectTimeFailed = 389;
			/// <summary>
			/// PM 2.5传感器
			/// </summary>
			public const int Pm2P5Sensor = 390;
			/// <summary>
			/// CO2传感器
			/// </summary>
			public const int CO2Sensor = 391;
			/// <summary>
			/// 设置LED灯
			/// </summary>
			public const int SetAirQualitySensorLight = 392;
			/// <summary>
			/// 查看历史记录
			/// </summary>
			public const int CheckAirQualitySensorHistory = 393;
			/// <summary>
			/// 设备LED灯
			/// </summary>
			public const int Pollution = 394;
			/// <summary>
			/// LED设置
			/// </summary>
			public const int LEDSet = 395;
			/// <summary>
			/// 设备LED灯
			/// </summary>
			public const int DeviceLED = 396;
			/// <summary>
			/// 设置时间
			/// </summary>
			public const int LEDSetTime = 397;
			/// <summary>
			/// 上午
			/// </summary>
			public const int Morning = 398;
			/// <summary>
			/// 下午
			/// </summary>
			public const int Afternoon = 399;
			/// <summary>
			/// 获取列表数据部分丢失，请刷新重新获取
			/// </summary>
			public const int GetLedTimeLost = 400;
			/// <summary>
			/// LED灯关闭
			/// </summary>
			public const int LedClose = 401;
			/// <summary>
			/// 请设置开始时间
			/// </summary>
			public const int StartTimeEmpty = 402;
			/// <summary>
			/// 请设置开结束时间
			/// </summary>
			public const int EndTimeEmpty = 403;
			/// <summary>
			/// 最多可设置5条失效时间段
			/// </summary>
			public const int LedBindFull = 404;
			/// <summary>
			/// 开始时间不能大于结束时间
			/// </summary>
			public const int LedBindTip1 = 405;
			/// <summary>
			/// 结束时间不能小于开始时间
			/// </summary>
			public const int LedBindTip2 = 406;
			/// <summary>
			/// 名称太长，保存失败，请重新设置
			/// </summary>
			public const int LedNameTooLong = 407;
			/// <summary>
			/// CO2来源
			/// </summary>
			public const int CO2Source = 408;

			public readonly static int cancel = 5097;
			public readonly static int confrim = 5098;
			@@ -370,7 +955,7 @@
			public readonly static int Sunrisesunset = 5134;
			public readonly static int cycle = 5135;
			public readonly static int completeNext = 5136;
			public readonly static int Selectedtimetype= 5137;
			public readonly static int Selectedtimetype = 5137;
			public readonly static int Timecondition = 5138;
			public readonly static int condition = 5139;
			public readonly static int pushset = 5140;
			@@ -428,7 +1013,7 @@
			public readonly static int addtime = 5192;
			public readonly static int selectcommontimetype = 5193;
			public readonly static int newautomation = 5194;
			public readonly static int editautomation= 5195;
			public readonly static int editautomation = 5195;
			public readonly static int open1 = 5196;
			public readonly static int disable = 5197;
			public readonly static int selectsavedautomationstate = 5198;
			@@ -564,135 +1149,199 @@
			public readonly static int logictemplate = 5358;
			public readonly static int onlight = 5359;
			public readonly static int offlight = 5360;
			public readonly static int OnOffSwitch=5361;
			public readonly static int OnOffSwitch = 5361;
			public readonly static int addlinkageevent = 5362;
			public readonly static int editlinkageevent = 5363;
			public readonly static int selectunlockingmode=5364;
			public readonly static int selectunlockingmode = 5364;
			public readonly static int lockaddaction = 5365;
			public readonly static int linkageevent = 5366;
			public readonly static int current = 5367;
			public readonly static int selecfoolr = 5368;
			public readonly static int delaytip = 5369;
			public readonly static int usertip = 5370;
			public readonly static int scenetip = 5371;
			public readonly static int securitytip = 5372;
			public readonly static int defaulttext = 5373;
			public readonly static int addsensor = 5374;
			public readonly static int addlighting = 5375;
			public readonly static int application = 5376;
			public readonly static int automationaddtext = 5377;
			public readonly static int tiptextnull = 5378;
			public readonly static int tiplocktextnull = 5379;
			public readonly static int openmode = 5380;
			public readonly static int addnull = 5381;
			public readonly static int look = 5382;
			public readonly static int closeUp = 5383;
			public readonly static int yearSone = 5384;
			public readonly static int monthSone = 5385;
			public readonly static int daySone = 5386;
			public readonly static int numberSone = 5387;
			public readonly static int openAutomationSone = 5388;
			public readonly static int timeSetSone = 5389;
			public readonly static int invalidSetting = 5390;
			public readonly static int hour = 5391;
			public readonly static int lockOpen = 5392;
			public readonly static int setDoorLockOpen = 5393;
			public readonly static int less = 5394;
			public readonly static int more = 5395;
			public readonly static int or = 5396;
			public readonly static int timeNull = 5397;
			public readonly static int numberInput = 5398;
			public readonly static int closeFailed = 5399;
			public readonly static int openFailed = 5400;
			public readonly static int addFailed = 5401;
			public readonly static int timeSensitive = 5402;
			public readonly static int executeSone = 5403;
			public readonly static int hour1 = 5404;
			public readonly static int mi = 5405;
			public readonly static int nightLightSwitch = 5406;
			public readonly static int colorTemperature = 5407;
			public readonly static int buzzer = 5408;
			public readonly static int ambientLight = 5409;
			public readonly static int illuminanceValue = 5410;
			public readonly static int dark = 5411;
			public readonly static int bright = 5412;
			public readonly static int tipIlluminanceValue = 5413;
			public readonly static int videoIntercom = 5414;
			public readonly static int dong = 5415;
			public readonly static int unit = 5416;
			public readonly static int theOutdoorUnit = 5417;
			public const int airqualitysensor = 5418;
			public const int pm25 = 5419;
			public const int sensortemperature= 5420;
			public const int sensorhumidity = 5421;
			public const int co2 = 5422;
			public const int you = 5423;
			public const int liang = 5424;
			public const int cha = 5425;
			public const int pmyou = 5426;
			public const int pmliang = 5427;
			public const int pmqingdu = 5428;
			public const int pmzhongdu = 5429;
			public const int co2qingxin = 5430;
			public const int co2huizhuo = 5431;
			public const int co2queyang = 5432;
			public const int co2yanzhongqueyang= 5433;
			public const int kongqizhiliang = 5434;


			#region 登录注册

			/// <summary>
			/// HDL Home
			/// Evoyo Home
			/// </summary>
			public const int AppName = 10000;
			/// <summary>
			/// 常用
			/// </summary>
			public const int Favorite = 10001;


			/// <summary>
			/// 手机号
			/// </summary>
			public const int PhoneNum = 10100;
			/// <summary>
			/// 邮箱
			/// </summary>
			public const int Email = 10101;
			/// <summary>
			/// 请输入手机号
			/// </summary>
			public const int PleaseInputPhoneNum = 10102;
			/// <summary>
			/// 请输入不少于6位的密码
			/// </summary>
			public const int PleaseInputPWD = 10103;
			/// <summary>
			/// 登录
			/// </summary>
			public const int Login = 10104;
			/// <summary>
			/// 验证码登录
			/// </summary>
			public const int LoginByCode = 10105;
			/// <summary>
			/// 注册用户
			/// </summary>
			public const int Register = 10106;
			/// <summary>
			/// 请输入邮箱
			/// </summary>
			public const int PleaseInputEmail = 10107;
			/// <summary>
			/// 搜索
			/// </summary>
			public const int Search = 10108;
			/// <summary>
			/// 完成
			/// </summary>
			public const int Complete = 10109;
			/// <summary>
			/// 账号登录
			/// </summary>
			public const int LoginByAccountPWD = 10110;
			/// <summary>
			/// 发送验证码
			/// </summary>
			public const int SendVerificationCode = 10111;
			/// <summary>
			/// 后重发
			/// </summary>
			public const int SendVerificationCodeAgain = 10112;
			/// <summary>
			/// 请再次输入密码
			/// </summary>
			public const int PleaseComfirePWD = 10113;
			/// <summary>
			/// 发送验证码成功，请注意查收
			/// </summary>
			public const int SendVerificationCodeSuccess = 10114;
			/// <summary>
			/// 确定
			/// </summary>
			public const int Confrim = 10115;
			/// <summary>
			/// 该账号已注册，可直接登录
			/// </summary>
			public const int AccountHasBeenRegistered = 10116;
			/// <summary>
			/// 提供的参数错误
			/// </summary>
			public const int PARAMETEROREMPTY = 10117;
			/// <summary>
			/// 两次密码不一致
			/// </summary>
			public const int TwoPasswordInconsistency = 10118;
			/// <summary>
			/// 验证码错误
			/// </summary>
			public const int VALIDCODEANDPHONENOEQUAL = 10119;
			/// <summary>
			/// 请求服务器失败
			/// </summary>
			public const int RequestServerFailed = 10120;
			/// <summary>
			/// 恭喜注册成功！
			/// </summary>
			public const int RegisterSuccessTip = 10121;
			/// <summary>
			/// 即将自动登录
			/// </summary>
			public const int WillAutoLogin = 10122;
			/// <summary>
			/// 忘记密码
			/// </summary>
			public const int ForgotPWD = 10123;
			/// <summary>
			/// 确认重置
			/// </summary>
			public const int ComfirmReset = 10124;
			/// <summary>
			/// 修改成功
			/// </summary>
			public const int ResetSuccess = 10125;
			/// <summary>
			/// 你的密码修改成功，请重新登录
			/// </summary>
			public const int ResetScucessPleaseLogin = 10126;
			/// <summary>
			/// 手机号
			/// </summary>
			public const int PhoneNum = 10100;
			/// <summary>
			/// 邮箱
			/// </summary>
			public const int Email = 10101;
			/// <summary>
			/// 请输入手机号
			/// </summary>
			public const int PleaseInputPhoneNum = 10102;
			/// <summary>
			/// 请输入不少于6位的密码
			/// </summary>
			public const int PleaseInputPWD = 10103;
			/// <summary>
			/// 登录
			/// </summary>
			public const int Login = 10104;
			/// <summary>
			/// 验证码登录
			/// </summary>
			public const int LoginByCode = 10105;
			/// <summary>
			/// 注册用户
			/// </summary>
			public const int Register = 10106;
			/// <summary>
			/// 请输入邮箱
			/// </summary>
			public const int PleaseInputEmail = 10107;
			/// <summary>
			/// 搜索
			/// </summary>
			public const int Search = 10108;
			/// <summary>
			/// 完成
			/// </summary>
			public const int Complete = 10109;
			/// <summary>
			/// 账号登录
			/// </summary>
			public const int LoginByAccountPWD = 10110;
			/// <summary>
			/// 获取验证码
			/// </summary>
			public const int SendVerificationCode = 10111;
			/// <summary>
			/// 后重发
			/// </summary>
			public const int SendVerificationCodeAgain = 10112;
			/// <summary>
			/// 请再次输入密码
			/// </summary>
			public const int PleaseComfirePWD = 10113;
			/// <summary>
			/// 发送验证码成功，请注意查收
			/// </summary>
			public const int SendVerificationCodeSuccess = 10114;
			/// <summary>
			/// 确定
			/// </summary>
			public const int Confrim = 10115;
			/// <summary>
			/// 该用户已存在，可直接登录
			/// </summary>
			public const int AccountHasBeenRegistered = 10116;
			/// <summary>
			/// 提供的参数错误
			/// </summary>
			public const int PARAMETEROREMPTY = 10117;
			/// <summary>
			/// 确认密码不一致，请重新输入
			/// </summary>
			public const int TwoPasswordInconsistency = 10118;
			/// <summary>
			/// 验证码错误，请重新输入
			/// </summary>
			public const int VALIDCODEANDPHONENOEQUAL = 10119;
			/// <summary>
			/// 请求服务器失败
			/// </summary>
			public const int RequestServerFailed = 10120;
			/// <summary>
			/// 恭喜注册成功！
			/// </summary>
			public const int RegisterSuccessTip = 10121;
			/// <summary>
			/// 即将自动登录
			/// </summary>
			public const int WillAutoLogin = 10122;
			/// <summary>
			/// 忘记密码
			/// </summary>
			public const int ForgotPWD = 10123;
			/// <summary>
			/// 确认重置
			/// </summary>
			public const int ComfirmReset = 10124;
			/// <summary>
			/// 修改成功
			/// </summary>
			public const int ResetSuccess = 10125;
			/// <summary>
			/// 你的密码修改成功，请重新登录
			/// </summary>
			public const int ResetScucessPleaseLogin = 10126;
			/// <summary>
			/// 请选择区号
			/// </summary>
			@@ -714,7 +1363,7 @@
			/// </summary>
			public const int USERNAMEORPWDERROR = 10131;
			/// <summary>
			/// 账号不存在，请先注册
			/// 账号不存在，请注册用户
			/// </summary>
			public const int ACCOUNTNOEXISTS = 10132;
			/// <summary>
			@@ -722,258 +1371,343 @@
			/// </summary>
			public const int PleaseInputVerificationCode = 10133;
			/// <summary>
			/// 即将通过微信授权登录
			/// 登录中...
			/// </summary>
			public const int LoginByWechat = 10134;


			#endregion

			#region 分类

			/// <summary>
			/// 功能
			public const int Logining = 10135;
			/// <summary>
			/// 当前住宅为空，请先建立住宅
			/// </summary>
			public const int CurrentlyTheUserIshHouseIsEmptyPleaseBuildANewHouseFirst = 10136;
			/// <summary>
			/// 邮箱错误，请重新输入
			/// </summary>
			public const int TheEmailError = 10138;
			/// <summary>
			/// 手机号错误，请重新输入
			/// </summary>
			public const int ThePhoneError = 10139;
			/// <summary>
			/// 请输入长度为6-13个字符的密码
			/// </summary>
			public const int ThePWDLengthError = 10140;
			/// <summary>
			/// 新密码和原密码一致
			/// </summary>
			public const int NEWPASSWORDANDOLDPASSWORDEQUAL = 10142;
			/// <summary>
			/// 请先获取验证码
			/// </summary>
			public const int NORECORD = 10143;
			/// <summary>
			/// 忘记密码？
			/// </summary>
			public const int ForgotPWD_1 = 10144;
			/// <summary>
			/// 已有账号？登录
			/// </summary>
			public const int Function = 11000;
			/// <summary>
			/// 场景
			/// </summary>
			public const int Scence = 11001;
			/// <summary>
			/// 自动化
			/// </summary>
			public const int Automation = 11002;


