Merge remote-tracking branch 'origin/wjc' into Dev-Branch

wxr

2022-04-21 df93e50c747a585aa3acad599ba9be7d9617872d

Merge remote-tracking branch 'origin/wjc' into Dev-Branch

 HDL-ON_Android/Assets/Language.ini

@@ -1036,6 +1036,10 @@
7152=Leave or arrive at a place
7153=Leave
7154=Arrive
7155=Distress/Normal
7156=Distress





@@ -2166,7 +2170,8 @@
7152=离开或到达某地
7153=离开
7154=到达

7155=求救/正常
7156=求救


 

 HDL-ON_iOS/Resources/Language.ini

@@ -1036,6 +1036,8 @@
7152=Leave or arrive at a place
7153=Leave
7154=Arrive
7155=Distress/Normal
7156=Distress



@@ -2165,6 +2167,8 @@
7152=离开或到达某地
7153=离开
7154=到达
7155=求救/正常
7156=求救




 HDL_ON/Common/R.cs

@@ -2732,7 +2732,14 @@
        /// 到达
        /// </summary>
        public const int daoda = 7154;

        /// <summary>
        /// 求救/正常
        /// </summary>
        public const int qiujiuandzhengchang = 7155;
        /// <summary>
        /// 求救
        /// </summary>
        public const int qiujiu = 7156;


        #region LE新增

 HDL_ON/UI/UI2/3-Intelligence/Automation/ConditionDeviceFunList.cs

@@ -86,6 +86,22 @@
                        }
                    }
                    break;
                //紧急呼叫
                case SPK.SensorHelp:
                    {
                        LogicView.FunTypeView view = new LogicView.FunTypeView();
                        view.btnText.TextID = StringId.qiujiuandzhengchang;
                        fLayout.AddChidren(view.FLayoutView());
                        view.btnClick.MouseUpEventHandler += (sender, e) =>
                        {
                            DeviceView(device, view.btnState, StringId.qiujiu, StringId.zhengchang);
                        };
                        if (edit)
                        {
                            GetEditState(device, index, view.btnState, null, null, null);
                        }
                    }
                    break;
                //水浸传感器
                case SPK.SensorWater:
                    {
@@ -482,6 +498,7 @@
                    case SPK.SensorGas:
                    case SPK.SensorWater:
                    case SPK.SensorSmoke:
                    case SPK.SensorHelp:
                        {
                            keyVlaue = "status";
                            if (!Is_SpkAttribute(keyVlaue)) {

 HDL_ON/UI/UI2/3-Intelligence/Automation/InpOrOutLogicMethod.cs

@@ -176,6 +176,23 @@
                                    }
                                    break;
                                //传感器
                                case SPK.SensorHelp:
                                    {
                                        foreach (var dic in dicList)
                                        {
                                            string value = dic["value"];
                                            if (value == "alarm")
                                            {
                                                inputView.btnState.Text = Language.StringByID(StringId.qiujiu);

                                            }
                                            else
                                            {
                                                inputView.btnState.Text = Language.StringByID(StringId.zhengchang);
                                            }
                                        }
                                    }
                                    break;
                                case SPK.SensorSmoke:
                                case SPK.SensorGas:
                                    {
@@ -1810,6 +1827,22 @@

                    }
                    break;
                case SPK.SensorHelp:
                    {
                        foreach (var dic in dicList)
                        {
                            string value = dic["value"];
                            if (value == "alarm")
                            {
                                button1.Text = Language.StringByID(StringId.qiujiu);
                            }
                            else
                            {
                                button1.Text = Language.StringByID(StringId.zhengchang);
                            }
                        }
                    }
                    break;
                case SPK.SensorGas:
                case SPK.SensorSmoke:
                    {

 HDL_ON/UI/UI2/3-Intelligence/Automation/LogicMethod.cs

@@ -6,497 +6,499 @@
namespace HDL_ON.UI.UI2.Intelligence.Automation
{

  public class LogicMethod
  {
    /// <summary>
    /// 定义一个静态对象
    /// </summary>
    private static LogicMethod logicMethod = null;
    /// <summary>
    /// 获取静态对象
    /// </summary>
    public static LogicMethod CurrLogicMethod
    public class LogicMethod
    {
      get
      {
        if (logicMethod == null)
        /// <summary>
        /// 定义一个静态对象
        /// </summary>
        private static LogicMethod logicMethod = null;
        /// <summary>
        /// 获取静态对象
        /// </summary>
        public static LogicMethod CurrLogicMethod
        {
          return new LogicMethod();
            get
            {
                if (logicMethod == null)
                {
                    return new LogicMethod();
                }
                return logicMethod;
            }

        }
        return logicMethod;
      }

    }
        /// <summary>
        /// 表示是条件
        /// </summary>
        public const string condition_if = "条件";
        /// <summary>
        /// 表示是目标
        /// </summary>
        public const string target_if = "目标";
        /// <summary>
        /// 移除所有"Logic"界面
        /// </summary>
        public void RemoveAllView()
        {
            MainPage.BasePageView.RemoveViewByTag("Logic");
        }

    /// <summary>
    /// 表示是条件
    /// </summary>
    public const string condition_if = "条件";
    /// <summary>
    /// 表示是目标
    /// </summary>
    public const string target_if = "目标";
    /// <summary>
    /// 移除所有"Logic"界面
    /// </summary>
    public void RemoveAllView()
    {
      MainPage.BasePageView.RemoveViewByTag("Logic");
    }
        /// <summary> Converts an array of bytes into a formatted string of hex digits (ex: E4 CA B2)</summary>
        /// <param name="data"> The array of bytes to be translated into a string of hex digits. </param>
        /// <returns> Returns a well formatted string of hex digits with spacing. </returns>
        public string byteArrayToHexString(byte[] data)
        {
            System.Text.StringBuilder sb = new System.Text.StringBuilder();
            foreach (byte b in data)
            {
                sb.Append(Convert.ToString(b, 16).PadLeft(2, '0'));
            }

    /// <summary> Converts an array of bytes into a formatted string of hex digits (ex: E4 CA B2)</summary>
    /// <param name="data"> The array of bytes to be translated into a string of hex digits. </param>
    /// <returns> Returns a well formatted string of hex digits with spacing. </returns>
    public string byteArrayToHexString(byte[] data)
    {
      System.Text.StringBuilder sb = new System.Text.StringBuilder();
      foreach (byte b in data)
      {
        sb.Append(Convert.ToString(b, 16).PadLeft(2, '0'));
      }
            return sb.ToString().ToUpper();
        }

      return sb.ToString().ToUpper();
    }

    /**
* int转byte[]
* 该方法将一个int类型的数据转换为byte[]形式，因为int为32bit，而byte为8bit所以在进行类型转换时，知会获取低8位，
* 丢弃高24位。通过位移的方式，将32bit的数据转换成4个8bit的数据。注意 &0xff，在这当中，&0xff简单理解为一把剪刀，
* 将想要获取的8位数据截取出来。
* @param i 一个int数字
* @return byte[]
        /**
    * int转byte[]
    * 该方法将一个int类型的数据转换为byte[]形式，因为int为32bit，而byte为8bit所以在进行类型转换时，知会获取低8位，
    * 丢弃高24位。通过位移的方式，将32bit的数据转换成4个8bit的数据。注意 &0xff，在这当中，&0xff简单理解为一把剪刀，
    * 将想要获取的8位数据截取出来。
    * @param i 一个int数字
    * @return byte[]
*/
    public byte[] int2ByteArray(int i)
    {
      byte[] result = new byte[4];
      result[0] = (byte)((i >> 24) & 0xFF);
      result[1] = (byte)((i >> 16) & 0xFF);
      result[2] = (byte)((i >> 8) & 0xFF);
      result[3] = (byte)(i & 0xFF);
      return result;
    }
    /// <summary>
    /// 获取时间戳
    /// </summary>
    /// <returns></returns>
    public int getTimeStamp()
    {
      TimeSpan ts = DateTime.UtcNow - new DateTime(1970, 1, 1, 0, 0, 0, 0);
      return (int)ts.TotalSeconds;
    }
    /// <summary>
    /// 生成逻辑sid方法
    /// </summary>
    public string NewSid()
    {
      string logicId = "";
      try
      {
        string sOidBeginsWith = "000101";//厂商 + 通讯方式
        DateTime dt = DateTime.Now;
        DateTime startTime = TimeZoneInfo.ConvertTimeToUtc(new DateTime(2020, 1, 1));
        long m = (long)((dt - startTime).TotalMilliseconds / 10);
        string sTimeSpan = byteArrayToHexString(int2ByteArray(getTimeStamp()));