			/// <summary>
			/// 没有功能请在个人中心中--设备管理处添加
			/// </summary>
			public const int NoFunction = 11010;
			/// <summary>
			/// 编辑
			/// </summary>
			public const int Edit = 11011;
			/// <summary>
			/// 设置功能
			/// </summary>
			public const int FunctionSetting = 11012;
			/// <summary>
			/// 信息编辑
			/// </summary>
			public const int EditInfo = 11013;
			/// <summary>
			/// 功能名称
			/// </summary>
			public const int FunctionName = 11014;
			/// <summary>
			/// 所属区域
			/// </summary>
			public const int BelongZone = 11015;
			/// <summary>
			/// 所属模块
			/// </summary>
			public const int BelongModel = 11016;
			/// <summary>
			/// 未知
			/// </summary>
			public const int UNKnown = 11017;
			/// <summary>
			/// 分享
			/// </summary>
			public const int Share = 11018;
			/// <summary>
			/// 分享的
			/// </summary>
			public const int Shared = 11019;
			/// <summary>
			/// 选择图标
			/// </summary>
			public const int SelectIcon = 11020;
			/// <summary>
			/// 保存
			/// </summary>
			public const int Save = 11021;
			/// <summary>
			/// 提示
			/// </summary>
			public const int TIP = 11022;
			/// <summary>
			/// 取消
			/// </summary>
			public const int Cancel = 11023;
			/// <summary>
			/// 没有场景 {\r\n} 请点击右上角添加
			/// </summary>
			public const int NoScene = 11024;
			/// <summary>
			/// 设置
			/// </summary>
			public const int Setting = 11025;
			/// <summary>
			/// 延时
			/// </summary>
			public const int Delay = 11026;
			/// <summary>
			/// 确定删除吗？
			/// </summary>
			public const int ConfirmDelete = 11027;
			/// <summary>
			/// 添加场景
			/// </summary>
			public const int AddScence = 11028;
			/// <summary>
			/// 场景名称
			/// </summary>
			public const int SceneName = 11029;
			/// <summary>
			/// 请输入场景名称
			/// </summary>
			public const int PleaseInputSceneName = 11030;
			/// <summary>
			/// 添加执行目标
			/// </summary>
			public const int AddScentTargetAction = 11031;
			/// <summary>
			/// 选择区域
			/// </summary>
			public const int SelectZone = 11032;
			/// <summary>
			/// 选择场景图片
			/// </summary>
			public const int SelectScenePic = 11033;

			#region 设备类型
			public const int LoginByAccountPWD_1 = 10145;
			/// <summary>
			/// 该房间名称已存在
			/// </summary>
			public const int HadSameRoom = 10150;
			/// <summary>
			/// 场景名不能为空
			/// </summary>
			public const int SceneNameCannotBeNull = 10151;
			/// <summary>
			/// 控制场景失败
			/// </summary>
			public const int ControlSceneFail = 10152;
			/// <summary>
			/// 操作失败
			/// </summary>
			public const int FAIL = 10155;
			/// <summary>
			/// 发送验证码失败
			/// </summary>
			public const int SENDFAIL = 10156;
			/// <summary>
			/// 已是最新版本
			/// </summary>
			public const int TheAppVersionIsNewest = 10160;
			/// <summary>
			/// 更新最新版
			/// </summary>
			public const int Update = 10161;
			/// <summary>
			/// 更新失败
			/// </summary>
			public const int UpdateAppFail = 10163;
			/// <summary>
			/// 正在更新中...
			/// </summary>
			public const int Updating = 10164;
			/// <summary>
			/// 版本号
			/// </summary>
			public const int VersionCode = 10166;
			/// <summary>
			/// 服务协议
			/// </summary>
			public const int SLA = 10167;
			/// <summary>
			/// 版本更新
			/// </summary>
			public const int UpdateVersion = 10168;
			/// <summary>
			/// 功能
			/// </summary>
			public const int Function = 11000;
			/// <summary>
			/// 场景
			/// </summary>
			public const int Scence = 11001;
			/// <summary>
			/// 自动化
			/// </summary>
			public const int Automation = 11002;
			/// <summary>
			/// 没有功能请在个人中心--设备管理处添加
			/// </summary>
			public const int NoFunction = 11010;
			/// <summary>
			/// 编辑
			/// </summary>
			public const int Edit = 11011;
			/// <summary>
			/// 功能设置
			/// </summary>
			public const int FunctionSetting = 11012;
			/// <summary>
			/// 信息编辑
			/// </summary>
			public const int EditInfo = 11013;
			/// <summary>
			/// 功能名称
			/// </summary>
			public const int FunctionName = 11014;
			/// <summary>
			/// 所属区域
			/// </summary>
			public const int BelongZone = 11015;
			/// <summary>
			/// 所属设备
			/// </summary>
			public const int BelongDevice = 11016;
			/// <summary>
			/// 未知
			/// </summary>
			public const int UNKnown = 11017;
			/// <summary>
			/// 分享
			/// </summary>
			public const int Share = 11018;
			/// <summary>
			/// 分享的
			/// </summary>
			public const int Shared = 11019;
			/// <summary>
			/// 选择图标
			/// </summary>
			public const int SelectIcon = 11020;
			/// <summary>
			/// 保存
			/// </summary>
			public const int Save = 11021;
			/// <summary>
			/// 提醒
			/// </summary>
			public const int TIP = 11022;
			/// <summary>
			/// 取消
			/// </summary>
			public const int Cancel = 11023;
			/// <summary>
			/// 没有场景{0}请点击右上角添加
			/// </summary>
			public const int NoScene = 11024;
			/// <summary>
			/// 设置
			/// </summary>
			public const int Setting = 11025;
			/// <summary>
			/// 延时
			/// </summary>
			public const int Delay = 11026;
			/// <summary>
			/// 确定删除吗？
			/// </summary>
			public const int ConfirmDelete = 11027;
			/// <summary>
			/// 添加场景
			/// </summary>
			public const int AddScence = 11028;
			/// <summary>
			/// 场景名称
			/// </summary>
			public const int SceneName = 11029;
			/// <summary>
			/// 请输入场景名称
			/// </summary>
			public const int PleaseInputSceneName = 11030;
			/// <summary>
			/// 添加执行目标
			/// </summary>
			public const int AddScentTargetAction = 11031;
			/// <summary>
			/// 选择区域
			/// </summary>
			public const int SelectZone = 11032;
			/// <summary>
			/// 选择场景图片
			/// </summary>
			public const int SelectScenePic = 11033;
			/// <summary>
			/// 确定要移除该功能？
			/// </summary>
			public const int DeleteFunction = 11034;
			/// <summary>
			/// 添加功能
			/// </summary>
			public const int AddFunction = 11035;
			/// <summary>
			/// 添加延时
			/// </summary>
			public const int AddDelayTime = 11036;
			/// <summary>
			/// 空调模式为空，请先配置
			/// </summary>
			public const int AC_Model_None = 11037;
			/// <summary>
			/// 未知设备
			/// </summary>
			public const int UnknowDevice = 12100;
			/// <summary>
			/// 继电器
			/// 温度传感器
			/// </summary>
			public const int OnOffOutput = 12102;
			public const int TemperatureSensor = 12110;
			/// <summary>
			/// 调光灯
			/// 湿度传感器
			/// </summary>
			public const int DimmableLight = 12103;
			public const int HumiditySensor = 12111;
			/// <summary>
			/// 窗帘
			/// 有人
			/// </summary>
			public const int WindowCoveringDevice = 12104;
			public const int IASZone_Statu_HavePerson = 12500;
			/// <summary>
			/// 空调
			/// 无人
			/// </summary>
			public const int Thermostat = 12105;
			public const int IASZone_Statu_NoPerson = 12501;
			/// <summary>
			/// 传感器
			/// 漏水
			/// </summary>
			public const int IASZone = 12106;
			public const int IASZone_Statu_HaveWater = 12502;
			/// <summary>
			/// 空气开关
			/// 正常
			/// </summary>
			public const int AirSwitch = 12107;
			public const int IASZone_Statu_Normal = 12503;
			/// <summary>
			/// 彩灯
			/// 开启
			/// </summary>
			public const int ColorDimmableLight = 12108;
			public const int IASZone_Statu_Open = 12504;
			/// <summary>
			/// 中继器
			/// 闭合
			/// </summary>
			public const int Repeater = 12109;

			#endregion


			#endregion

			#region 主页

			public const int IASZone_Statu_Close = 12505;
			/// <summary>
			/// 报警
			/// </summary>
			public const int IASZone_Statu_Alarm = 12506;
			/// <summary>
			/// 安全
			/// </summary>
			public const int IASZone_Statu_Safe = 12507;
			/// <summary>
			/// 房间列表
			/// </summary>
			public const int RoomList = 13100;

			/// <summary>
			/// 选择楼层
			/// </summary>
			public const int SelectFloor = 13101;
			/// <summary>
			/// 选择住宅
			/// </summary>
			public const int ChangeHome = 13102;
			/// <summary>
			/// 新用户登录，请先绑定网关
			/// </summary>
			public const int NewAccountNeedBingGW = 13103;
			/// <summary>
			/// 添加智能网关
			/// </summary>
			public const int AddSmartGW = 13104;
			/// <summary>
			/// 编辑房间
			/// </summary>
			public const int EditRoom = 13105;
			/// <summary>
			/// 房间名称
			/// </summary>
			public const int RoomName = 13106;
			/// <summary>
			/// 所属楼层
			/// </summary>
			public const int BelongFloor = 13107;
			/// <summary>
			/// 温度
			/// </summary>
			public const int Temperature = 13108;
			/// <summary>
			/// 湿度
			/// </summary>
			public const int Humidity = 13109;
			/// <summary>
			/// 当前
			/// </summary>
			public const int Current = 13110;
			/// <summary>
			/// 开
			/// </summary>
			public const int Open = 13111;
			/// <summary>
			/// 关闭
			/// </summary>
			public const int Close = 13112;
			/// <summary>
			/// 不开启
			/// </summary>
			public const int NotOpen = 13113;
			/// <summary>
			/// 秒
			/// </summary>
			public const int Second = 13114;
			/// <summary>
			/// 分钟
			/// </summary>
			public const int Minute = 13115;
			/// <summary>
			/// 小时
			/// </summary>
			public const int Hour = 13116;
			/// <summary>
			/// 未分配
			/// </summary>
			public const int Unallocated = 13117;
			/// <summary>
			/// 全选
			/// </summary>
			public const int AllSelect = 13118;
			/// <summary>
			/// 添加到
			/// </summary>
			public const int AddTo = 13119;
			/// <summary>
			/// 选择楼层
			/// </summary>
			public const int SelectFloor = 13101;
			/// <summary>
			/// 选择住宅
			/// </summary>
			public const int ChangeHome = 13102;
			/// <summary>
			/// 新用户登录，请先绑定网关
			/// </summary>
			public const int NewAccountNeedBingGW = 13103;
			/// <summary>
			/// 添加智能网关
			/// </summary>
			public const int AddSmartGW = 13104;
			/// <summary>
			/// 编辑房间
			/// </summary>
			public const int EditRoom = 13105;
			/// <summary>
			/// 房间名称
			/// </summary>
			public const int RoomName = 13106;
			/// <summary>
			/// 所属楼层
			/// </summary>
			public const int BelongFloor = 13107;
			/// <summary>
			/// 温度
			/// </summary>
			public const int Temperature = 13108;
			/// <summary>
			/// 湿度
			/// </summary>
			public const int Humidity = 13109;
			/// <summary>
			/// 当前
			/// </summary>
			public const int Current = 13110;
			/// <summary>
			/// 开
			/// </summary>
			public const int Open = 13111;
			/// <summary>
			/// 关闭
			/// </summary>
			public const int Close = 13112;
			/// <summary>
			/// 不开启
			/// </summary>
			public const int NotOpen = 13113;
			/// <summary>
			/// 秒
			/// </summary>
			public const int Second = 13114;
			/// <summary>
			/// 分钟
			/// </summary>
			public const int Minute = 13115;
			/// <summary>
			/// 小时
			/// </summary>
			public const int Hour = 13116;
			/// <summary>
			/// 未分配
			/// </summary>
			public const int Unallocated = 13117;
			/// <summary>
			/// 全选
			/// </summary>
			public const int AllSelect = 13118;
			/// <summary>
			/// 添加到
			/// </summary>
			public const int AddTo = 13119;
			/// <summary>
			/// 该房间是分享过来的，不允许进行该操作
			/// </summary>
			public const int TheRoomIsSharedNotAllowedToOperate = 13120;
			/// <summary>
			/// 还没选择房间，请先选择
			/// 还没选择区域，请先选择
			/// </summary>
			public const int NotSelectZone = 13121;
			/// <summary>
			@@ -1084,11 +1818,14 @@
			/// 我的相册
			/// </summary>
			public const int MyAblums = 13148;

			/// <summary>
			/// 该场景正在延时，请稍后
			/// </summary>
			public const int TheSceneIsDelaying = 13149;
			/// <summary>
			/// 选择摆风
			/// </summary>
			public const int SelectSwing=13500;
			public const int SelectSwing = 13500;
			/// <summary>
			/// 自动
			/// </summary>
			@@ -1113,312 +1850,545 @@
			/// 5挡
			/// </summary>
			public const int Swing_Fifth = 13506;
			/// <summary>
			/// 请清洁滤网
			/// </summary>
			public const int NeedCleanAC = 13511;


			#endregion







			public static readonly int OK = 10005;

			public static readonly int AccountOrPasswordCanNotBeEmpty = 10006;

			public static readonly int IncorrectMailboxformat = 10008;
			public static readonly int PasswordLengthIsLessThanSix = 10009;


			public static readonly int ThePasswordIsEmpty = 10011;
			public static readonly int PleaseGoToTheMailboxToActivateTheAccountNumber = 10012;
			public static readonly int PleaseInputTheCorrectCellPhoneNumber = 10013;
			public static readonly int PleaseInputTheCorrectVerificationCode = 10014;


			public static readonly int ThePhoneNumberIsNotRegisteredYetPleaseRegisterFirst = 10017;
			public static readonly int LoginCodeError = 10018;
			public static readonly int ThisUserBelongsToDebugAccountAndIsNotEnabled = 10019;
			public static readonly int PleaseGoToTheMailboxToConfirmThePasswordChange = 10020;

			public static readonly int MailDeliveryFailedPleaseTryAgain = 10021;
			public static readonly int TheAccountIsNotAuthorized = 10022;
			public static readonly int Version = 10023;
			public static readonly int QuitAccount = 10024;
			public static readonly int InputNewPWD = 10025;
			public static readonly int CurrentlyTheUserIshHouseIsEmptyPleaseBuildANewHouseFirst = 10026;
			public static readonly int ResidentialNameCannotBeEmpty = 10027;
			public static readonly int TheResidenceNameHasExist = 10028;
			public static readonly int DelResidence = 10029;
			public static readonly int PWDCannotBeNull = 10030;

			public static readonly int AddRoomBackgroundPicture = 10031;
			public static readonly int TheRoomNameCannotBeNUll = 10032;
			public static readonly int TheResidenceNameNull = 10033;



			public static readonly int PleaseInputPhoneNumberOrEmail = 11000;

			//*****public static readonly int ForgotPassword = 11002;


			public static readonly int Account = 11005;
			public static readonly int RegisterByPhone = 11006;
			public static readonly int RegisterByEmail = 11007;
			public static readonly int LoginHadAccountPWD = 11008;






			public static readonly int BackToLogin = 11015;

			public static readonly int FindPWDByPhone = 11017;
			public static readonly int FindPWDByEmail = 11018;
			public static readonly int PleaseInputThePhoneAndYouWillHaveVerificationCode = 11019;
			public static readonly int PleaseInputTheEmailAndYouWillHaveVerificatoinCode = 11020;
			public static readonly int ResetPWD = 11021;
			public static readonly int ResetPWDSuccessPleaseLoginAgain = 11022;

			public static readonly int Logining = 11024;

			public static readonly int AddRoom = 11026;



			public static readonly int SettingContent = 11031;
			public static readonly int PleaseInputRoomName = 11032;
			public static readonly int LocalPic = 11033;
			public static readonly int TakePhoto = 11034;
			public static readonly int SystemPic = 11035;

			public static readonly int HadSameRoom = 11037;
			//*****public static readonly int Function = 11038;



			public static readonly int AddFunction = 11042;

			public static readonly int Light = 11044;
			public static readonly int AddLight = 11045;
			public static readonly int DropLight = 11046;
			public static readonly int DownLight = 11047;
			public static readonly int SpotLight = 11048;
			public static readonly int DeviceName = 11049;


			public static readonly int ConfirmAdd = 11052;

			public static readonly int Add = 11054;
			public static readonly int DeviceSetting = 11055;

			public static readonly int AddDeviceSuccess = 11058;

			public static readonly int Device = 11060;

			public static readonly int ConfirmDeleteThisRoom = 11062;








			public static readonly int NextStep = 11071;
			public static readonly int SelectRoom = 11072;
			public static readonly int SelectDevice = 11073;

			/// <summary>
			/// 调光
			/// </summary>
			public static readonly int Dimming = 11075;
			public static readonly int ThisSceneHadTheDevice = 11076;
			public static readonly int SceneNameCannotBeNull = 11077;
			public static readonly int ModifyScene = 11078;





			public static readonly int YourPWDIsTooSample = 11088;
			public static readonly int PleaseInputTheCorrectEmail = 11089;
			/// <summary>
			/// 操作失败
			/// </summary>
			public static readonly int FAIL = 11090;
			/// <summary>
			/// 发送验证码失败
			/// </summary>
			public static readonly int SENDFAIL = 11091;
			/// <summary>
			/// 连接网关或者获取数据失败
			/// </summary>
			public static readonly int ConnectGWFail = 11092;
			/// <summary>
			/// 时间间隔
			/// </summary>
			public static readonly int TimeSpan = 11093;




			/// <summary>
			/// 还没有功能哦
			/// </summary>
			public const int NoFunction_Tip = 13600;
			/// <summary>
			/// 还没有场景哦
			/// </summary>
			public const int NoScene_Tip = 13601;
			/// <summary>
			/// 无
			/// </summary>
			public const int No = 13602;
			/// <summary>
			/// 获取中...
			/// </summary>
			public const int Getting = 13603;
			/// <summary>
			/// 当前亮度
			/// </summary>
			public const int CurrentLightLevel = 13604;
			/// <summary>
			/// 模板
			/// </summary>
			public const int Templation = 13605;
			/// <summary>
			/// 读取中
			/// </summary>
			public const int Reading = 13606;
			/// <summary>
			/// 添加住宅
			/// </summary>
			public const int AddResidence = 13607;
			/// <summary>
			/// 新建住宅
			/// </summary>
			public const int CreatNewResidence = 13608;
			/// <summary>
			/// 自定义
			/// </summary>
			public static readonly int Custom = 11098;

			/// <summary>
			/// 取消收藏
			/// </summary>
			public static readonly int CancelCollect = 11101;
			/// <summary>
			/// 修改信息
			/// </summary>
			public static readonly int ChangeDeviceInfo = 11102;
			/// <summary>
			/// 百分比
			/// </summary>
			public static readonly int Percent = 11103;
			public const int Customize = 13609;
			/// <summary>
			/// 项目名
			/// </summary>
			public const int ProgramName = 13610;
			/// <summary>
			/// 请填写项目名称
			/// </summary>
			public const int PleaseInputProgramName = 13611;
			/// <summary>
			/// 楼
			/// </summary>
			public const int FloorNo = 13612;
			/// <summary>
			/// 1-100之间
			/// </summary>
			public const int BetweenOneAndHundred = 13613;
			/// <summary>
			/// 单元
			/// </summary>
			public const int UnitNo = 13614;
			/// <summary>
			/// 户
			/// </summary>
			public const int HouseholdsNo = 13615;
			/// <summary>
			/// 层号加房号，例如0201
			/// </summary>
			public const int HouseholdsNoTip = 13616;
			/// <summary>
			/// 举例：成都金堂金茂府项目-2栋-3单元-0201户
			/// </summary>
			public const int HouseholdsNoExample = 13617;
			/// <summary>
			/// 选择创建方式
			/// </summary>
			public const int SelectCreatMode = 13618;
			/// <summary>
			/// 方式
			/// </summary>
			public const int Way = 13619;
			/// <summary>
			/// 有模板
			/// </summary>
			public const int HadTemplate = 13620;
			/// <summary>
			/// 无模板
			/// </summary>
			public const int NotHadTemplate = 13621;
			/// <summary>
			/// 无设备创建
			/// </summary>
			public const int NotHadDeviceToCreat = 13622;
			/// <summary>
			/// 有设备创建
			/// </summary>
			public const int HadDeviceToCreat = 13623;
			/// <summary>
			/// 自定义新建住宅
			/// </summary>
			public const int CustomCreatNewResidence = 13624;
			/// <summary>
			/// 自定义名称
			/// </summary>
			public const int CustomName = 13625;
			/// <summary>
			/// 自定义内容
			/// </summary>
			public const int CustomContent = 13626;
			/// <summary>
			/// 住宅配置
			/// </summary>
			public const int ResidenceSettion = 13627;
			/// <summary>
			/// 无模板有设备
			/// </summary>
			public const int NotTemplateAndHadDevice = 13628;
			/// <summary>
			/// 有模板有设备
			/// </summary>
			public const int HadTemplateAndHadDevice = 13629;
			/// <summary>
			/// 无模板无设备
			/// </summary>
			public const int NotTemplateAndNotDevice = 13630;
			/// <summary>
			/// 区域
			/// </summary>
			public const int Area = 13631;
			/// <summary>
			/// 设备和功能
			/// </summary>
			public const int DeviceAndFunction = 13632;
			/// <summary>
			/// 楼层数
			/// </summary>
			public const int FloorCount = 13633;
			/// <summary>
			/// 房间数
			/// </summary>
			public const int RoomCount = 13634;
			/// <summary>
			/// 设备数
			/// </summary>
			public const int DeviceCount = 13635;
			/// <summary>
			/// 功能数
			/// </summary>
			public const int FunctionCount = 13636;
			/// <summary>
			/// 无屏网关
			/// </summary>
			public const int NotScreanGateway = 13637;
			/// <summary>
			/// 路由网关
			/// </summary>
			public const int RouterGateway = 13638;
			/// <summary>
			/// 有网线添加网关
			/// </summary>
			public const int AddGatewayByNetworkCable = 13639;
			/// <summary>
			/// WIFI添加网关
			/// </summary>
			public const int AddGatewayByWifi = 13640;
			/// <summary>
			/// 设备列表
			/// </summary>
			public const int DeviceList = 13641;
			/// <summary>
			/// 已搜索设备数：
			/// </summary>
			public const int HadScanDeviceCount = 13642;
			/// <summary>
			/// 个
			/// </summary>
			public const int An = 13643;
			/// <summary>
			/// 取消搜索
			/// </summary>
			public const int CancelSearch = 13644;
			/// <summary>
			/// 信号
			/// </summary>
			public const int Signal = 13645;
			/// <summary>
			/// 解绑
			/// </summary>
			public const int UnBind = 13646;
			/// <summary>
			/// 设备出厂名称
			/// </summary>
			public const int FactoryNameOfEquipmen = 13647;
			/// <summary>
			/// 设备备注名称
			/// </summary>
			public const int DeviceNoteName = 13648;
			/// <summary>
			/// 点击编辑楼层与备注
			/// </summary>
			public const int ClickAndEditorRoomAndNote = 13649;
			/// <summary>
			/// 网关选择
			/// </summary>
			public const int GatewaySelect = 13650;
			/// <summary>
			/// 场景列表
			/// </summary>
			public const int SceneList = 13651;
			/// <summary>
			/// 暂无场景,请添加
			/// </summary>
			public const int NotScenePleaseAdd = 13652;
			/// <summary>
			/// 虚拟
			/// </summary>
			public const int Virtual = 13653;
			/// <summary>
			/// 本地
			/// </summary>
			public const int Local = 13654;
			/// <summary>
			/// 远程
			/// </summary>
			public const int Remote = 13655;
			/// <summary>
			/// 住宅列表
			/// </summary>
			public const int ResidenceList = 13656;
			/// <summary>
			/// 搜索住宅关键词
			/// </summary>
			public const int SearchResidenceKeyWorld = 13657;
			/// <summary>
			/// 户名
			/// </summary>
			public const int ResidenceName2 = 13658;
			/// <summary>
			/// 修改时间
			/// </summary>
			public const int EditorTime = 13659;
			/// <summary>
			/// 确认切换
			/// </summary>
			public const int ConfirmSwitch = 13660;
			/// <summary>
			/// 请输入自定义名称
			/// </summary>
			public const int PleaseInputCustomName = 13661;
			/// <summary>
			/// 请输自定义内容
			/// </summary>
			public const int PleaseInputCustomContent = 13662;
			/// <summary>
			/// 默认
			/// </summary>
			public const int Default = 13663;
			/// <summary>
			/// 由近到远
			/// </summary>
			public const int FromNearToFar = 13664;
			/// <summary>
			/// 由远到近
			/// </summary>
			public const int FromFarToNear = 13665;
			/// <summary>
			/// 返回{0}主页
			/// </summary>
			public const int GobackToHomePage2 = 13666;
			/// <summary>
			/// 保存模板{0}到APP
			/// </summary>
			public const int SaveTemplateDataToApp2 = 13667;
			/// <summary>
			/// 保存备份{0}到APP
			/// </summary>
			public const int SaveBackDataToApp2 = 13668;
			/// <summary>
			/// 本地备份保存成功
			/// </summary>
			public const int SaveLocalBackDataSuccess = 13669;
			/// <summary>
			/// 备份数据已经存在,是否覆盖?
			/// </summary>
			public const int BackUpDataIsEsixtAndPickUp = 13670;
			/// <summary>
			/// 检测不到可供选择的模板数据
			/// </summary>
			public const int NotHadTemplateDataToSelect = 13671;
			/// <summary>
			/// 选择模板
			/// </summary>
			public const int SelectTemplate = 13672;
			/// <summary>
			/// 已选模版
			/// </summary>
			public const int HadSelectTemplate = 13673;
			/// <summary>
			/// 请选择模板对象
			/// </summary>
			public const int PleaseSelectTemplate = 13674;
			/// <summary>
			/// {0}还没有选择模板对象,确认要返回?
			/// </summary>
			public const int HadNotSelectTemplateAndGoBack = 13675;
			/// <summary>
			/// 模板中对应的网关
			/// </summary>
			public const int CorrespondingGatewayInTemplate = 13676;
			/// <summary>
			/// 取消绑定
			/// </summary>
			public const int CancelBinded = 13677;
			/// <summary>
			/// 模板中对应的网关还没设置{0}确认要返回？
			/// </summary>
			public const int HadNotSelectTemplateAndGoBack2 = 13678;
			/// <summary>
			/// 模板中设备数：
			/// </summary>
			public const int DeviceCountInTemplate = 13679;
			/// <summary>
			/// 请选择模板中的设备
			/// </summary>
			public const int PleaseSelectTemplateDevice = 13680;
			/// <summary>
			/// 模板中对应的设备
			/// </summary>
			public const int CorrespondingDeviceInTemplate = 13681;
			/// <summary>
			/// 模板
			/// </summary>
			public const int Template = 13683;
			/// <summary>
			/// 确认删除「{0}」设备及功能？
			/// </summary>
			public const int DeleteDeviceMsg2 = 13684;
			/// <summary>
			/// 模版设备数与绑定设备数不一致{0}请检查设备
			/// </summary>
			public const int TemplateCountAndDeviceCountIsNotEqualMsg = 13685;
			/// <summary>
			/// 导入功能与场景
			/// </summary>
			public const int ImportFunctionAndScene = 13686;
			/// <summary>
			/// 有设备未选择模板
			/// </summary>
			public const int IsExsitNotSelectTemplateDevice = 13687;
			/// <summary>
			/// 手机传网关
			/// </summary>
			public const int PhoneSendToGateway = 13688;
			/// <summary>
			/// 网关传设备
			/// </summary>
			public const int GatewaySendToDevice = 13689;
			/// <summary>
			/// 预计总耗时
			/// </summary>
			public const int EstimatedTotalTime = 13690;
			/// <summary>
			/// 一键导入
			/// </summary>
			public const int OneClickImport = 13691;
			/// <summary>
			/// 模板丢失,请点击上方菜单,重新设置
			/// </summary>
			public const int TemplateDataIsLostPleaseReSetMsg = 13692;
			/// <summary>
			/// 请先选择网关的模板对象
			/// </summary>
			public const int PleaseSelectgatewayTemplateBefore = 13693;
			/// <summary>
			/// 设备与模板已经完全匹配
			/// </summary>
			public const int DeviceAndTemplateAlreadyMatchExactly = 13694;
			/// <summary>
			/// 本地备份
			/// </summary>
			public const int LocalBackup = 13695;
			/// <summary>
			/// 云端备份
			/// </summary>
			public const int CloudBackup = 13696;
			/// <summary>
			/// 恢复到{0}本地
			/// </summary>
			public const int RecoverToLocation = 13697;
			/// <summary>
			/// 上传到{0}云端
			/// </summary>
			public const int UplaodToCloud = 13698;
			/// <summary>
			/// 下载到APP
			/// </summary>
			public const int DownLoadToApp = 13699;
			/// <summary>
			/// 确定下载此备份到APP?
			/// </summary>
			public const int ComfirmDownLoadThisBackupToApp = 13700;
			/// <summary>
			/// 请点击上方菜单,重新设置项目类型
			/// </summary>
			public const int PleaseClickTopMenuAndResetProgramType = 13701;
			/// <summary>
			/// 确定上传指定备份到云端?
			/// </summary>
			public const int ComfirmUploadBackupToCloud = 13702;
			/// <summary>
			/// 备份数据下载成功
			/// </summary>
			public const int DownLoadBackuoSuccess = 13703;
			/// <summary>
			/// 确定将数据恢复到本地？
			/// </summary>
			public const int ComfirmRecoverBackupToLocation = 13704;
			/// <summary>
			/// 移交给{0}用户
			/// </summary>
			public const int HandoverToUser = 13705;
			/// <summary>
			/// 授权给{0}调试人员
			/// </summary>
			public const int AuthorizedToCommissioningPersonnel = 13706;
			/// <summary>
			/// 配置{0}住宅
			/// </summary>
			public const int AllocationOfHousing = 13707;
			/// <summary>
			/// 切换{0}住宅
			/// </summary>
			public const int SwitchResidence2 = 13708;
			/// <summary>
			/// 本地模板
			/// </summary>
			public const int LocalTemplate = 13709;
			/// <summary>
			/// 云端模板
			/// </summary>
			public const int CloudTemplate = 13710;
			/// <summary>
			/// 本地还没有模板
			/// </summary>
			public const int NotHadTemplateInLocal = 13711;
			/// <summary>
			/// 模板导入成功
			/// </summary>
			public const int ImportTemplateSuccess = 13712;
			/// <summary>
			/// 功能场景已全部导入
			/// </summary>
			public const int AllFUnctionAndSceneHadImported = 13713;
			/// <summary>
			/// 模板导入失败
			/// </summary>
			public const int ImportTemplateFail = 13714;
			/// <summary>
			/// 查看原因
			/// </summary>
			public const int ViewReason = 13715;
			/// <summary>
			/// 导出文本{0}说明
			/// </summary>
			public const int ExportTextExplain = 13716;
			/// <summary>
			/// 还没有创建区域
			/// </summary>
			public const int DoNotHadAddedRoom = 13717;
			/// <summary>
			/// 云端还没有模板
			/// </summary>
			public const int NotHadTemplateInDb = 13718;
			/// <summary>
			/// 下载成功
			/// </summary>
			public const int DownLoadSuccess = 13719;
			/// <summary>
			/// 下载失败
			/// </summary>
			public const int DownLoadFail = 13720;
			/// <summary>
			/// 保存到云端
			/// </summary>
			public const int SaveToColund = 13721;
			/// <summary>
			/// 请输入模板名字
			/// </summary>
			public const int PleaseInputTemplateName = 13722;
			/// <summary>
			/// 模板名字已经存在
			/// </summary>
			public const int TheTemplateNameIsEsixt = 13723;
			/// <summary>
			/// 上传模板成功
			/// </summary>
			public const int UploadTemplateSuccess = 13724;
			/// <summary>
			/// 上传模板失败
			/// </summary>
			public const int UploadTemplateFail = 13725;
			/// <summary>
			/// 此账号无权登录
			/// </summary>
			public const int ThisAccountHasNoAuthorityToLogin = 13726;
			/// <summary>
			/// 下载模板失败
			/// </summary>
			public const int DownloadTemplateFail = 13727;
			/// <summary>
			/// 编辑住宅名称失败
			/// </summary>
			public const int uEditorResidenceNameFail = 13728;
			/// <summary>
			/// 编辑住宅区域失败
			/// </summary>
			public const int uEditorResidenceAreaFail = 13729;
			/// <summary>
			/// 不能自己过户给自己
			/// </summary>
			public const int uYouCannotTransferOwnershipToYourself = 13730;
			/// <summary>
			/// 不能自己授权给自己
			/// </summary>
			public const int uYouCanotDelegateToYourself = 13731;
			/// <summary>
			/// 授权账号
			/// </summary>
			public const int uAuthorizedAccount = 13732;