        logicId = sOidBeginsWith + sTimeSpan;

        logicId += "15";
        logicId += "1501";
        //1501 物模型为逻辑， 0001 表示 1 号逻辑功能
        int maxId = 1;


        for (int i = 0; i < Logic.LogicList.Count; i++)
        public byte[] int2ByteArray(int i)
        {
          string s = Logic.LogicList[i].sid.Substring(20, 4);
          int iThisSceneId = Convert.ToInt16(s, 16);
          if (iThisSceneId > maxId)
            maxId = iThisSceneId;
            byte[] result = new byte[4];
            result[0] = (byte)((i >> 24) & 0xFF);
            result[1] = (byte)((i >> 16) & 0xFF);
            result[2] = (byte)((i >> 8) & 0xFF);
            result[3] = (byte)(i & 0xFF);
            return result;
        }
        /// <summary>
        /// 获取时间戳
        /// </summary>
        /// <returns></returns>
        public int getTimeStamp()
        {
            TimeSpan ts = DateTime.UtcNow - new DateTime(1970, 1, 1, 0, 0, 0, 0);
            return (int)ts.TotalSeconds;
        }
        /// <summary>
        /// 生成逻辑sid方法
        /// </summary>
        public string NewSid()
        {
            string logicId = "";
            try
            {
                string sOidBeginsWith = "000101";//厂商 + 通讯方式
                DateTime dt = DateTime.Now;
                DateTime startTime = TimeZoneInfo.ConvertTimeToUtc(new DateTime(2020, 1, 1));
                long m = (long)((dt - startTime).TotalMilliseconds / 10);
                string sTimeSpan = byteArrayToHexString(int2ByteArray(getTimeStamp()));



                logicId = sOidBeginsWith + sTimeSpan;

                logicId += "15";
                logicId += "1501";
                //1501 物模型为逻辑， 0001 表示 1 号逻辑功能
                int maxId = 1;


                for (int i = 0; i < Logic.LogicList.Count; i++)
                {
                    string s = Logic.LogicList[i].sid.Substring(20, 4);
                    int iThisSceneId = Convert.ToInt16(s, 16);
                    if (iThisSceneId > maxId)
                        maxId = iThisSceneId;
                }

                logicId += (maxId + 1).ToString("X4");//逻辑号 两个byte 
                logicId += "0000";
            }
            catch
            {
                return logicId;
            }
            return logicId;
        }
        /// <summary>
        /// 封装Dictionary对象
        /// </summary>
        /// <param name="dic">Dictionary类</param>
        /// <param name="key">健</param>
        /// <param name="value">值</param>
        public void dictionary(Dictionary<string, string> dic, string key, string value)
        {
            if (dic.ContainsKey(key)) //判断是否存在键值
            {
                //键存在移除
                dic.Remove(key);
            }
            //添加键值
            dic.Add(key, value);
        }
        /// <summary>
        /// 获取网关房间列表
        /// </summary>
        /// <returns></returns>
        public List<HDL_ON.Entity.Room> GetGatewayRoomList()
        {
            return HDL_ON.Entity.SpatialInfo.CurrentSpatial.RoomList;
        }
        /// <summary>
        /// 获取网关房间列表
        /// </summary>
        /// <returns></returns>
        public List<HDL_ON.Entity.Room> GetGatewayRoomList(string name)
        {
            List<Entity.Room> roomList = new List<Entity.Room>();
            Entity.Room room1 = new Entity.Room();
            room1.roomName = name;//自定义默认一个房间名为:6688
            room1.roomId = "6688";//自定义默认id用识别该房间
            roomList.Add(room1);//默认添加到房间列表里
            var roomLists = GetGatewayRoomList();
            for (int i = 0; i < roomLists.Count; i++)
            {
                var room = roomLists[i];
                var devlist = GetRoomDevice(room);
                if (devlist.Count == 0)
                {
                    //过滤掉没有设备的房间;
                    continue;
                }
                roomList.Add(room);
            }
            return roomList;
        }
        /// <summary>
        /// 获取网关设备列表
        /// </summary>
        /// <returns></returns>
        public List<HDL_ON.Entity.Function> GetGatewayDeviceList()
        {
            return Entity.FunctionList.List.GetDeviceFunctionList();
        }
        /// <summary>
        /// 获取场景列表
        /// </summary>
        /// <returns></returns>
        public List<HDL_ON.Entity.Scene> GetSceneList()
        {
            return HDL_ON.Entity.FunctionList.List.scenes;
        }

        logicId += (maxId + 1).ToString("X4");//逻辑号 两个byte 
        logicId += "0000";
      }
      catch
      {
        return logicId;
      }
      return logicId;
    }
    /// <summary>
    /// 封装Dictionary对象
    /// </summary>
    /// <param name="dic">Dictionary类</param>
    /// <param name="key">健</param>
    /// <param name="value">值</param>
    public void dictionary(Dictionary<string, string> dic, string key, string value)
    {
      if (dic.ContainsKey(key)) //判断是否存在键值
      {
        //键存在移除
        dic.Remove(key);
      }
      //添加键值
      dic.Add(key, value);
    }
    /// <summary>
    /// 获取网关房间列表
    /// </summary>
    /// <returns></returns>
    public List<HDL_ON.Entity.Room> GetGatewayRoomList()
    {
      return HDL_ON.Entity.SpatialInfo.CurrentSpatial.RoomList;
    }
    /// <summary>
    /// 获取网关房间列表
    /// </summary>
    /// <returns></returns>
    public List<HDL_ON.Entity.Room> GetGatewayRoomList(string name)
    {
      List<Entity.Room> roomList = new List<Entity.Room>();
      Entity.Room room1 = new Entity.Room();
      room1.roomName = name;//自定义默认一个房间名为:6688
      room1.roomId = "6688";//自定义默认id用识别该房间
      roomList.Add(room1);//默认添加到房间列表里
      var roomLists = GetGatewayRoomList();
      for (int i = 0; i < roomLists.Count; i++)
      {
        var room = roomLists[i];
        var devlist = GetRoomDevice(room);
        if (devlist.Count == 0)
        /// <summary>
        /// 获取安防列表
        /// </summary>
        /// <returns></returns>
        public List<HDL_ON.Entity.SecurityAlarm> GetSecurityList()
        {
          //过滤掉没有设备的房间;
          continue;
            return FunctionList.List.securities;
        }
        roomList.Add(room);
      }
      return roomList;
    }
    /// <summary>
    /// 获取网关设备列表
    /// </summary>
    /// <returns></returns>
    public List<HDL_ON.Entity.Function> GetGatewayDeviceList()
    {
      return Entity.FunctionList.List.GetDeviceFunctionList();
    }
    /// <summary>
    /// 获取场景列表
    /// </summary>
    /// <returns></returns>
    public List<HDL_ON.Entity.Scene> GetSceneList()
    {
      return HDL_ON.Entity.FunctionList.List.scenes;
    }