			/// <summary>
			/// The please confirm new password.
			/// </summary>
			public readonly static int PleaseConfirmNewPassword = 11106;
			/// <summary>
			/// 验证码失效
			/// </summary>
			public readonly static int NORECORD = 11107;

			public static readonly int TheMainGatewayIsNotOnLine = 12000;

			public static readonly int TheSceneIsNull = 12002;
			/// <summary>
			/// 该场景中没有执行目标
			/// </summary>
			public static readonly int ThisSceneHaveNoDevice = 12003;
			public static readonly int TheAppVersionIsNewest = 12004;
			public static readonly int Update = 12005;
			public static readonly int UpdateContent = 12006;
			public static readonly int UpdateAppFail = 12007;
			public static readonly int ControlSceneFail = 12008;
			public static readonly int DeleteSceneFail = 12009;
			public static readonly int SaveTheNewRoomOrNo = 12010;
			public static readonly int Updating = 12011;
			public static readonly int CancelUpdating = 12012;
			/// <summary>
			/// 方向与限位
			/// </summary>
			public static readonly int DirectionLimit = 12013;
			/// <summary>
			/// 维护模式
			/// </summary>
			public static readonly int MaintenanceMode = 12014;
			/// <summary>
			/// 启动/禁止手拉开关
			/// </summary>
			public static readonly int Start_Forbid_Hand_Pull_Switch = 12015;
			/// <summary>
			/// 起始方向
			/// </summary>
			public static readonly int InitialDirection = 12016;
			/// <summary>
			/// 正向
			/// </summary>
			public static readonly int ForwardDirection = 12017;
			/// <summary>
			/// 反向
			/// </summary>
			public static readonly int ReverseDirection = 12018;
			/// <summary>
			/// 限位
			/// </summary>
			public static readonly int Limit = 12019;
			/// <summary>
			/// 开始
			/// </summary>
			public static readonly int Start = 12020;
			/// <summary>
			/// 结束
			/// </summary>
			public static readonly int End = 12021;
			/// <summary>
			/// 恢复行程设置
			/// </summary>
			public static readonly int RestoreTravelSettings = 12022;
			/// <summary>
			/// 恢复行程设置后，当前设置将被初始化，确定继续吗？
			/// </summary>
			public static readonly int IsCancelRestoreTravelSettings = 12023;
			/// <summary>
			/// 切换维护模式失败
			/// </summary>
			public static readonly int ChangeMaintenanceMode_Fail = 12024;
			/// <summary>
			/// 是否设置当前位置为开始限位？
			/// </summary>
			public static readonly int SettingStartLimit = 12025;
			/// <summary>
			/// 是否设置当前位置为结束限位？
			/// </summary>
			public static readonly int SettingEndLimit = 12026;
			/// <summary>
			/// 设置开始限位
			/// </summary>
			public static readonly int SetStartLimit = 12027;
			/// <summary>
			/// 设置结束限位
			/// </summary>
			public static readonly int SetEndLimit = 12028;
			/// <summary>
			/// 导轨移动中，请等待。。。
			/// </summary>
			public static readonly int PleaseWaitWhileTheGuidewayIsMoving = 12029;
			/// <summary>
			/// 您的账号已在另一台设备登录，您已被强制下线
			/// </summary>
			public static readonly int YouHaveBeenSignOut = 12030;

			/// <summary>
			/// 场景中已包含该场景
			/// </summary>
			public static readonly int ThisSceneHadTheScene = 12032;
			/// <summary>
			/// 当前没搜索到网关，请先添加网关
			/// </summary>
			public static readonly int NoGateway = 12033;
			/// <summary>
			///当前没有可以添加到该房间的设备
			/// </summary>
			public static readonly int NoDeviceCanAddToRoom = 12034;





			/// <summary>
			/// 当前房间没有设备可以添加到场景
			/// </summary>
			public static readonly int TheRoomNoDeviceAddToScene = 12500;

			/// <summary>
			/// 往上移动
			/// </summary>
			public static readonly int RollerShadeUp = 12501;
			/// <summary>
			/// 往下移动
			/// </summary>
			public static readonly int RollerShadeDown = 12502;