    /// <summary>
    /// 获取安防列表
    /// </summary>
    /// <returns></returns>
    public List<HDL_ON.Entity.SecurityAlarm> GetSecurityList()
    {
      return FunctionList.List.securities;
    }
    /// <summary>
    /// 获取房间的设备列表
    /// </summary>
    /// <param name="room">当前房间</param>
    /// <returns></returns>
    public List<HDL_ON.Entity.Function> GetRoomDevice(HDL_ON.Entity.Room room)
    {
      List<HDL_ON.Entity.Function> deviceLists = new List<Entity.Function>();
      List<HDL_ON.Entity.Function> lists = GetGatewayDeviceList();
      if (room.roomId == "6688")
      {
        //默认一个房间名：6688
        //显示网关全部设备
        deviceLists = lists;
      }
      else
      {
        for (int i = 0; i < lists.Count; i++)
        /// <summary>
        /// 获取房间的设备列表
        /// </summary>
        /// <param name="room">当前房间</param>
        /// <returns></returns>
        public List<HDL_ON.Entity.Function> GetRoomDevice(HDL_ON.Entity.Room room)
        {
          var dev = lists[i];
          if (dev.roomIds.Find((id) => id == room.roomId) != null)
          {
            //添加属于这个房间的设备;
            deviceLists.Add(dev);
          }
            List<HDL_ON.Entity.Function> deviceLists = new List<Entity.Function>();
            List<HDL_ON.Entity.Function> lists = GetGatewayDeviceList();
            if (room.roomId == "6688")
            {
                //默认一个房间名：6688
                //显示网关全部设备
                deviceLists = lists;
            }
            else
            {
                for (int i = 0; i < lists.Count; i++)
                {
                    var dev = lists[i];
                    if (dev.roomIds.Find((id) => id == room.roomId) != null)
                    {
                        //添加属于这个房间的设备;
                        deviceLists.Add(dev);
                    }

                }
            }
            return deviceLists;
        }
        /// <summary>
        /// 获取设备（功能）对象
        /// </summary>
        /// <param name="sid">设备唯一标识</param>
        /// <returns></returns>
        public HDL_ON.Entity.Function GetDevice(string sid)
        {
            HDL_ON.Entity.Function device = new Entity.Function() { name = "Unknown" };
            List<HDL_ON.Entity.Function> deviceLists = GetGatewayDeviceList();
            for (int i = 0; i < deviceLists.Count; i++)
            {
                var dev = deviceLists[i];
                if (dev.sid == sid)
                {
                    device = dev;
                    break;
                }
            }
            return device;
        }

        /// <summary>
        /// 获取场景对象
        /// </summary>
        /// <param name="sid">场景唯一标识</param>
        /// <returns></returns>
        public HDL_ON.Entity.Scene GetSecne(string sid)
        {
            HDL_ON.Entity.Scene scene = new Entity.Scene() { name = "Unknown" };
            List<HDL_ON.Entity.Scene> sceneLists = GetSceneList();
            for (int i = 0; i < sceneLists.Count; i++)
            {
                var sce = sceneLists[i];
                if (sce.sid == sid)
                {
                    scene = sce;
                    break;
                }
            }
            return scene;
        }
        /// <summary>
        /// 获取安防对象
        /// </summary>
        /// <param name="sid">安防唯一标识</param>
        /// <returns></returns>
        public HDL_ON.Entity.SecurityAlarm GetSecurity(string sid)
        {
            HDL_ON.Entity.SecurityAlarm security = new Entity.SecurityAlarm() { name = "Unknown" };
            List<HDL_ON.Entity.SecurityAlarm> SecurityLists = GetSecurityList();
            for (int i = 0; i < SecurityLists.Count; i++)
            {
                var sce = SecurityLists[i];
                if (sce.sid == sid)
                {
                    security = sce;
                    break;
                }
            }
            return security;
        }
        /// <summary>
        /// 获取房间名(即是=区域名称)
        /// </summary>
        /// <param name="device">设备</param>
        /// <returns></returns>
        public string GetGetRoomName(HDL_ON.Entity.Function device)
        {
            string roomName = "";
            List<HDL_ON.Entity.Room> roomLists = GetGatewayRoomList();
            for (int i = 0; i < device.roomIds.Count; i++)
            {
                var dev = device.roomIds[i];
                var room = roomLists.Find((c) => c.roomId == dev);
                if (room != null)
                {
                    roomName += room.floorName + "." + room.roomName + ",";
                }
            }

            return roomName.TrimEnd(',');
        }
        #region   动一改四
        /// <summary>
        /// 获取设备类型图标
        /// </summary>
        /// <param name="functionType">设备类型</param>
        /// <returns></returns>
        public string GetIconPath(string functionType)
        {
            string strPath = "";
            switch (functionType)
            {

                case SPK.AirSwitch:
                    {
                        strPath = "FunctionIcon/Icon/electricalbreaker.png";
                    }
                    break;
                case SPK.PanelSocket:
                case SPK.ElectricSocket:
                    {
                        strPath = "FunctionIcon/Icon/electricalsocket.png";
                    }
                    break;
                case SPK.LightSwitch:
                case SPK.LightRGB:
                case SPK.LightRGBW:
                case SPK.LightCCT:
                case SPK.LightDimming:
                    {
                        strPath = "LogicIcon/lightloguc.png";
                    }
                    break;
                case SPK.CurtainSwitch:
                case SPK.CurtainRoller:
                case SPK.CurtainTrietex:
                    {
                        strPath = "LogicIcon/curtainlogic.png";
                    }
                    break;
                case SPK.AcStandard:
                case SPK.HvacAC:
                    {
                        strPath = "LogicIcon/airconditionerlogic.png";
                    }
                    break;
                case SPK.HvacCac:
                    strPath = "FunctionIcon/Icon/hvaccac.png";
                    break;
                case SPK.FloorHeatStandard:
                case SPK.HvacFloorHeat:
                    {
                        strPath = "LogicIcon/heatlogic.png";
                    }
                    break;
                case SPK.AirFreshStandard:
                case SPK.HvacAirFresh:
                    {
                        strPath = "LogicIcon/heatlogic.png";
                    }
                    break;
                case SPK.SensorSmoke:
                case SPK.SensorWater:
                case SPK.SensorGas:
                case SPK.SensorDryContact:
                case SPK.SensorDryContact2:
                case SPK.SensorShanLan:
                case SPK.SensorDuiShe:
                case SPK.SensorPir:
                case SPK.SensorDoorWindow:
                case SPK.SensorUtrasonic:
                case SPK.SenesorMegahealth:
                case SPK.SenesorMegahealth2:
                case SPK.SensorEnvironment:
                case SPK.SensorEnvironment2:
                case SPK.SensorEnvironment3:
                case SPK.SensorTemperature:
                case SPK.SensorHumidity:
                case SPK.SensorCO2:
                case SPK.SensorPm25:
                case SPK.SensorTVOC:
                case SPK.SensorHcho:
                case SPK.SensorHelp:
                    {
                        strPath = "LogicIcon/sensor.png";
                    }
                    break;

            }
            return strPath;
        }
        /// <summary>
        /// 设备类型的列表(灯光类，窗帘类。。。)
        /// </summary>
        /// <param name="deviceList">设备列表</param>
        /// <returns></returns>
        public List<string> GetDeviceTypeList(List<HDL_ON.Entity.Function> deviceList)
        {
            List<string> deviceStrTypeList = new List<string>();
            deviceStrTypeList.Clear();
            ///灯光类
            var lightjosn = deviceList.Find((device) =>
            device.spk == SPK.LightSwitch
            || device.spk == SPK.LightDimming
            || device.spk == SPK.LightCCT
            || device.spk == SPK.LightRGB
            || device.spk == SPK.LightRGBW
            );
            if (lightjosn != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.Lights));
            }