			/// <summary>
			/// 密码长度为{0}个字符
			/// </summary>
			public const int PswLengthMsg = 15000;
			/// <summary>
			/// 密码长度为{0}个字符
			/// </summary>
			public const int PswLengthMsg = 15000;
			/// <summary>
			/// 1个小写字母
			/// </summary>
			@@ -1620,7 +2590,7 @@
			/// </summary>
			public const int uPleaseWait = 15052;
			/// <summary>
			/// 请确保网关与网线连接{0}系统灯每秒闪烁一次
			/// 请确保网关用网线正常连接路由器{0}正常连接则系统指示灯1秒闪烁
			/// </summary>
			public const int ConfirmLineConnectMsg = 15053;
			/// <summary>
			@@ -1956,7 +2926,7 @@
			/// </summary>
			public const int uUserName = 15147;
			/// <summary>
			/// Email
			/// 邮箱
			/// </summary>
			public const int uEmail = 15148;
			/// <summary>
			@@ -2216,9 +3186,9 @@
			/// </summary>
			public const int uBackup = 15225;
			/// <summary>
			/// 请输入备注名称
			/// 请输入备份名称
			/// </summary>
			public const int uPleaseInpuBackup = 15226;
			public const int uPleaseInpuBackupName = 15226;
			/// <summary>
			/// 恢复文件成功
			/// </summary>
			@@ -2796,7 +3766,7 @@
			/// </summary>
			public const int uCarbonMonoxideRevealed = 15393;
			/// <summary>
			/// 有不明物体经过
			/// 有人经过
			/// </summary>
			public const int uHadUnKnowObjectPassed = 15394;
			/// <summary>
			@@ -3000,13 +3970,13 @@
			/// </summary>
			public const int uGetDeviceVersionFail = 15448;
			/// <summary>
			/// 获取传感器灯光设置信息失败
			/// 获取传感器设置信息失败
			/// </summary>
			public const int uGetPirSensorLightSettionFail = 15449;
			public const int uGetPirSensorSettionFail = 15449;
			/// <summary>
			/// 设置传感器灯光配置失败
			/// 设置传感器配置信息失败
			/// </summary>
			public const int uSetPirSensorLightSettionFail = 15450;
			public const int uSetPirSensorSettionFail = 15450;
			/// <summary>
			/// 白天
			/// </summary>
			@@ -3222,7 +4192,7 @@
			/// <summary>
			/// 协调器
			/// </summary>
			public const int uCoordinator= 15514;
			public const int uCoordinator = 15514;
			/// <summary>
			/// 虚拟驱动
			/// </summary>
			@@ -3455,10 +4425,6 @@
			/// 确定移除选中的设备？
			/// </summary>
			public const int uConfirmRemoveSelectDeviceMsg = 15578;
			/// <summary>
			/// 出现未知错误,数据丢失
			/// </summary>
			public const int uUnknownErrorAndDataLost = 15579;
			/// <summary>
			/// 共享数据同步中
			/// </summary>
			@@ -3896,15 +4862,15 @@
			/// </summary>
			public const int uDoorLockAlarmMsg5 = 15699;
			/// <summary>
			/// 门锁报警信息6：常开模式开启
			/// 门锁报警信息6：常开模式开启(门锁触发)
			/// </summary>
			public const int uDoorLockAlarmMsg6 = 15700;
			/// <summary>
			/// 门锁报警信息7：常开模式结束
			/// 门锁报警信息7：常开模式结束(门锁触发)
			/// </summary>
			public const int uDoorLockAlarmMsg7 = 15701;
			/// <summary>
			/// 门锁报警信息8：门铃触发
			/// 门锁报警信息8：有人访问
			/// </summary>
			public const int uDoorLockAlarmMsg8 = 15702;
			/// <summary>
			@@ -4216,11 +5182,11 @@
			/// </summary>
			public const int uSearchGatewayFailMsg1 = 15779;
			/// <summary>
			/// 1.长按ZB/RST键20秒，网关恢复出厂设置，指示灯全部熄灭后，重新入网。
			/// 1.短按HID/WCFG按键,系统指示灯快闪3秒,网关进入换绑模式,强制网关绑定到当前APP
			/// </summary>
			public const int uSearchGatewayFailMsg2 = 15780;
			/// <summary>
			/// 2.点按HID/WCFG键，进入网关换绑模式，系统指示灯快闪5秒。
			/// 2.长按网关ZB/RST按键20秒以上,直到所有指示灯同时灭,即恢复出厂设置并重启
			/// </summary>
			public const int uSearchGatewayFailMsg3 = 15781;
			/// <summary>
			@@ -4348,11 +5314,11 @@
			/// </summary>
			public const int uCommitCurtainLimitFail = 15812;
			/// <summary>
			/// 确认当前位置{0}为开限位?
			/// 确认当前位置为开限位?
			/// </summary>
			public const int uCommitCurtainOpenLimitMsg = 15813;
			/// <summary>
			/// 确认当前位置{0}为合限位?
			/// 确认当前位置为合限位?
			/// </summary>
			public const int uCommitCurtainCloseLimitMsg = 15814;
			/// <summary>
			@@ -4376,9 +5342,9 @@
			/// </summary>
			public const int uCommitCurtainDownLimitMsg = 15819;
			/// <summary>
			/// 如果满足
			/// 如果满足低亮度环境
			/// </summary>
			public const int uIfSatisfied = 15820;
			public const int uIfTheLowBrightnessEnvironmentIsSatisfied = 15820;
			/// <summary>
			/// 就会
			/// </summary>
			@@ -4400,9 +5366,9 @@
			/// </summary>
			public const int uSecond = 15825;
			/// <summary>
			/// 照明等级
			/// 照度值
			/// </summary>
			public const int uLightLevel = 15826;
			public const int uIlluminationValue = 15826;
			/// <summary>
			/// 低
			/// </summary>
			@@ -4596,7 +5562,7 @@
			/// </summary>
			public const int uGetPictrueFromAlbum = 15874;
			/// <summary>
			/// 出现未知错误
			/// 抱歉，程序出现错误
			/// </summary>
			public const int uUnKnownError = 15875;
			/// <summary>
			@@ -4718,21 +5684,21 @@
			/// <summary>
			/// 跳转到移动设备
			/// </summary>
			public const int uJumpToMobileDevice= 15905;
			public const int uJumpToMobileDevice = 15905;
			/// <summary>
			/// WLAN设置连接家庭WiFi
			/// </summary>
			public const int uWlanConnectHomeWifi = 15906;
			/// <summary>
			/// 长按网关HID/WCFG按键20秒{0}系统灯快闪60秒则进入配网状态{0}系统灯每秒闪烁一次{0}则连接成功
			/// 网关如果正常连接路由器{0}系统指示灯会1秒闪烁
			/// </summary>
			public const int uAddUdpWirelessGatewayMsg = 15907;
			public const int uAddUdpWirelessGatewayMsg1 = 15907;
			/// <summary>
			/// 长按网关HID/WCFG按键5秒{0}系统灯常亮60秒后则进入配网状态
			/// 请先长按HID/WCFG按键大概5秒{0}直到系统指示灯常亮{0}网关进入AP模式热点
			/// </summary>
			public const int uAddApWirelessGatewayMsg1 = 15908;
			/// <summary>
			/// 跳转到移动设备WLAN设置{0}选择hdlZigbeeGW-xxxx网络
			/// 1.网关热点的账号为hdlZigbeeGW-XXX,密码为hdl123456{0}2.具体账号和密码可查看网关标签{0}3.点击"{1}"完成手机连接网关热点{0}4.点击下一步
			/// </summary>
			public const int uAddApWirelessGatewayMsg2 = 15909;
			/// <summary>
			@@ -4740,11 +5706,11 @@
			/// </summary>
			public const int uPleaseInputHomeWifiAccount = 15910;
			/// <summary>
			/// 请前往移动设备WLAN设置{0}重新连接家庭wiFi
			/// 手机去设置连接路由器
			/// </summary>
			public const int uAddApWirelessGatewayMsg3 = 15911;
			/// <summary>
			/// 系统灯每秒闪烁一次{0}则连接成功
			/// 网关如果正常连接路由器{0}系统指示灯会1秒闪烁
			/// </summary>
			public const int uAddApWirelessGatewayMsg4 = 15912;
			/// <summary>
			@@ -4780,7 +5746,7 @@
			/// </summary>
			public const int uSubmit = 15922;
			/// <summary>
			/// 提交成功,感谢您的意见
			/// 您的反馈已成功提交
			/// </summary>
			public const int uSubmitSuccessMsg = 15923;
			/// <summary>
			@@ -4999,6 +5965,1046 @@
			/// 确认标记全部消息为已读?
			/// </summary>
			public const int uUnTipAllMessageMsg = 15977;
			/// <summary>
			/// 通信链接失败
			/// </summary>
			public const int uCommunicationLinkFail = 15978;
			/// <summary>
			/// 获取网络SSID失败
			/// </summary>
			public const int uGetSsidFail = 15979;
			/// <summary>
			/// 密码发送失败
			/// </summary>
			public const int uSendPasswordFail = 15980;
			/// <summary>
			/// 请选择hdlZigbeeGW-xxxx网络
			/// </summary>
			public const int uPleaseSelectGatewayXXNet = 15981;
			/// <summary>
			/// 请连接家庭WiFi
			/// </summary>
			public const int uPleaseLinkHomeWifi = 15982;
			/// <summary>
			/// 正在获取分享数据
			/// </summary>
			public const int uShardContentGetting = 15983;
			/// <summary>
			/// 请先去设置手机连接到路由器{0}然后长按网关HID/WCFG按键大概20秒{0}直到系统指示灯快闪{0}网关进入UDP模式WIFI配网
			/// </summary>
			public const int uAddUdpWirelessGatewayMsg2 = 15984;
			/// <summary>
			/// 网关添加指引
			/// </summary>
			public const int uAddGatewayGuide = 15985;
			/// <summary>
			/// 请用网线连接网关网口到路由器，网关上电或者恢复出厂设
			/// 置之后，系统进行重启，持续50秒（系统指示灯SYS常亮），
			/// 待系统指示灯SYS变成1秒周期闪烁，此时可以使用手机APP
			/// 进行添加网关步骤。
			/// </summary>
			public const int uAddWiredGatewayHelp1 = 15986;
			/// <summary>
			/// 恢复出厂设置：长按ZB/RST按键10秒，此时Z igee网络指
			/// 示灯（ZB）状态为快闪，待三个灯全灭，表示恢复出厂设置
			/// 成功，则可松开按键，网关开始重启系统
			/// </summary>
			public const int uAddWiredGatewayHelp2 = 15987;
			/// <summary>
			/// 网关硬件问题帮助
			/// </summary>
			public const int uGatewayHardDeviceHelp = 15988;
			/// <summary>
			/// 1.网口指示灯不亮,检查网线或路由器是否正常
			/// </summary>
			public const int uWiredGatewayHardDeviceHelp1 = 15989;
			/// <summary>
			/// 2.系统启动之后(系统指示灯5秒闪烁,表示系统启动成功),系统指示灯不是1秒闪烁,检查路由器是否开启DHCP自动分配IP
			/// </summary>
			public const int uWiredGatewayHardDeviceHelp2 = 15990;
			/// <summary>
			/// 1.请先长按网关HID/WCFG按键大概20秒,直到系统指示灯快闪,网关进入UDP模式WIFI配网
			/// </summary>
			public const int uAddWirelessUdpGatewayHelp1 = 15993;
			/// <summary>
			/// 1.请先长按网关HID/WCFG按键大概5秒,直到系统指示灯常亮,网关进入AP模式WIFI配网
			/// </summary>
			public const int uAddWirelessApGatewayHelp1 = 15994;
			/// <summary>
			/// 1.短按HID/WCFG按键,查看指示灯是否有变化,可判断按键和指示灯是否损坏
			/// </summary>
			public const int uWirelessGatewayHardDeviceHelp1 = 15995;
			/// <summary>
			/// 2.长按HID/WCFG按键,查看指示灯是否有变化,可判断按键和指示灯是否损坏
			/// </summary>
			public const int uWirelessGatewayHardDeviceHelp2 = 15996;
			/// <summary>
			/// 3.系统指示灯不是1秒闪烁,检查路由器是否开启DHCP自动分配IP
			/// </summary>
			public const int uWirelessGatewayHardDeviceHelp3 = 15997;
			/// <summary>
			/// 请前往住宅管理{0}设置住宅的地理位置
			/// </summary>
			public const int uGotoResidenceAndSetLocation = 15998;
			/// <summary>
			/// 未知楼层
			/// </summary>
			public const int uUnKnownFloor = 15999;
			/// <summary>
			/// 如果不设置住宅的地理位置,则会影响自动化地理围栏功能的设置
			/// </summary>
			public const int uNotSetLocationWillAffectTheAutomaticGeofencingFunction = 16000;
			/// <summary>
			/// 空调模块版本
			/// </summary>
			public const int uAirConditionerModelVersion = 16001;
			/// <summary>
			/// 通信芯片
			/// </summary>
			public const int uCommunicationChip = 16002;
			/// <summary>
			/// 空调模块
			/// </summary>
			public const int uAirConditioningModule = 16003;
			/// <summary>
			/// 获取失败
			/// </summary>
			public const int uGettingFail = 16004;
			/// <summary>
			/// 无法识别
			/// </summary>
			public const int uUnDistinguish = 16005;
			/// <summary>
			/// 正在重置电机
			/// </summary>
			public const int uElectricalMachineryResetting = 16006;
			/// <summary>
			/// 大金空调模块
			/// </summary>
			public const int uDakAirConditioningModule = 16007;
			/// <summary>
			/// 没有可升级的空调模块
			/// </summary>
			public const int uNotHadAirConditioningUpdateModule = 16008;
			/// <summary>
			/// 空调升级模块
			/// </summary>
			public const int uAirConditioningUpdateModule = 16009;
			/// <summary>
			/// 获取空调模块版本失败
			/// </summary>
			public const int uGetAirConditionerModelVersionFail = 16010;
			/// <summary>
			/// 发送升级命令失败
			/// </summary>
			public const int uSendUpdateComandFail = 16011;
			/// <summary>
			/// 版本号相同,升级失败
			/// </summary>
			public const int uVersionIsEqualAndUpdateFail = 16012;
			/// <summary>
			/// 校验版本号失败
			/// </summary>
			public const int uCheckVersionFail = 16013;
			/// <summary>
			/// 检测设备版本
			/// </summary>
			public const int uCheckDeviceVersion = 16014;
			/// <summary>
			/// 响应超时,检测设备版本失败
			/// </summary>
			public const int uResponseTimeoutsAndCheckDeviceVersionFail = 16015;
			/// <summary>
			/// 正在发送升级完成的命令
			/// </summary>
			public const int uSendingFinishUpdateComand = 16016;
			/// <summary>
			/// 响应超时,发送升级完成的命令失败
			/// </summary>
			public const int uResponseTimeoutsAndSendingFinishUpdateComandFail = 16017;
			/// <summary>
			/// 重工空调模块
			/// </summary>
			public const int uHicAirConditioningModule = 16018;
			/// <summary>
			/// 指示灯变绿、闪烁
			/// </summary>
			public const int uPilotLinghtInCreanAndLinght = 16019;
			/// <summary>
			/// 针孔式重置按键
			/// </summary>
			public const int uPinholeTypeResetButton = 16020;
			/// <summary>
			/// 信号图标快闪
			/// </summary>
			public const int uSignalIconFlash = 16021;
			/// <summary>
			/// 信号图标
			/// </summary>
			public const int uSignalIcon = 16022;
			/// <summary>
			/// 提醒
			/// </summary>
			public const int uRemind = 16023;
			/// <summary>
			/// 绑定成功！下次你可以用微信{0}账号快速登录啦
			/// </summary>
			public const int uBindWebchatSuccessMsg = 16024;
			/// <summary>
			/// 好的
			/// </summary>
			public const int uWell = 16025;
			/// <summary>
			/// 已执行
			/// </summary>
			public const int uExecuted = 16026;
			/// <summary>
			/// 门锁触发警报
			/// </summary>
			public const int uDoorLocksAlarmHadTriggered = 16027;
			/// <summary>
			/// 我的住宅
			/// </summary>
			public const int uMyResidence = 16028;
			/// <summary>
			/// 客厅
			/// </summary>
			public const int uLivingRoom = 16029;
			/// <summary>
			/// 阳台
			/// </summary>
			public const int uBalcony = 16030;
			/// <summary>
			/// 卧室
			/// </summary>
			public const int uBedroom = 16031;
			/// <summary>
			/// 左右滑动,切换房间卡片
			/// </summary>
			public const int uSlideLeftAndRightToSwitchRoomCards = 16032;
			/// <summary>
			/// 右滑进入房间列表
			/// </summary>
			public const int uSlideRightToRoomList = 16033;
			/// <summary>
			/// 闪光灯
			/// </summary>
			public const int uFlashlamp = 16034;
			/// <summary>
			/// 房间的内容在此处显示
			/// </summary>
			public const int uTheContentsOfTheRoomAreShownHere = 16035;
			/// <summary>
			/// 我知道了
			/// </summary>
			public const int uIKnwon = 16036;
			/// <summary>
			/// 分享数据已经变更,请重新登陆
			/// </summary>
			public const int uShardDataIsChangedPleaseLoginAgain = 16037;
			/// <summary>
			/// 工作模式
			/// </summary>
			public const int uWorkMode = 16038;
			/// <summary>
			/// 控制模式
			/// </summary>
			public const int uControlMode = 16039;
			/// <summary>
			/// 触发模式
			/// </summary>
			public const int uTriggerMode = 16040;
			/// <summary>
			/// 上报间隔
			/// </summary>
			public const int uReportTimeSpace = 16041;
			/// <summary>
			/// 全自动模式
			/// </summary>
			public const int uFullAutoMode = 16042;
			/// <summary>
			/// 半自动模式
			/// </summary>
			public const int uHafeAutoMode = 16043;
			/// <summary>
			/// 调光模式
			/// </summary>
			public const int uDimmingMode = 16044;
			/// <summary>
			/// 开关模式
			/// </summary>
			public const int uSwitchMode = 16045;
			/// <summary>
			/// 开灯亮度
			/// </summary>
			public const int uTurnOnBrightness = 16046;
			/// <summary>
			/// 慢启动
			/// </summary>
			public const int uSlowStartup = 16047;
			/// <summary>
			/// 慢关闭
			/// </summary>
			public const int uSlowClose = 16048;
			/// <summary>
			/// 亮度
			/// </summary>
			public const int uBrightness = 16049;
			/// <summary>
			/// 获取传感器亮度值失败
			/// </summary>
			public const int uGetPirSensorLuxFail = 16050;
			/// <summary>
			/// 当前亮度值
			/// </summary>
			public const int uNowBrightnessValue = 16051;
			/// <summary>
			/// 暗
			/// </summary>
			public const int uDark = 16052;
			/// <summary>
			/// 亮
			/// </summary>
			public const int uBright = 16053;
			/// <summary>
			/// 在室内条件下，黄昏照度值约为10lux，阴天照度值约为5~50lux，请根据实际需要进行调节
			/// </summary>
			public const int uPirBrightnessTipMsg = 16054;
			/// <summary>
			/// 震动反馈
			/// </summary>
			public const int uVibrationFeedback = 16055;
			/// <summary>
			/// 获取震动反馈配置信息失败
			/// </summary>
			public const int uGetVibrationFeedbackSettionFail = 16056;
			/// <summary>
			/// 设置震动反馈配置信息失败
			/// </summary>
			public const int uSetVibrationFeedbackSettionFail = 16057;
			/// <summary>
			/// 我的家
			/// </summary>
			public const int uMyHome = 16058;
			/// <summary>
			/// 长按“我的家”{0}可切换我的住宅
			/// </summary>
			public const int uLongClickMyHomeCanChangedHome = 16059;
			/// <summary>
			/// 办公室
			/// </summary>
			public const int uWorkRoom = 16060;
			/// <summary>
			/// 电机数据异常,确认已经安装导轨后,请重置电机
			/// </summary>
			public const int uCurtainDataIsErrorPleaseResetCurtain = 16061;
			/// <summary>
			/// 获取空调摆风状态失败
			/// </summary>
			public const int uGetAirConditionerSwingFunctionFail = 16062;
			/// <summary>
			/// 设置空调摆风失败
			/// </summary>
			public const int uSetAirConditionerSwingFunctionFail = 16063;
			/// <summary>
			/// 按住此按键
			/// </summary>
			public const int uPressAndHoldThisKey = 16064;
			/// <summary>
			/// 按键指示灯亮起
			/// </summary>
			public const int uKeyIndicatorLightsUp = 16065;
			/// <summary>
			/// 接近感应
			/// </summary>
			public const int uProximityInduction = 16066;
			/// <summary>
			/// 空调目标
			/// </summary>
			public const int uAirConditionerTarget = 16067;
			/// <summary>
			/// 地暖目标
			/// </summary>
			public const int uFloorHeatingTarget = 16068;
			/// <summary>
			/// 新风目标
			/// </summary>
			public const int uNewWindTarget = 16069;
			/// <summary>
			/// 屏幕亮度级别
			/// </summary>
			public const int uScreenBrightnesLevel = 16070;
			/// <summary>
			/// 级
			/// </summary>
			public const int uRank = 16071;
			/// <summary>
			/// 背光灯亮度
			/// </summary>
			public const int uBacklightBrightness = 16072;
			/// <summary>
			/// 打开
			/// </summary>
			public const int uOpen1 = 16073;
			/// <summary>
			/// 日立空调模块
			/// </summary>
			public const int uHitachiAirConditioningModule = 16074;
			/// <summary>
			/// 安装位置
			/// </summary>
			public const int uInstallationLocation = 16075;
			/// <summary>
			/// 所属住宅
			/// </summary>
			public const int uBelongResidence = 16076;
			/// <summary>
			/// 不分配
			/// </summary>
			public const int uUndistributed = 16077;
			/// <summary>
			/// 室内机
			/// </summary>
			public const int uIndoorUnit = 16078;
			/// <summary>
			/// 按键
			/// </summary>
			public const int uPanelButton = 16079;
			/// <summary>
			/// 分享住宅已更改，请联系管理员！
			/// </summary>
			public const int uShardResidenceHadDeletePleaseTakeToAdmin = 16080;
			/// <summary>
			/// 获取执行目标失败
			/// </summary>
			public const int uGetAdjustTargetFail = 16081;
			/// <summary>
			/// 没有可以添加的场景
			/// </summary>
			public const int uNotHadAddScene = 16082;
			/// <summary>
			/// 请添加执行目标