            ///窗帘类
            var curtainjosn = deviceList.Find((device) =>
            device.spk == SPK.CurtainSwitch
            || device.spk == SPK.CurtainTrietex
            || device.spk == SPK.CurtainRoller);
            if (curtainjosn != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.Curtain));
            }
            ///空调类
            var ac = deviceList.Find((device) => device.spk == SPK.AcStandard || device.spk == SPK.HvacAC);
            if (ac != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.AC));
            }
            ///地暖类
            var floorHeating = deviceList.Find((device) => device.spk == SPK.FloorHeatStandard || device.spk == SPK.HvacFloorHeat);
            if (floorHeating != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.FloorHeating));
            }
            ///新风类
            var airFresh = deviceList.Find((device) => device.spk == SPK.AirFreshStandard || device.spk == SPK.HvacAirFresh);
            if (airFresh != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.AirFresh));
            }
            ///传感器类
            var sensor = deviceList.Find((device) =>
            device.spk == SPK.SensorWater
            || device.spk == SPK.SensorGas
            || device.spk == SPK.SensorSmoke
            || device.spk == SPK.SensorDryContact || device.spk == SPK.SensorDryContact2
            || device.spk == SPK.SensorShanLan
            || device.spk == SPK.SensorDuiShe
            || device.spk == SPK.SensorPir
            || device.spk == SPK.SensorDoorWindow
            || device.spk == SPK.SensorUtrasonic
            || device.spk == SPK.SenesorMegahealth
            || device.spk == SPK.SenesorMegahealth2
            || device.spk == SPK.SensorEnvironment
             || device.spk == SPK.SensorEnvironment2
              || device.spk == SPK.SensorEnvironment3
                || device.spk == SPK.SensorTemperature
                  || device.spk == SPK.SensorHumidity
                    || device.spk == SPK.SensorCO2
                      || device.spk == SPK.SensorPm25
                        || device.spk == SPK.SensorTVOC
                          || device.spk == SPK.SensorHcho
                          || device.spk == SPK.SensorHelp
            );
            if (sensor != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.Sensor));
            }
            ///家电类
            var electric = deviceList.Find((device) =>
            device.spk == SPK.AirSwitch
            || device.spk == SPK.PanelSocket
            || device.spk == SPK.ElectricSocket
            );
            if (electric != null)
            {
                deviceStrTypeList.Add(Language.StringByID(StringId.Electric));
            }
            return deviceStrTypeList;

        }
      }
      return deviceLists;
    }
    /// <summary>
    /// 获取设备（功能）对象
    /// </summary>
    /// <param name="sid">设备唯一标识</param>
    /// <returns></returns>
    public HDL_ON.Entity.Function GetDevice(string sid)
    {
      HDL_ON.Entity.Function device = new Entity.Function() { name = "Unknown" };
      List<HDL_ON.Entity.Function> deviceLists = GetGatewayDeviceList();
      for (int i = 0; i < deviceLists.Count; i++)
      {
        var dev = deviceLists[i];
        if (dev.sid == sid)
        /// <summary>
        /// 设备类型FunctionType列表
        /// </summary>
        /// <param name="deviceType">设备类型(灯光类，窗帘类。)</param>
        /// <returns></returns>
        public List<string> GetDeviceTypeFunctionList(string deviceType)
        {
          device = dev;
          break;
        }
      }
      return device;
    }

    /// <summary>
    /// 获取场景对象
    /// </summary>
    /// <param name="sid">场景唯一标识</param>
    /// <returns></returns>
    public HDL_ON.Entity.Scene GetSecne(string sid)
    {
      HDL_ON.Entity.Scene scene = new Entity.Scene() { name = "Unknown" };
      List<HDL_ON.Entity.Scene> sceneLists = GetSceneList();
      for (int i = 0; i < sceneLists.Count; i++)
      {
        var sce = sceneLists[i];
        if (sce.sid == sid)
        {
          scene = sce;
          break;
        }
      }
      return scene;
    }
    /// <summary>
    /// 获取安防对象
    /// </summary>
    /// <param name="sid">安防唯一标识</param>
    /// <returns></returns>
    public HDL_ON.Entity.SecurityAlarm GetSecurity(string sid)
    {
      HDL_ON.Entity.SecurityAlarm security = new Entity.SecurityAlarm() { name = "Unknown" };
      List<HDL_ON.Entity.SecurityAlarm> SecurityLists = GetSecurityList();
      for (int i = 0; i < SecurityLists.Count; i++)
      {
        var sce = SecurityLists[i];
        if (sce.sid == sid)
        {
          security = sce;
          break;
        }
      }
      return security;
    }
    /// <summary>
    /// 获取房间名(即是=区域名称)
    /// </summary>
    /// <param name="device">设备</param>
    /// <returns></returns>
    public string GetGetRoomName(HDL_ON.Entity.Function device)
    {
      string roomName = "";
      List<HDL_ON.Entity.Room> roomLists = GetGatewayRoomList();
      for (int i = 0; i < device.roomIds.Count; i++)
      {
        var dev = device.roomIds[i];
        var room = roomLists.Find((c) => c.roomId == dev);
        if (room != null)
        {
          roomName += room.floorName + "." + room.roomName + ",";
        }
      }

      return roomName.TrimEnd(',');
    }
    #region   动一改四
    /// <summary>
    /// 获取设备类型图标
    /// </summary>
    /// <param name="functionType">设备类型</param>
    /// <returns></returns>
    public string GetIconPath(string functionType)
    {
      string strPath = "";
      switch (functionType)
      {

        case SPK.AirSwitch:
          {
            strPath = "FunctionIcon/Icon/electricalbreaker.png";
          }
          break;
        case SPK.PanelSocket:
        case SPK.ElectricSocket:
          {
            strPath = "FunctionIcon/Icon/electricalsocket.png";
          }
          break;
        case SPK.LightSwitch:
        case SPK.LightRGB:
        case SPK.LightRGBW:
        case SPK.LightCCT:
        case SPK.LightDimming:
          {
            strPath = "LogicIcon/lightloguc.png";
          }
          break;
        case SPK.CurtainSwitch:
        case SPK.CurtainRoller:
        case SPK.CurtainTrietex:
          {
            strPath = "LogicIcon/curtainlogic.png";
          }
          break;
        case SPK.AcStandard:
        case SPK.HvacAC:
          {
            strPath = "LogicIcon/airconditionerlogic.png";
          }
          break;
        case SPK.HvacCac:
            strPath = "FunctionIcon/Icon/hvaccac.png";
            break;
        case SPK.FloorHeatStandard:
        case SPK.HvacFloorHeat:
          {
            strPath = "LogicIcon/heatlogic.png";
          }
          break;
        case SPK.AirFreshStandard:
        case SPK.HvacAirFresh:
          {
            strPath = "LogicIcon/heatlogic.png";
          }
          break;
        case SPK.SensorSmoke:
        case SPK.SensorWater:
        case SPK.SensorGas:
        case SPK.SensorDryContact:
        case SPK.SensorDryContact2:
        case SPK.SensorShanLan:
        case SPK.SensorDuiShe:
        case SPK.SensorPir:
        case SPK.SensorDoorWindow:
        case SPK.SensorUtrasonic:
        case SPK.SenesorMegahealth:
        case SPK.SenesorMegahealth2:
        case SPK.SensorEnvironment:
        case SPK.SensorEnvironment2:
        case SPK.SensorEnvironment3:
        case SPK.SensorTemperature:
        case SPK.SensorHumidity:
        case SPK.SensorCO2:
        case SPK.SensorPm25:
        case SPK.SensorTVOC:
        case SPK.SensorHcho:
          {
            strPath = "LogicIcon/sensor.png";
          }
          break;

      }
      return strPath;
    }
    /// <summary>
    /// 设备类型的列表(灯光类，窗帘类。。。)
    /// </summary>
    /// <param name="deviceList">设备列表</param>
    /// <returns></returns>
    public List<string> GetDeviceTypeList(List<HDL_ON.Entity.Function> deviceList)
    {
      List<string> deviceStrTypeList = new List<string>();
      deviceStrTypeList.Clear();
      ///灯光类
      var lightjosn = deviceList.Find((device) =>
      device.spk == SPK.LightSwitch
      || device.spk == SPK.LightDimming
      || device.spk == SPK.LightCCT
      || device.spk == SPK.LightRGB
      || device.spk == SPK.LightRGBW
      );
      if (lightjosn != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.Lights));
      }

      ///窗帘类
      var curtainjosn = deviceList.Find((device) =>
      device.spk == SPK.CurtainSwitch
      || device.spk == SPK.CurtainTrietex
      || device.spk == SPK.CurtainRoller);
      if (curtainjosn != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.Curtain));
      }
      ///空调类
      var ac = deviceList.Find((device) => device.spk == SPK.AcStandard || device.spk == SPK.HvacAC);
      if (ac != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.AC));
      }
      ///地暖类
      var floorHeating = deviceList.Find((device) => device.spk == SPK.FloorHeatStandard || device.spk == SPK.HvacFloorHeat);
      if (floorHeating != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.FloorHeating));
      }
      ///新风类
      var airFresh = deviceList.Find((device) => device.spk == SPK.AirFreshStandard || device.spk == SPK.HvacAirFresh);
      if (airFresh != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.AirFresh));
      }
      ///传感器类
      var sensor = deviceList.Find((device) =>
      device.spk == SPK.SensorWater
      || device.spk == SPK.SensorGas
      || device.spk == SPK.SensorSmoke
      || device.spk == SPK.SensorDryContact || device.spk == SPK.SensorDryContact2
      || device.spk == SPK.SensorShanLan
      || device.spk == SPK.SensorDuiShe
      || device.spk == SPK.SensorPir
      || device.spk == SPK.SensorDoorWindow
      || device.spk == SPK.SensorUtrasonic
      || device.spk == SPK.SenesorMegahealth
      || device.spk == SPK.SenesorMegahealth2
      || device.spk == SPK.SensorEnvironment
       || device.spk == SPK.SensorEnvironment2
        || device.spk == SPK.SensorEnvironment3
          || device.spk == SPK.SensorTemperature
            || device.spk == SPK.SensorHumidity
              || device.spk == SPK.SensorCO2
                || device.spk == SPK.SensorPm25
                  || device.spk == SPK.SensorTVOC
                    || device.spk == SPK.SensorHcho
      );
      if (sensor != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.Sensor));
      }
      ///家电类
      var electric = deviceList.Find((device) =>
      device.spk == SPK.AirSwitch
      || device.spk == SPK.PanelSocket
      || device.spk == SPK.ElectricSocket
      );
      if (electric != null)
      {
        deviceStrTypeList.Add(Language.StringByID(StringId.Electric));
      }
      return deviceStrTypeList;

    }
    /// <summary>
    /// 设备类型FunctionType列表
    /// </summary>
    /// <param name="deviceType">设备类型(灯光类，窗帘类。)</param>
    /// <returns></returns>
    public List<string> GetDeviceTypeFunctionList(string deviceType)
    {
      List<string> functionTypeList = new List<string>();
            List<string> functionTypeList = new List<string>();
            ///灯光类
            if (deviceType == Language.StringByID(StringId.Lights))
            {
@@ -556,6 +558,7 @@
                functionTypeList.Add(SPK.SensorPm25);
                functionTypeList.Add(SPK.SensorTVOC);
                functionTypeList.Add(SPK.SensorHcho);
                functionTypeList.Add(SPK.SensorHelp);


            }
@@ -566,7 +569,8 @@
                functionTypeList.Add(SPK.PanelSocket);
                functionTypeList.Add(SPK.ElectricSocket);
            }
            else {
            else
            {
                functionTypeList.Add(SPK.LightSwitch);
                functionTypeList.Add(SPK.LightDimming);
                functionTypeList.Add(SPK.LightRGB);
@@ -609,410 +613,412 @@
                functionTypeList.Add(SPK.PanelSocket);
                functionTypeList.Add(SPK.ElectricSocket);
                functionTypeList.Add(SPK.HvacCac);
                functionTypeList.Add(SPK.SensorHelp);

            }


      return functionTypeList;
            return functionTypeList;

    }
    /// <summary>
    /// 条件/目标支持设备
    /// </summary>
    /// <returns></returns>
    public List<string> GetSupportEquipment(string if_type)
    {
      List<string> deviceTypeList = new List<string>();
      switch (if_type)
      {
        case condition_if:
          {
            deviceTypeList.Add(SPK.LightSwitch);
            deviceTypeList.Add(SPK.LightRGB);
            deviceTypeList.Add(SPK.LightRGBW);
            deviceTypeList.Add(SPK.LightDimming);
            deviceTypeList.Add(SPK.LightCCT);
            deviceTypeList.Add(SPK.CurtainSwitch);
            deviceTypeList.Add(SPK.CurtainRoller);
            deviceTypeList.Add(SPK.CurtainTrietex);
            deviceTypeList.Add(SPK.AcStandard); deviceTypeList.Add(SPK.HvacAC);
            deviceTypeList.Add(SPK.AirFreshStandard); deviceTypeList.Add(SPK.HvacAirFresh);
            deviceTypeList.Add(SPK.FloorHeatStandard); deviceTypeList.Add(SPK.HvacFloorHeat);
            deviceTypeList.Add(SPK.SensorSmoke);
            deviceTypeList.Add(SPK.SensorWater);
            deviceTypeList.Add(SPK.SensorGas);
            deviceTypeList.Add(SPK.SensorDryContact); deviceTypeList.Add(SPK.SensorDryContact2);
            deviceTypeList.Add(SPK.SensorShanLan);
            deviceTypeList.Add(SPK.SensorDuiShe);
            deviceTypeList.Add(SPK.SensorPir);
            deviceTypeList.Add(SPK.SensorDoorWindow);
            deviceTypeList.Add(SPK.SensorUtrasonic);
            deviceTypeList.Add(SPK.SenesorMegahealth);
            deviceTypeList.Add(SPK.SenesorMegahealth2);
            deviceTypeList.Add(SPK.SensorEnvironment);
            deviceTypeList.Add(SPK.SensorEnvironment2);
            deviceTypeList.Add(SPK.SensorEnvironment3);
            deviceTypeList.Add(SPK.SensorTemperature);
            deviceTypeList.Add(SPK.SensorHumidity);
            deviceTypeList.Add(SPK.SensorCO2);
            deviceTypeList.Add(SPK.SensorPm25);
            deviceTypeList.Add(SPK.SensorTVOC);
            deviceTypeList.Add(SPK.SensorHcho);
            deviceTypeList.Add(SPK.AirSwitch);
            deviceTypeList.Add(SPK.PanelSocket);
            deviceTypeList.Add(SPK.ElectricSocket);
                        deviceTypeList.Add(SPK.HvacCac);

          }
          break;
        case target_if:
          {
            deviceTypeList.Add(SPK.LightSwitch);
            deviceTypeList.Add(SPK.LightRGB);
            deviceTypeList.Add(SPK.LightRGBW);
            deviceTypeList.Add(SPK.LightDimming);
            deviceTypeList.Add(SPK.LightCCT);
            deviceTypeList.Add(SPK.CurtainSwitch);
            deviceTypeList.Add(SPK.CurtainRoller);
            deviceTypeList.Add(SPK.CurtainTrietex);
            deviceTypeList.Add(SPK.AcStandard); deviceTypeList.Add(SPK.HvacAC);
            deviceTypeList.Add(SPK.FloorHeatStandard); deviceTypeList.Add(SPK.HvacFloorHeat);
            deviceTypeList.Add(SPK.AirFreshStandard); deviceTypeList.Add(SPK.HvacAirFresh);
            deviceTypeList.Add(SPK.AirSwitch);
            deviceTypeList.Add(SPK.PanelSocket);
            deviceTypeList.Add(SPK.ElectricSocket);
          }
          break;
      }
      return deviceTypeList;
    }
    #endregion
    /// <summary>
    /// 显示的设备列表
    /// </summary>
    /// <param name="functionType">源数据列表1</param>
    /// <param name="deviceList">源数据列表2</param>
    /// <returns></returns>
    public List<Entity.Function> GetShowDeviceList(List<string> functionType, List<HDL_ON.Entity.Function> deviceList)
    {
      List<HDL_ON.Entity.Function> devList = new List<Entity.Function>();
      for (int i = 0; i < deviceList.Count; i++)
      {
        var dev = deviceList[i];
        //过滤掉不需要显示的设备
        if (functionType.Contains(dev.spk))
        {
          devList.Add(dev);
        }