			/// </summary>
			public const int uPleaseAddAdjustTarget = 16083;
			/// <summary>
			/// 添加执行目标失败
			/// </summary>
			public const int uAddAdjustTargetFail = 16084;
			/// <summary>
			/// 个别执行目标添加失败
			/// </summary>
			public const int uSomeAdjustTargetAddFail = 16085;
			/// <summary>
			/// 初始化执行目标失败
			/// </summary>
			public const int uInitAdjustTargetFail = 16086;
			/// <summary>
			/// 修改场景名称失败
			/// </summary>
			public const int uEditorSceneNameFail = 16087;
			/// <summary>
			/// 门锁报警信息9：常开模式开启(网关触发)
			/// </summary>
			public const int uDoorLockAlarmMsg9 = 16088;
			/// <summary>
			/// 门锁报警信息10：常开模式结束(网关触发)
			/// </summary>
			public const int uDoorLockAlarmMsg10 = 16089;
			/// <summary>
			/// 常开模式
			/// </summary>
			public const int uNormallyOpenMode = 16090;
			/// <summary>
			/// 常开模式手动开启
			/// </summary>
			public const int uNormallyOpenModeManualOpen = 16091;
			/// <summary>
			/// 常开模式手动取消
			/// </summary>
			public const int uNormallyOpenModeManualClose = 16092;
			/// <summary>
			/// 常开模式启用{0}小时
			/// </summary>
			public const int uNormallyOpenModeOpenSomeTime = 16093;
			/// <summary>
			/// 您的权限已经变更,请重新登陆
			/// </summary>
			public const int uYouAccessHadChangedPleaseTakeToAdmin = 16094;
			/// <summary>
			/// 我已阅读并同意
			/// </summary>
			public const int uMyHadReadAndAgree = 16095;
			/// <summary>
			/// 隐私权政策
			/// </summary>
			public const int uPrivacyPolicy = 16096;
			/// <summary>
			/// 和
			/// </summary>
			public const int uAnd = 16097;
			/// <summary>
			/// 服务条款
			/// </summary>
			public const int uTermsOfService = 16098;
			/// <summary>
			/// 请先阅读并同意《隐私权政策》和《服务条款》
			/// </summary>
			public const int uPleaseReadAndAgreePrivacyPolicyMsg = 16099;
			/// <summary>
			/// 门锁报警信息11：常开模式开启(自动化触发)
			/// </summary>
			public const int uDoorLockAlarmMsg11 = 16100;
			/// <summary>
			/// 门锁报警信息12：常开模式结束(自动化触发)
			/// </summary>
			public const int uDoorLockAlarmMsg12 = 16101;
			/// <summary>
			/// 门锁报警信息13：临时密码开锁成功
			/// </summary>
			public const int uDoorLockAlarmMsg13 = 16102;
			/// <summary>
			/// 门锁报警信息14：临时密码开锁失败
			/// </summary>
			public const int uDoorLockAlarmMsg14 = 16103;
			/// <summary>
			/// 电机空调模块
			/// </summary>
			public const int uSaecAirConditioningModule = 16104;
			/// <summary>
			/// 东芝空调模块
			/// </summary>
			public const int uToshibaAirConditioningModule = 16105;
			/// <summary>
			/// 格力空调模块
			/// </summary>
			public const int uGreeAirConditioningModule = 16106;
			/// <summary>
			/// 美的空调模块
			/// </summary>
			public const int uMideaAirConditioningModule = 16107;
			/// <summary>
			/// 虚拟网关
			/// </summary>
			public const int uVirtualGateway = 16108;
			/// <summary>
			/// 玄关
			/// </summary>
			public const int uVestibule = 16109;
			/// <summary>
			/// 厨房
			/// </summary>
			public const int uKitchen = 16110;
			/// <summary>
			/// 走廊
			/// </summary>
			public const int uCorridor = 16111;
			/// <summary>
			/// 虚拟账号
			/// </summary>
			public const int uVirtualAccount = 16112;
			/// <summary>
			/// 灯全开
			/// </summary>
			public const int uAllLightOpen = 16113;
			/// <summary>
			/// 灯全关
			/// </summary>
			public const int uAllLightClose = 16114;
			/// <summary>
			/// 常开自动化手动取消
			/// </summary>
			public const int uNormallyOpenLogicManualClose = 16115;
			/// <summary>
			/// 游客体验
			/// </summary>
			public const int uExperienceAccount = 16116;
			/// <summary>
			/// 智能改变生活 \| Enjoy smart life
			/// </summary>
			public const int uLogoPageText = 16117;
			/// <summary>
			/// 网络不稳定，场景列表信息缺损
			/// </summary>
			public const int uNetworkUnStableAndSceneInfoIsNotFull = 16118;
			/// <summary>
			/// DATA绿色指示灯闪烁
			/// </summary>
			public const int uDataGreanPilotLampLinght = 16119;
			/// <summary>
			/// 联系方式
			/// </summary>
			public const int uContactInformation = 16120;
			/// <summary>
			/// 请输入您的联系方式
			/// </summary>
			public const int uPleaseInputYourContactInformation = 16121;
			/// <summary>
			/// 该内容不能省略
			/// </summary>
			public const int uThisContentCanNotOmitted = 16122;
			/// <summary>
			/// Mini网关
			/// </summary>
			public const int uMiniGateway = 16123;
			/// <summary>
			/// 添加Mini网关
			/// </summary>
			public const int uAddMiniGateway = 16124;
			/// <summary>
			/// 1.上电,系统启动(绿灯闪烁50秒){0}2.配网模式(蓝色常亮20秒){0}3.网关建立WI-FI热点成功(蓝灯5秒周期闪烁){0}4.点击下一步
			/// </summary>
			public const int uAddMiniGatewayMsg1 = 16125;
			/// <summary>
			/// 色温
			/// </summary>
			public const int uColorTemperature = 16128;
			/// <summary>
			/// Mini夜灯
			/// </summary>
			public const int uMiniNightLight = 16129;
			/// <summary>
			/// 燃气泄露
			/// </summary>
			public const int uGasLeakage = 16130;
			/// <summary>
			/// 忽略
			/// </summary>
			public const int uNeglect = 16131;
			/// <summary>
			/// 蜂鸣器开关
			/// </summary>
			public const int uBuzzerSwitch = 16132;
			/// <summary>
			/// 小夜灯开关
			/// </summary>
			public const int uMiniLightSwitch = 16133;
			/// <summary>
			/// 设置设备功能类型失败
			/// </summary>
			public const int uSetDeviceFunctionTypeFail = 16134;
			/// <summary>
			/// 获取场景列表失败,网关回复超时
			/// </summary>
			public const int uGetSceneListFailAndTimeOut = 16135;
			/// <summary>
			/// 需重新绑定
			/// </summary>
			public const int uNeedToRebind = 16136;
			/// <summary>
			/// 出现意外情况,数据丢失
			/// </summary>
			public const int uUnKnownErrorAndLostData = 16137;
			/// <summary>
			/// 烟雾传感器
			/// </summary>
			public const int uSensorFire = 16138;
			/// <summary>
			/// 水侵传感器
			/// </summary>
			public const int uSensorWater = 16139;
			/// <summary>
			/// 燃气传感器
			/// </summary>
			public const int uSensorCarbonMonoxide = 16140;
			/// <summary>
			/// 紧急按钮
			/// </summary>
			public const int uSensorEmergencyButton = 16141;
			/// <summary>
			/// 门窗传感器
			/// </summary>
			public const int uSensorDoorWindow = 16142;
			/// <summary>
			/// 钥匙扣
			/// </summary>
			public const int uKeyfob = 16143;
			/// <summary>
			/// 色值号为6位（由任意数字+字母组合）
			/// </summary>
			public const int uColorLengthMsg = 16144;
			/// <summary>
			/// 长按此按键
			/// </summary>
			public const int uLongPressThisButton = 16145;
			/// <summary>
			/// Mini网关最大只能添加16个设备
			/// </summary>
			public const int uMiniGatewayMaxDeviceCountMsg = 16146;
			/// <summary>
			/// 开关键
			/// </summary>
			public const int uSwitchButton = 16147;
			/// <summary>
			/// 过户
			/// </summary>
			public const int uTransfer = 16148;
			/// <summary>
			/// 住宅过户
			/// </summary>
			public const int uTransferOfResidence = 16149;
			/// <summary>
			/// 转移住宅到其他Evoyo
			/// </summary>
			public const int uTransferOfResidenceToOtherEvoyoAccount1 = 16150;
			/// <summary>
			/// Home账号
			/// </summary>
			public const int uTransferOfResidenceToOtherEvoyoAccount2 = 16151;
			/// <summary>
			/// 该操作不可逆，请注意：
			/// </summary>
			public const int uThisOperationIsIrreversiblePleaseNote = 16152;
			/// <summary>
			/// 1.接收方为Evoyo Home有效注册账号
			/// </summary>
			public const int uTheReceiverIsValidAccountForEvoyoHome = 16153;
			/// <summary>
			/// 2.接收方与过户方不可以为同一个账号
			/// </summary>
			public const int uTheReceiverAndTheTransferPartyCannotBeTheSameAccount = 16154;
			/// <summary>
			/// 3.过户成功后，将取消过户方成员对该住宅的使用权
			/// </summary>
			public const int uIfTheTransferIsSuccessfulTheRightToUseTheHouseWillBeCancelled = 16155;
			/// <summary>
			/// 过户账号
			/// </summary>
			public const int uTransferResidenceAccount = 16156;
			/// <summary>
			/// 请输入接收方的手机号或Email
			/// </summary>
			public const int uPleaseInputReceiverPhoneOrEmail = 16157;
			/// <summary>
			/// 查看
			/// </summary>
			public const int uSearch1 = 16158;
			/// <summary>
			/// 定时自动关闭
			/// </summary>
			public const int uAutomaticTimingOff = 16159;
			/// <summary>
			/// 不关闭
			/// </summary>
			public const int uNotClose = 16160;
			/// <summary>
			/// 终止
			/// </summary>
			public const int uTermination = 16161;
			/// <summary>
			/// 正在移交给用户,请稍后...
			/// </summary>
			public const int uHandoverToUserPleaseWaitting = 16162;
			/// <summary>
			/// 正在授权给调试人员,请稍后...
			/// </summary>
			public const int uAuthorizingToDebuggingPersonnelPleaseWaitting = 16163;
			/// <summary>
			/// 过户成功
			/// </summary>
			public const int uTransferSuccess = 16164;
			/// <summary>
			/// 过户失败
			/// </summary>
			public const int uTransferFail = 16165;
			/// <summary>
			/// 恭喜XXXXX成为「NNNNN」管理员
			/// </summary>
			public const int uCongratulationsXXBecomingNNAdministrator = 16166;
			/// <summary>
			/// 检测到还没有备份,请先备份
			/// </summary>
			public const int uIsNotHadBackupByCheckPleaseBackup = 16167;
			/// <summary>
			/// 替换
			/// </summary>
			public const int uReplace = 16168;
			/// <summary>
			/// 替换网关
			/// </summary>
			public const int uReplaceGateway = 16169;
			/// <summary>
			/// 请选择被替换的网关
			/// </summary>
			public const int uPleaseSelectGatewayToBeReplaced = 16170;
			/// <summary>
			/// 人脸识别
			/// </summary>
			public const int uFaceRecognition = 16171;
			/// <summary>
			/// 静脉纹
			/// </summary>
			public const int uStriaVenosus = 16172;
			/// <summary>
			/// 静脉纹开锁成功
			/// </summary>
			public const int uStriaVenosusUnLockSuccess = 16173;
			/// <summary>
			/// 静脉纹开锁失败
			/// </summary>
			public const int uStriaVenosusUnLockFail = 16174;
			/// <summary>
			/// 人脸识别开锁成功
			/// </summary>
			public const int uFaceRecognitionUnLockSuccess = 16175;
			/// <summary>
			/// 人脸识别开锁失败
			/// </summary>
			public const int uFaceRecognitionUnLockFail = 16176;
			/// <summary>
			/// 确认替换掉网关:{0}?
			/// </summary>
			public const int uReplaceGatewayConfirmMsg = 16177;
			/// <summary>
			/// 正在获取配置数据
			/// </summary>
			public const int uGettingConfigurationData = 16178;
			/// <summary>
			/// 目标网关检测不到备份数据,无法执行替换操作
			/// </summary>
			public const int uTaegetGatewayNotHadBackupAndDoNotReplace = 16179;
			/// <summary>
			/// 正在变更本地配置
			/// </summary>
			public const int uChangingLocalConfiguration = 16180;
			/// <summary>
			/// 替换网关成功
			/// </summary>
			public const int uReplacegatewaySuccess = 16181;
			/// <summary>
			/// 选择使用的备份
			/// </summary>
			public const int uSelectUseBackup = 16182;
			/// <summary>
			/// 是否使用备份:{0}?
			/// </summary>
			public const int uSelectUseBackupConfirmMsg = 16183;
			/// <summary>
			/// 最高处
			/// </summary>
			public const int uTheHighestPoint = 16184;
			/// <summary>
			/// 最低处
			/// </summary>
			public const int uTheLowestPoint = 16185;
			/// <summary>
			/// 打开烘干
			/// </summary>
			public const int uOpenDry = 16186;
			/// <summary>
			/// 关闭烘干
			/// </summary>
			public const int uCloseDry = 16187;
			/// <summary>
			/// 打开消毒
			/// </summary>
			public const int uOpenDisinfect = 16188;
			/// <summary>
			/// 关闭消毒
			/// </summary>
			public const int uCloseDisinfect = 16189;
			/// <summary>
			/// 打开照明
			/// </summary>
			public const int uOpenLighting = 16190;
			/// <summary>
			/// 关闭照明
			/// </summary>
			public const int uCloseLighting = 16191;
			/// <summary>
			/// 打开风干
			/// </summary>
			public const int uOpenAirdry = 16192;
			/// <summary>
			/// 关闭风干
			/// </summary>
			public const int uCloseAirdry = 16193;
			/// <summary>
			/// 网关上电配网
			/// </summary>
			public const int uGatewayPowerDistributionNetwork = 16194;
			/// <summary>
			/// 手机连接网关热点
			/// </summary>
			public const int uMobileConnectionGatewayHotspot = 16195;
			/// <summary>
			/// 请输入WIFI和密码
			/// </summary>
			public const int uPleaseInputWifiAndPassword = 16196;
			/// <summary>
			/// 发送局域网账号、密码
			/// </summary>
			public const int uSendLanAccountAndPassword = 16197;
			/// <summary>
			/// 1.填写路由器的账号和密码{0}2.点击下一步，将路由器账号和密码发送至网关{0}3.网关接收成功，白光闪烁
			/// </summary>
			public const int uAddMiniGatewayMsg2 = 16198;
			/// <summary>
			/// 网关连接路由器
			/// </summary>
			public const int uGatewayConnectionRouter = 16199;
			/// <summary>
			/// 1.网关接收路由器账号和密码成功{0}2.系统重启(绿灯闪烁50秒){0}3.连接局域网成功(蓝灯1秒周期闪烁){0}4.点击"{1}"完成手机连接家庭WIFI{0}5.点击下一步
			/// </summary>
			public const int uAddMiniGatewayMsg3 = 16200;
			/// <summary>
			/// 手机连接网关
			/// </summary>
			public const int uMobileConnectionGateway = 16201;
			/// <summary>
			/// 1.app若显示连接的网关设备,表明连接成功{0}2.请前往添加其他设备{0}3.若长时间无法连接成功,请前往"查看帮助"
			/// </summary>
			public const int uAddMiniGatewayMsg4 = 16202;
			/// <summary>
			/// 异常情况处理
			/// </summary>
			public const int uExceptionHandling = 16203;
			/// <summary>
			/// 网关硬件文件帮助
			/// </summary>
			public const int uGatewayHardwareFileHelp = 16204;
			/// <summary>
			/// 操作指引
			/// </summary>
			public const int uOperationGuide = 16205;
			/// <summary>
			/// 1、按击开关键,若开关键和夜灯无异常,则夜灯亮起白色环形灯光
			/// </summary>
			public const int uAddMiniGatewayHelp1 = 16206;
			/// <summary>
			/// 2、长按或短按恢复出厂设置设置按键,若按键和状态指示灯无异常,则快闪绿色灯光
			/// </summary>
			public const int uAddMiniGatewayHelp2 = 16207;
			/// <summary>
			/// 恢复出厂设置:用卡针长按恢复出厂设置按键10秒,此时网关状态为指示灯绿色快闪,待灯光闪烁停止,即可松开按键,网关开始系统重启(绿光一秒周期闪烁)
			/// </summary>
			public const int uAddMiniGatewayHelp3 = 16208;
			/// <summary>
			/// 换绑:若需要更换绑定账号,不清除数据,短按恢复出厂键,60秒内重新用新的账号搜索网关即可
			/// </summary>
			public const int uAddMiniGatewayHelp4 = 16209;
			/// <summary>
			/// 1、添加网关过程中，局域网账号和密码发送错误，网关一直
			///持续保持正在联网状态（持续蓝灯）3分钟，随后转成建立网
			///关热点状态（蓝灯5秒间隔闪烁），此时可手机APP退出至网
			///关添加页面，重新进行网关添加，重新发送账号，密码
			/// </summary>
			public const int uAddMiniGatewayHelp5 = 16210;
			/// <summary>
			///2、在网关已经连接局域网状态下（蓝色灯1秒间隔闪烁），
			///手机APP不小心退出了连接界面，可前往有线网关界面，直
			///接进行网关连接
			/// </summary>
			public const int uAddMiniGatewayHelp6 = 16211;
			/// <summary>
			///3、在网关已经连接局域网状态下（蓝色灯1秒间隔闪烁），
			///手机APP一直连接不上网关，可以先退出APP后台，重新登
			///入进行连接
			/// </summary>
			public const int uAddMiniGatewayHelp7 = 16212;
			/// <summary>
			/// 4、WIFI有波动，导致网关联网失败（持续蓝灯），可重新上电
			/// </summary>
			public const int uAddMiniGatewayHelp8 = 16213;
			/// <summary>
			/// 1、短按ZB/RST按键，ZB网络指示灯一直闪烁，则表面此按键和指示灯均正常
			/// </summary>
			public const int uAddWirelessGatewayHelp1 = 16214;
			/// <summary>
			///2、短按HID/WCFG按键，系统指示灯SYS闪烁，表面此按键和指示灯均正常
			/// </summary>
			public const int uAddWirelessGatewayHelp2 = 16215;
			/// <summary>
			///3、RESTART按键为重启键，短按此按键，网关重启，系统指示灯开始常亮
			/// </summary>
			public const int uAddWirelessGatewayHelp3 = 16216;
			/// <summary>
			///1、恢复出厂设置：长按ZB/RST键位10秒，10秒内，Zigbee
			///网络指示灯（ZB）状态为快闪，10秒钟后，系统指示灯SYS
			///快闪5秒，5秒内连续按ZB/RST键两次，若所有灯熄灭，则恢
			///复出厂设置成功，网关开始重启系统。
			/// </summary>
			public const int uAddWirelessGatewayHelp4 = 16217;
			/// <summary>
			///2、确认手机APP是否连接网关，可在APP进行定位操作，若连接正常，网关系统指示灯会快闪
			/// </summary>
			public const int uAddWirelessGatewayHelp5 = 16218;
			/// <summary>
			///3、AP配网模式：可通过长按HID/WCFG按键 5秒，使网关直
			///接进入建立热点模式，灯光状态变化为按下按键，系统指示灯
			///SYS快闪5秒后，系统指示灯SYS变为常亮模式，此时热点完成
			///建立
			/// </summary>
			public const int uAddWirelessGatewayHelp6 = 16219;
			/// <summary>
			///1、添加网关过程中，局域网账号和密码发送错误，系统重启
			///后，网关一直持续保持正在联网状态（系统指示灯SYS 3秒周
			///期闪烁，灯光偏暗，持续3分钟），随后转成建立网关热点状
			///态（系统指示灯SYS 5秒间隔闪烁，灯光偏亮），此时可手机
			///APP退出至网关添加页面，重新进行网关添加，重新发送账号，
			///密码
			/// </summary>
			public const int uAddWirelessGatewayHelp7 = 16220;
			/// <summary>
			///2、在网关已经连接局域网状态下（系统指示灯SYS 1秒间隔
			///闪烁），手机APP不小心退出了连接界面，可前往添加有线网
			///关界面，直接进行网关连接
			/// </summary>
			public const int uAddWirelessGatewayHelp8 = 16221;
			/// <summary>
			///3、在网关已经连接局域网状态下（系统指示灯SYS 1秒间隔
			///闪烁），手机APP一直连接不上网关，可以先退出APP后台，
			///重新登入进行连接或在有线网关界面直接搜索网关
			/// </summary>
			public const int uAddWirelessGatewayHelp9 = 16222;
			/// <summary>
			///4、WIFI有波动，导致网关联网失败，可重新上电
			/// </summary>
			public const int uAddWirelessGatewayHelp10 = 16223;
			/// <summary>
			/// 1.请确保网关用网线正常连接路由器{0}2.网口指示灯LAN无规律闪烁{0}3.系统指示灯SYS为1秒周期闪烁，灯光偏暗{0}4.手机APP和网关首次连接,请将手机保持在与网关同一个局域网下(WIFI){0}5.进行“下一步”操作
			/// </summary>
			public const int uAddWiredGatewayMsg1 = 16224;
			/// <summary>
			/// 1.上电,系统启动(系统指示灯SYS 7秒后亮起,持续50秒常亮){0}2.网关连接局域网(SYS 3秒周期闪烁,灯光偏暗,持续20秒){0}3.网关建立WI-FI热点(SYS 5秒周期闪烁,灯光变亮){0}4.网关建立热点成功{0}5.点击下一步
			/// </summary>
			public const int uAddWirelessApGatewayMsg1 = 16225;
			/// <summary>
			/// 1.填写路由器的账号和密码{0}2.点击下一步，将路由器账号和密码发送至网关{0}3.网关接收成功,系统指示灯SYS闪烁
			/// </summary>
			public const int uAddWirelessApGatewayMsg2 = 16226;
			/// <summary>
			/// 1.系统重启(SYS 7秒后亮起,持续50秒常亮){0}2.网关正在连接路由器(SYS 3秒周期闪烁,灯光偏暗){0}3.网关连接路由器成功(SYS 1秒周期闪烁,灯光偏暗){0}4.进行手机APP和网关的连接{0}5.首次连接将手机保持在与网关同一个局域网下(WIFI){0}6.点击"{1}"完成手机连接家庭WIFI{0}7.进行"下一步"操作
			/// </summary>
			public const int uAddWirelessApGatewayMsg3 = 16227;
			/// <summary>
			/// 天
			/// </summary>
			public const int uDate1 = 16228;
			/// <summary>
			/// 周
			/// </summary>
			public const int uWeek1 = 16229;
			/// <summary>
			/// 个月
			/// </summary>
			public const int uOneMonth1 = 16230;
			/// <summary>
			/// 发现APP新版本,马上升级{0}开启新体验哦~
			/// </summary>
			public const int uAppUpdateMsg1 = 16231;
			/// <summary>
			/// 发现网关新版本,马上升级{0}开启新体验哦~
			/// </summary>
			public const int uGatewayUpdateMsg1 = 16232;
			/// <summary>
			/// 公告
			/// </summary>
			public const int uNotice = 16233;