      }

      return devList;
    }
    /// <summary>
    /// 返回最终支持显示出来的设备列表
    /// </summary>
    /// <param name="room">当前房间</param>
    /// <param name="str">判断符（表示=输入设备和输出设备）</param>
    /// <returns></returns>
    public List<Entity.Function> GetFunctionDeviceList(Entity.Room room, string str)
    {
      List<string> functionTypeList = GetSupportEquipment(str);
      //返回房间设备列表
      var roomDeviceList = GetRoomDevice(room);
      //返回最终支持显示出来的设备列表
      var list = GetShowDeviceList(functionTypeList, roomDeviceList);
      return list;
    }
    /// <summary>
    /// 网关ID(获取嘉乐网关ID)
    /// </summary>
    public string GatewayId
    {
      get
      {
        if (Entity.DB_ResidenceData.Instance.HomeGateway == null)
        /// <summary>
        /// 条件/目标支持设备
        /// </summary>
        /// <returns></returns>
        public List<string> GetSupportEquipment(string if_type)
        {
          return DriverLayer.Control.Ins.GatewayId;
        }
        return Entity.DB_ResidenceData.Instance.HomeGateway.gatewayId;
      }
    }
    /// <summary>
    /// 住宅ID
    /// </summary>
    public string HomeId
    {
      get
      {
        return Entity.DB_ResidenceData.Instance.CurrentRegion.id;
      }
    }
    /// <summary>
    /// 是否为其他主用户分享过来的住宅
    /// </summary>
    public bool IsOthreShare
    {
      get
      {
        return Entity.DB_ResidenceData.Instance.CurrentRegion.isOtherShare;
      }
    }

    #region 高德坐标转WGS84坐标
    /// <summary>
    /// 高德坐标转WGS84坐标
    /// </summary>
    /// <param name="in_lng"></param>
    /// <param name="in_lat"></param>
    /// <param name="out_lng"></param>
    /// <param name="out_lat"></param>
    public void GCJ02_to_WGS84(double in_lng, double in_lat, out double out_lng, out double out_lat)
    {
      if (OutOfChina(in_lat, in_lng))
      {
        out_lng = in_lng;
        out_lat = in_lat;
        return;
      }

      CalculateDev(in_lng, in_lat, out out_lng, out out_lat);
      out_lng = in_lng - out_lng;
      out_lat = in_lat - out_lat;
    }
    #endregion

    #region WGS84坐标转高德坐标
    /// <summary>
    /// WGS84坐标转高德坐标
    /// </summary>
    /// <param name="in_lng">经度</param>
    /// <param name="in_lat">纬度</param>
    /// <param name="out_lng"></param>
    /// <param name="out_lat"></param>
    public void WGS84_to_GCJ02(double in_lng, double in_lat, out double out_lng, out double out_lat)
    {
      if (OutOfChina(in_lat, in_lng))
      {
        out_lng = in_lng;
        out_lat = in_lat;
        return;
      }

      CalculateDev(in_lng, in_lat, out out_lng, out out_lat);
      out_lng = in_lng + out_lng;
      out_lat = in_lat + out_lat;
    }
    #endregion

    /// <summary>
    /// 坐标是否在中国境内
    /// </summary>
    /// <param name="lat"></param>
    /// <param name="lng"></param>
    /// <returns></returns>
    public bool OutOfChina(double lat, double lng)
    {
      if (lng < 72.004 || lng > 137.8347)
        return true;
      if (lat < 0.8293 || lat > 55.8271)
        return true;
      return false;
    }
    /// <summary>
    /// 计算偏差
    /// </summary>
    /// <param name="in_lng"></param>
    /// <param name="in_lat"></param>
    /// <param name="dLng"></param>
    /// <param name="dLat"></param>
    private void CalculateDev(double in_lng, double in_lat, out double dLng, out double dLat)
    {
      dLat = TransformLat(in_lng - 105.0, in_lat - 35.0);
      dLng = TransformLng(in_lng - 105.0, in_lat - 35.0);

      double radLat = in_lat / 180.0 * pi;
      double magic = Math.Sin(radLat);
      magic = 1 - ee * magic * magic;
      double sqrtMagic = Math.Sqrt(magic);
      dLat = (dLat * 180.0) / ((a * (1 - ee)) / (magic * sqrtMagic) * pi);
      dLng = (dLng * 180.0) / (a / sqrtMagic * Math.Cos(radLat) * pi);
    }

    private double TransformLat(double x, double y)
    {
      double ret = -100.0 + 2.0 * x + 3.0 * y + 0.2 * y * y + 0.1 * x * y + 0.2 * Math.Sqrt(Math.Abs(x));
      ret += (20.0 * Math.Sin(6.0 * x * pi) + 20.0 * Math.Sin(2.0 * x * pi)) * 2.0 / 3.0;
      ret += (20.0 * Math.Sin(y * pi) + 40.0 * Math.Sin(y / 3.0 * pi)) * 2.0 / 3.0;
      ret += (160.0 * Math.Sin(y / 12.0 * pi) + 320 * Math.Sin(y * pi / 30.0)) * 2.0 / 3.0;
      return ret;
    }
    private double TransformLng(double x, double y)
    {
      double ret = 300.0 + x + 2.0 * y + 0.1 * x * x + 0.1 * x * y + 0.1 * Math.Sqrt(Math.Abs(x));
      ret += (20.0 * Math.Sin(6.0 * x * pi) + 20.0 * Math.Sin(2.0 * x * pi)) * 2.0 / 3.0;
      ret += (20.0 * Math.Sin(x * pi) + 40.0 * Math.Sin(x / 3.0 * pi)) * 2.0 / 3.0;
      ret += (150.0 * Math.Sin(x / 12.0 * pi) + 300.0 * Math.Sin(x / 30.0 * pi)) * 2.0 / 3.0;
      return ret;
    }
    // 椭球参数-圆周率
    private const double pi = 3.14159265358979324;

    // (北京54)椭球长半轴，卫星椭球坐标投影到平面地图坐标系的投影因子
    private const double a = 6378245.0;
    /*
        * Krasovsky 1940 (北京54)椭球长半轴第一偏心率平方
        * 计算方式：
        * 长半轴：
        * a = 6378245.0
        * 扁率：
        * 1/f = 298.3（变量相关计算为：(a-b)/a）
        * 短半轴：
        * b = 6356863.0188 (变量相关计算方法为：b = a * (1 - f))
        * 第一偏心率平方:
        * e2 = (a^2 - b^2) / a^2;
    */
    private const double ee = 0.00669342162296594323;

    /// <summary>
    /// APP上报GPS经纬度
    /// </summary>
    /// <param name="lon">APP GPS经度</param>
    /// <param name="lat">APP GPS纬度</param>
    public void AppLatAndLonEvent(double lon, double lat)
    {
      Console.WriteLine($"GPS经度===={lon}  \nGPS纬度===={lat}");
      //Application.LocationAction += (lon, lat) =>
      //{
      //  Console.WriteLine($"GPS经度===={lon}");
      //  Console.WriteLine($"GPS纬度===={lat}");
      //  ////GPS坐标转成高德坐标
      //  //double out_lng, out_lat;
      //  //this.WGS84_to_GCJ02(lon, lat, out out_lng, out out_lat);
      //  //上报经纬度
      //  this.AutomatedGeofenceStatusReporting(lon, lat);
      //};
      //上报经纬度<gps 上报条件大于30秒且移动距离大于100米，上报经纬度>
      this.AutomatedGeofenceStatusReporting(lon, lat);
    }

    /// <summary>
    /// 自动化地理围栏状态上报云端
    /// </summary>
    /// <param name="out_lng">APP GPS经度</param>
    /// <param name="out_lat">APP GPS纬度</param>
    private void AutomatedGeofenceStatusReporting(double out_lng, double out_lat)
    {
      if (IsOthreShare)
      {
        //不是主账号直接返回
        return;
      }
      List<LogicData> logicDataList = new List<LogicData>();
      logicDataList.Clear();
      System.Threading.Tasks.Task.Run(() =>
      {
        try
        {
          //获取逻辑ID列表，目前针对所有<备注:如果只针对当前手机的话，可以直接拿缓存数据自动化列表遍历>
          var idStr = Send.GetLogicIdList();
          if (idStr.Code == "0" && idStr.Data != null && idStr.Data.ToString() != "")
          {
            var date = Newtonsoft.Json.JsonConvert.SerializeObject(idStr.Data);
            logicDataList = Newtonsoft.Json.JsonConvert.DeserializeObject<List<LogicData>>(date);
          }
          ///有自动列表才处理
          if (logicDataList.Count > 0)
          {
            ///遍历所有列表
            for (int i = 0; i < logicDataList.Count; i++)
            List<string> deviceTypeList = new List<string>();
            switch (if_type)
            {
              var logicDate = logicDataList[i];
              ///自动化没有配置地理围栏不处理
              if (string.IsNullOrEmpty(logicDate.geo_fence.latitude) || string.IsNullOrEmpty(logicDate.geo_fence.longitude))
              {
                //经纬度为空,认为自动化没有配置地理围栏，不处理;
                continue;
              }
              //自动化配置输入条件纬度
              double lat = Convert.ToDouble(logicDate.geo_fence.latitude.Replace(",", "."));
              //自动化配置输入条件经度
              double lon = Convert.ToDouble(logicDate.geo_fence.longitude.Replace(",", "."));
              //自动化配置输入条件<地理围栏半径><单位，公里、千米.米>
              int radius = int.Parse(logicDate.geo_fence.radius);
              //计算2个经纬度之间的距离
              int r = Infrastructure.Service.Helper.CalculatedDistance.Distance(out_lat, out_lng, lat, lon);
              //定义一个局部变量
              string direction = string.Empty;
              //两点距离小于配置距离<既自动化配置输入条件地理围栏半径>,说明进入区域
              if (r < radius)
              {
                //到达某地
                direction = "arrive";
              }
              else
              {
                //离开
                direction = "leave";
              }
              ///遍历缓存列表<不为空说明数据已经推送过，不再推送>
              var isPush = pushList.Find((o) => o.homeId == HomeId && o.userId == UserInfo.Current.ID && o.userLogicId == logicDate.userLogicId && o.arriveOnLeave == direction);
              if (isPush == null)
              {
                //推送给云端是否成功
                bool push = Send.GeoFenceStateReport(logicDate.userLogicId, logicDate.sid, direction);
                if (push)
                case condition_if:
                    {
                        deviceTypeList.Add(SPK.LightSwitch);
                        deviceTypeList.Add(SPK.LightRGB);
                        deviceTypeList.Add(SPK.LightRGBW);
                        deviceTypeList.Add(SPK.LightDimming);
                        deviceTypeList.Add(SPK.LightCCT);
                        deviceTypeList.Add(SPK.CurtainSwitch);
                        deviceTypeList.Add(SPK.CurtainRoller);
                        deviceTypeList.Add(SPK.CurtainTrietex);
                        deviceTypeList.Add(SPK.AcStandard); deviceTypeList.Add(SPK.HvacAC);
                        deviceTypeList.Add(SPK.AirFreshStandard); deviceTypeList.Add(SPK.HvacAirFresh);
                        deviceTypeList.Add(SPK.FloorHeatStandard); deviceTypeList.Add(SPK.HvacFloorHeat);
                        deviceTypeList.Add(SPK.SensorSmoke);
                        deviceTypeList.Add(SPK.SensorWater);
                        deviceTypeList.Add(SPK.SensorGas);
                        deviceTypeList.Add(SPK.SensorDryContact); deviceTypeList.Add(SPK.SensorDryContact2);
                        deviceTypeList.Add(SPK.SensorShanLan);
                        deviceTypeList.Add(SPK.SensorDuiShe);
                        deviceTypeList.Add(SPK.SensorPir);
                        deviceTypeList.Add(SPK.SensorDoorWindow);
                        deviceTypeList.Add(SPK.SensorUtrasonic);
                        deviceTypeList.Add(SPK.SenesorMegahealth);
                        deviceTypeList.Add(SPK.SenesorMegahealth2);
                        deviceTypeList.Add(SPK.SensorEnvironment);
                        deviceTypeList.Add(SPK.SensorEnvironment2);
                        deviceTypeList.Add(SPK.SensorEnvironment3);
                        deviceTypeList.Add(SPK.SensorTemperature);
                        deviceTypeList.Add(SPK.SensorHumidity);
                        deviceTypeList.Add(SPK.SensorCO2);
                        deviceTypeList.Add(SPK.SensorPm25);
                        deviceTypeList.Add(SPK.SensorTVOC);
                        deviceTypeList.Add(SPK.SensorHcho);
                        deviceTypeList.Add(SPK.AirSwitch);
                        deviceTypeList.Add(SPK.PanelSocket);
                        deviceTypeList.Add(SPK.ElectricSocket);
                        deviceTypeList.Add(SPK.HvacCac);
                        deviceTypeList.Add(SPK.SensorHelp);

                    }
                    break;
                case target_if:
                    {
                        deviceTypeList.Add(SPK.LightSwitch);
                        deviceTypeList.Add(SPK.LightRGB);
                        deviceTypeList.Add(SPK.LightRGBW);
                        deviceTypeList.Add(SPK.LightDimming);
                        deviceTypeList.Add(SPK.LightCCT);
                        deviceTypeList.Add(SPK.CurtainSwitch);
                        deviceTypeList.Add(SPK.CurtainRoller);
                        deviceTypeList.Add(SPK.CurtainTrietex);
                        deviceTypeList.Add(SPK.AcStandard); deviceTypeList.Add(SPK.HvacAC);
                        deviceTypeList.Add(SPK.FloorHeatStandard); deviceTypeList.Add(SPK.HvacFloorHeat);
                        deviceTypeList.Add(SPK.AirFreshStandard); deviceTypeList.Add(SPK.HvacAirFresh);
                        deviceTypeList.Add(SPK.AirSwitch);
                        deviceTypeList.Add(SPK.PanelSocket);
                        deviceTypeList.Add(SPK.ElectricSocket);
                    }
                    break;
            }
            return deviceTypeList;
        }
        #endregion
        /// <summary>
        /// 显示的设备列表
        /// </summary>
        /// <param name="functionType">源数据列表1</param>
        /// <param name="deviceList">源数据列表2</param>
        /// <returns></returns>
        public List<Entity.Function> GetShowDeviceList(List<string> functionType, List<HDL_ON.Entity.Function> deviceList)
        {
            List<HDL_ON.Entity.Function> devList = new List<Entity.Function>();
            for (int i = 0; i < deviceList.Count; i++)
            {
                var dev = deviceList[i];
                //过滤掉不需要显示的设备
                if (functionType.Contains(dev.spk))
                {
                  ///添加到推送列表
                  pushList.Add(new Push
                  {
                    homeId = HomeId,
                    userId = UserInfo.Current.ID,
                    userLogicId = logicDate.userLogicId,
                    sid = logicDate.sid,
                    arriveOnLeave = direction,
                  });
                    devList.Add(dev);
                }
              }

            }

          }
            return devList;
        }
        catch { }
      });
        /// <summary>
        /// 返回最终支持显示出来的设备列表
        /// </summary>
        /// <param name="room">当前房间</param>
        /// <param name="str">判断符（表示=输入设备和输出设备）</param>
        /// <returns></returns>
        public List<Entity.Function> GetFunctionDeviceList(Entity.Room room, string str)
        {
            List<string> functionTypeList = GetSupportEquipment(str);
            //返回房间设备列表
            var roomDeviceList = GetRoomDevice(room);
            //返回最终支持显示出来的设备列表
            var list = GetShowDeviceList(functionTypeList, roomDeviceList);
            return list;
        }
        /// <summary>
        /// 网关ID(获取嘉乐网关ID)
        /// </summary>
        public string GatewayId
        {
            get
            {
                if (Entity.DB_ResidenceData.Instance.HomeGateway == null)
                {
                    return DriverLayer.Control.Ins.GatewayId;
                }
                return Entity.DB_ResidenceData.Instance.HomeGateway.gatewayId;
            }
        }
        /// <summary>
        /// 住宅ID
        /// </summary>
        public string HomeId
        {
            get
            {
                return Entity.DB_ResidenceData.Instance.CurrentRegion.id;
            }
        }
        /// <summary>
        /// 是否为其他主用户分享过来的住宅
        /// </summary>
        public bool IsOthreShare
        {
            get
            {
                return Entity.DB_ResidenceData.Instance.CurrentRegion.isOtherShare;
            }
        }