			/// <summary>
			/// 人脸
			/// </summary>
			public const int uFace = 16234;

			//★★★★下面这些是接口的返回信息翻译,从18000开始★★★★
			/// <summary>
			@@ -5042,7 +7048,7 @@
			/// </summary>
			public const int ValidatorCode_ValidCodeAndPhoneNoEqual = 18016;
			/// <summary>
			/// 未发送验证码到此账号
			/// 验证码已失效
			/// </summary>
			public const int ValidatorCode_NoRecord = 18017;
			/// <summary>
			@@ -5198,119 +7204,50 @@
			/// </summary>
			public const int uAddRepeaterZigbeeMsg = 21014;
			/// <summary>
			/// 空调 -> 长按图示按键5秒以上，指示灯{0}变绿闪烁,进入配网状态{0}绿灯每5秒闪烁一次则入网成功
			/// 空调 -> 长按编程按键5秒,DATA绿色LED闪烁,{0}频率为亮0.5秒,灭0.5秒
			/// </summary>
			public const int uAddAirConditionerZbGatewayMsg = 21015;
			/// <summary>
			/// Pir传感器 -> 长按图示按键5秒以上，指示灯变绿、{0}闪烁进入配网状态。绿灯熄灭则配网成功
			/// </summary>
			public const int uAddSensorPirMsg = 21016;
			/// <summary>
			/// 温湿度传感器 -> 长按图示按键5秒以上，信号图标{0}快闪，进入配网状态。图标常亮则配网成功
			/// </summary>
			public const int uAddSensorTemperatureAndHumidityMsg = 21017;
			/// <summary>
			/// 单开双控面板 -> 长按BUTTON1按键5秒，所有指示灯{0}变为绿色并闪烁，进入配网状态
			/// </summary>
			public const int uAddFangyueTwoButtonPanelMsg = 21018;
			/// <summary>
			/// 双开四控面板 -> 长按BUTTON1按键5秒，所有指示灯{0}变为绿色并闪烁，进入配网状态
			/// </summary>
			public const int uAddFangyueFourButtonPanelMsg = 21019;
			/// <summary>
			/// 四开八控面板-> 长按BUTTON1按键5秒，所有指示灯{0}变为绿色并闪烁，进入配网状态
			/// </summary>
			public const int uAddFangyueEightButtonPanelMsg = 21020;
			/// <summary>
			/// 方悦环境面板 ->按住面板功能按键5秒，绿色指示灯闪烁{0}进入配网状态；闪烁停止{0}指示灯变白色表示配网成功
			/// </summary>
			public const int uAddFangyueEnvironmentPanelMsg = 21021;
			/// <summary>
			/// 窗帘面板 -> 长按面板左上角按键，所有按键{0}指示灯亮起，则配网成功
			/// </summary>
			public const int uAddCurtaunPanelMsg = 21022;
			/// <summary>
			/// 吸顶燃气传感器 -> 长按图示按键5秒以上，绿色快闪{0}进入配网状态，绿灯常亮则入网成功
			/// </summary>
			public const int uAddSensorCeilingGasMsg = 21023;
			/// <summary>
			/// 球型移动传感器 -> 长按图示按键5秒以上，指示灯变绿、闪烁{0}进入配网状态，绿灯熄灭则配网成功
			/// </summary>
			public const int uAddSensorSphericalMotionMsg = 21024;

			//★★★★下面这些是模块ID的翻译名字,从30000开始★★★★
			/// <summary>
			/// 镜像ID为1305(暂定)的设备的默认名字：紧急按钮
			/// </summary>
			public const int uDeviceModelId1305 = 30000;
			/// <summary>
			/// 镜像ID为1300(暂定)的设备的默认名字：燃气传感器
			/// </summary>
			public const int uDeviceModelId1300 = 30001;
			/// <summary>
			/// 镜像ID为1302(暂定)的设备的默认名字：烟雾传感器
			/// </summary>
			public const int uDeviceModelId1302 = 30002;
			/// <summary>
			/// 镜像ID为1304(暂定)的设备的默认名字：水浸传感器
			/// </summary>
			public const int uDeviceModelId1304 = 30003;
			/// <summary>
			/// 钥匙扣
			/// </summary>
			public const int uKeyfob = 30004;
			/// <summary>
			/// 镜像ID为1301(暂定)的设备的默认名字：门窗传感器
			/// </summary>
			public const int uDeviceModelId1301 = 30005;
			/// <summary>
			/// 镜像ID为4100的设备的默认名字：Zigbee微断云控制器
			/// </summary>
			public const int uDeviceModelId4100 = 30006;
			/// <summary>
			/// 镜像ID为100的设备的默认名字：Zigbee智能开合帘电机
			/// </summary>
			public const int uDeviceModelId100 = 30007;
			/// <summary>
			/// 镜像ID为200的设备的默认名字：4按键多功能触摸面板(带4路继电器底座)
			/// </summary>
			public const int uDeviceModelId200 = 30008;
			/// <summary>
			/// 镜像ID为1200的设备的默认名字：220Pir传感器
			/// </summary>
			public const int uDeviceModelId1200 = 30009;
			/// <summary>
			/// 镜像ID为1的设备的默认名字：1代Zigbee网关(146底盒墙装模式)
			/// </summary>
			public const int uDeviceModelId1 = 30010;
			/// <summary>
			/// 镜像ID为201的设备的默认名字：3按键多功能触摸面板(带3路继电器底座)
			/// </summary>
			public const int uDeviceModelId201 = 30011;
			/// <summary>
			/// 镜像ID为202的设备的默认名字：2按键多功能触摸面板(带2路继电器底座)
			/// </summary>
			public const int uDeviceModelId202 = 30012;
			/// <summary>
			/// 镜像ID为2300的设备的默认名字：3路继电器小模块
			/// </summary>
			public const int uDeviceModelId2300 = 30013;
			/// <summary>
			/// 镜像ID为6的设备的默认名字：1代Zigbee网关(高级网关桌面模式)
			/// </summary>
			public const int uDeviceModelId6 = 30014;
			/// <summary>
			/// 镜像ID为0的设备的默认名字：调试设备
			/// </summary>
			public const int uDeviceModelId0 = 30015;
			/// <summary>
			/// 镜像ID为101的设备的默认名字：Zigbee智能管状电机
			/// </summary>
			public const int uDeviceModelId101 = 30016;
			/// <summary>
			/// 镜像ID为3900的设备的默认名字：中继器
			/// </summary>
			public const int uDeviceModelId3900 = 30017;
			/// <summary>
			/// 镜像ID为203的设备的默认名字：12按键多功能触摸面板(带1路继电器底座)
			/// </summary>
			public const int uDeviceModelId203 = 30018;
			/// <summary>
			/// 镜像ID为210的设备的默认名字：4按键多功能触摸面板(只带电源底座)
			/// </summary>
			public const int uDeviceModelId210 = 30019;
			/// <summary>
			/// 镜像ID为1303(暂定)的设备的默认名字：红外传感器
			/// </summary>
			public const int uDeviceModelId1303 = 30020;
			/// <summary>
			/// 镜像ID为2500的设备的默认名字：1路调光器小模块
			/// </summary>
			public const int uDeviceModelId2500 = 30021;
			/// <summary>
			/// 镜像ID为4200的设备的默认名字：zigbee转buspro协议转换器
			/// </summary>
			public const int uDeviceModelId4200 = 30022;
			/// <summary>
			/// 镜像ID为4201的设备的默认名字：zigbee转485协议转换器
			/// </summary>
			public const int uDeviceModelId4201 = 30023;
			/// <summary>
			/// 镜像ID为3600的设备的默认名字：zigbee空调网关模块
			/// </summary>
			public const int uDeviceModelId3600 = 30024;
			/// <summary>
			/// 镜像ID为2800的设备的默认名字：H06C
			/// </summary>
			public const int uDeviceModelId2800 = 30025;

			//★★★★下面这些是设备所属种类的翻译名字,从40000开始★★★★
			//★★★★下面这些是设备所属种类的翻译名字,从40000开始注：这些所属ID已经不再维护★★★★
			/// <summary>
			/// 自定义设备所属ID为100的翻译名字：窗帘
			/// 自定义设备所属ID为100的翻译名字：遮阳
			/// </summary>
			public const int uDeviceBelongId100 = 40000;
			/// <summary>
			@@ -5318,52 +7255,156 @@
			/// </summary>
			public const int uDeviceBelongId200 = 40001;
			/// <summary>
			/// 自定义设备所属ID为1200的翻译名字：传感器
			/// </summary>
			public const int uDeviceBelongId1200 = 40002;
			/// <summary>
			/// 自定义设备所属ID为2300的翻译名字：继电器
			/// </summary>
			public const int uDeviceBelongId2300 = 40003;
			/// <summary>
			/// 自定义设备所属ID为2500的翻译名字：调光器
			/// </summary>
			public const int uDeviceBelongId2500 = 40004;
			/// <summary>
			/// 自定义设备所属ID为2800的翻译名字：智能门锁
			/// </summary>
			public const int uDeviceBelongId2800 = 40005;
			/// <summary>
			/// 自定义设备所属ID为3600的翻译名字：空调
			/// </summary>
			public const int uDeviceBelongId3600 = 40006;
			/// <summary>
			/// 自定义设备所属ID为3900的翻译名字：中继器
			/// 自定义设备所属ID为13的翻译名字：开关
			/// </summary>
			public const int uDeviceBelongId3900 = 40007;
			public const int uDeviceBelongId13 = 40014;
			/// <summary>
			/// 自定义设备所属ID为4100的翻译名字：空气开关
			/// 自定义设备所属ID为14的翻译名字：插座
			/// </summary>
			public const int uDeviceBelongId4100 = 40008;
			public const int uDeviceBelongId14 = 40015;
			/// <summary>
			/// 自定义设备所属ID为4200的翻译名字：转换器
			/// 自定义设备所属ID为15的翻译名字：灯光
			/// </summary>
			public const int uDeviceBelongId4200 = 40009;
			/// <summary>
			/// 自定义设备所属ID为9的翻译名字：彩灯
			/// </summary>
			public const int uDeviceBelongId9 = 40010;
			/// <summary>
			/// 自定义设备所属ID为10的翻译名字：温湿度传感器
			/// </summary>
			public const int uDeviceBelongId10 = 40011;
			/// <summary>
			/// 自定义设备所属ID为10的翻译名字：温度传感器
			/// </summary>
			public const int uDeviceBelongId11 = 40012;
			/// <summary>
			/// 自定义设备所属ID为10的翻译名字：湿度传感器
			/// </summary>
			public const int uDeviceBelongId12 = 40013;
			public const int uDeviceBelongId15 = 40016;
			/// <summary>
			/// 自定义设备所属ID为2310的翻译名字：新风
			/// </summary>
			public const int uDeviceBelongId2310 = 40018;


			//★★★★下面这些是添加新设备界面那里显示的名字,从70000开始★★★★
			/// <summary>
			/// 2按键面板
			/// </summary>
			public const int uDeviceDirectionName1 = 70000;
			/// <summary>
			/// 3按键面板
			/// </summary>
			public const int uDeviceDirectionName2 = 70001;
			/// <summary>
			/// 4按键面板
			/// </summary>
			public const int uDeviceDirectionName3 = 70002;
			/// <summary>
			/// 方悦单开双控面板
			/// </summary>
			public const int uDeviceDirectionName4 = 70003;
			/// <summary>
			/// 方悦双开四控面板
			/// </summary>
			public const int uDeviceDirectionName5 = 70004;
			/// <summary>
			/// 方悦四开八控面板
			/// </summary>
			public const int uDeviceDirectionName6 = 70005;
			/// <summary>
			/// 方悦新风小模块
			/// </summary>
			public const int uDeviceDirectionName7 = 70006;
			/// <summary>
			/// 方悦新风面板
			/// </summary>
			public const int uDeviceDirectionName8 = 70007;
			/// <summary>
			/// 方悦环境面板
			/// </summary>
			public const int uDeviceDirectionName9 = 70008;
			/// <summary>
			/// 窗帘面板
			/// </summary>
			public const int uDeviceDirectionName10 = 70009;
			/// <summary>
			/// 3路继电器
			/// </summary>
			public const int uDeviceDirectionName11 = 70010;
			/// <summary>
			/// 1路调光器
			/// </summary>
			public const int uDeviceDirectionName12 = 70011;
			/// <summary>
			/// 窗帘电机
			/// </summary>
			public const int uDeviceDirectionName13 = 70012;
			/// <summary>
			/// 卷帘电机
			/// </summary>
			public const int uDeviceDirectionName14 = 70013;
			/// <summary>
			/// 空调网关
			/// </summary>
			public const int uDeviceDirectionName15 = 70014;
			/// <summary>
			/// 门锁
			/// </summary>
			public const int uDeviceDirectionName16 = 70015;
			/// <summary>
			/// PIR传感器
			/// </summary>
			public const int uDeviceDirectionName17 = 70016;
			/// <summary>
			/// 红外传感器
			/// </summary>
			public const int uDeviceDirectionName18 = 70017;
			/// <summary>
			/// 燃气传感器
			/// </summary>
			public const int uDeviceDirectionName19 = 70018;
			/// <summary>
			/// 烟雾传感器
			/// </summary>
			public const int uDeviceDirectionName20 = 70019;
			/// <summary>
			/// 水浸传感器
			/// </summary>
			public const int uDeviceDirectionName21 = 70020;
			/// <summary>
			/// 门窗传感器
			/// </summary>
			public const int uDeviceDirectionName22 = 70021;
			/// <summary>
			/// 温湿度传感器
			/// </summary>
			public const int uDeviceDirectionName23 = 70022;
			/// <summary>
			/// 中继器
			/// </summary>
			public const int uDeviceDirectionName24 = 70023;
			/// <summary>
			/// 智能空开
			/// </summary>
			public const int uDeviceDirectionName25 = 70024;
			/// <summary>
			/// 吸顶燃气传感器
			/// </summary>
			public const int uDeviceDirectionName26 = 70025;
			/// <summary>
			/// PM2.5空气质量传感器
			/// </summary>
			public const int uDeviceDirectionName27 = 70026;
			/// <summary>
			/// 简约多功能面板
			/// </summary>
			public const int uDeviceDirectionName28 = 70027;
			/// <summary>
			/// 简约环境面板
			/// </summary>
			public const int uDeviceDirectionName29 = 70028;
			/// <summary>
			/// 球型移动传感器
			/// </summary>
			public const int uDeviceDirectionName30 = 70029;
			/// <summary>
			/// 晾衣架
			/// </summary>
			public const int uDeviceDirectionName31 = 70030;
			/// <summary>
			/// 空气质量传感器
			/// </summary>
			public const int uDeviceDirectionName32 = 70031;

			}
			}