        #region 高德坐标转WGS84坐标
        /// <summary>
        /// 高德坐标转WGS84坐标
        /// </summary>
        /// <param name="in_lng"></param>
        /// <param name="in_lat"></param>
        /// <param name="out_lng"></param>
        /// <param name="out_lat"></param>
        public void GCJ02_to_WGS84(double in_lng, double in_lat, out double out_lng, out double out_lat)
        {
            if (OutOfChina(in_lat, in_lng))
            {
                out_lng = in_lng;
                out_lat = in_lat;
                return;
            }

            CalculateDev(in_lng, in_lat, out out_lng, out out_lat);
            out_lng = in_lng - out_lng;
            out_lat = in_lat - out_lat;
        }
        #endregion

        #region WGS84坐标转高德坐标
        /// <summary>
        /// WGS84坐标转高德坐标
        /// </summary>
        /// <param name="in_lng">经度</param>
        /// <param name="in_lat">纬度</param>
        /// <param name="out_lng"></param>
        /// <param name="out_lat"></param>
        public void WGS84_to_GCJ02(double in_lng, double in_lat, out double out_lng, out double out_lat)
        {
            if (OutOfChina(in_lat, in_lng))
            {
                out_lng = in_lng;
                out_lat = in_lat;
                return;
            }

            CalculateDev(in_lng, in_lat, out out_lng, out out_lat);
            out_lng = in_lng + out_lng;
            out_lat = in_lat + out_lat;
        }
        #endregion

        /// <summary>
        /// 坐标是否在中国境内
        /// </summary>
        /// <param name="lat"></param>
        /// <param name="lng"></param>
        /// <returns></returns>
        public bool OutOfChina(double lat, double lng)
        {
            if (lng < 72.004 || lng > 137.8347)
                return true;
            if (lat < 0.8293 || lat > 55.8271)
                return true;
            return false;
        }
        /// <summary>
        /// 计算偏差
        /// </summary>
        /// <param name="in_lng"></param>
        /// <param name="in_lat"></param>
        /// <param name="dLng"></param>
        /// <param name="dLat"></param>
        private void CalculateDev(double in_lng, double in_lat, out double dLng, out double dLat)
        {
            dLat = TransformLat(in_lng - 105.0, in_lat - 35.0);
            dLng = TransformLng(in_lng - 105.0, in_lat - 35.0);

            double radLat = in_lat / 180.0 * pi;
            double magic = Math.Sin(radLat);
            magic = 1 - ee * magic * magic;
            double sqrtMagic = Math.Sqrt(magic);
            dLat = (dLat * 180.0) / ((a * (1 - ee)) / (magic * sqrtMagic) * pi);
            dLng = (dLng * 180.0) / (a / sqrtMagic * Math.Cos(radLat) * pi);
        }

        private double TransformLat(double x, double y)
        {
            double ret = -100.0 + 2.0 * x + 3.0 * y + 0.2 * y * y + 0.1 * x * y + 0.2 * Math.Sqrt(Math.Abs(x));
            ret += (20.0 * Math.Sin(6.0 * x * pi) + 20.0 * Math.Sin(2.0 * x * pi)) * 2.0 / 3.0;
            ret += (20.0 * Math.Sin(y * pi) + 40.0 * Math.Sin(y / 3.0 * pi)) * 2.0 / 3.0;
            ret += (160.0 * Math.Sin(y / 12.0 * pi) + 320 * Math.Sin(y * pi / 30.0)) * 2.0 / 3.0;
            return ret;
        }
        private double TransformLng(double x, double y)
        {
            double ret = 300.0 + x + 2.0 * y + 0.1 * x * x + 0.1 * x * y + 0.1 * Math.Sqrt(Math.Abs(x));
            ret += (20.0 * Math.Sin(6.0 * x * pi) + 20.0 * Math.Sin(2.0 * x * pi)) * 2.0 / 3.0;
            ret += (20.0 * Math.Sin(x * pi) + 40.0 * Math.Sin(x / 3.0 * pi)) * 2.0 / 3.0;
            ret += (150.0 * Math.Sin(x / 12.0 * pi) + 300.0 * Math.Sin(x / 30.0 * pi)) * 2.0 / 3.0;
            return ret;
        }
        // 椭球参数-圆周率
        private const double pi = 3.14159265358979324;

        // (北京54)椭球长半轴，卫星椭球坐标投影到平面地图坐标系的投影因子
        private const double a = 6378245.0;
        /*
            * Krasovsky 1940 (北京54)椭球长半轴第一偏心率平方
            * 计算方式：
            * 长半轴：
            * a = 6378245.0
            * 扁率：
            * 1/f = 298.3（变量相关计算为：(a-b)/a）
            * 短半轴：
            * b = 6356863.0188 (变量相关计算方法为：b = a * (1 - f))
            * 第一偏心率平方:
            * e2 = (a^2 - b^2) / a^2;
        */
        private const double ee = 0.00669342162296594323;

        /// <summary>
        /// APP上报GPS经纬度
        /// </summary>
        /// <param name="lon">APP GPS经度</param>
        /// <param name="lat">APP GPS纬度</param>
        public void AppLatAndLonEvent(double lon, double lat)
        {
            Console.WriteLine($"GPS经度===={lon}  \nGPS纬度===={lat}");
            //Application.LocationAction += (lon, lat) =>
            //{
            //  Console.WriteLine($"GPS经度===={lon}");
            //  Console.WriteLine($"GPS纬度===={lat}");
            //  ////GPS坐标转成高德坐标
            //  //double out_lng, out_lat;
            //  //this.WGS84_to_GCJ02(lon, lat, out out_lng, out out_lat);
            //  //上报经纬度
            //  this.AutomatedGeofenceStatusReporting(lon, lat);
            //};
            //上报经纬度<gps 上报条件大于30秒且移动距离大于100米，上报经纬度>
            this.AutomatedGeofenceStatusReporting(lon, lat);
        }

        /// <summary>
        /// 自动化地理围栏状态上报云端
        /// </summary>
        /// <param name="out_lng">APP GPS经度</param>
        /// <param name="out_lat">APP GPS纬度</param>
        private void AutomatedGeofenceStatusReporting(double out_lng, double out_lat)
        {
            if (IsOthreShare)
            {
                //不是主账号直接返回
                return;
            }
            List<LogicData> logicDataList = new List<LogicData>();
            logicDataList.Clear();
            System.Threading.Tasks.Task.Run(() =>
            {
                try
                {
              //获取逻辑ID列表，目前针对所有<备注:如果只针对当前手机的话，可以直接拿缓存数据自动化列表遍历>
              var idStr = Send.GetLogicIdList();
                    if (idStr.Code == "0" && idStr.Data != null && idStr.Data.ToString() != "")
                    {
                        var date = Newtonsoft.Json.JsonConvert.SerializeObject(idStr.Data);
                        logicDataList = Newtonsoft.Json.JsonConvert.DeserializeObject<List<LogicData>>(date);
                    }
              ///有自动列表才处理
              if (logicDataList.Count > 0)
                    {
                  ///遍历所有列表
                  for (int i = 0; i < logicDataList.Count; i++)
                        {
                            var logicDate = logicDataList[i];
                      ///自动化没有配置地理围栏不处理
                      if (string.IsNullOrEmpty(logicDate.geo_fence.latitude) || string.IsNullOrEmpty(logicDate.geo_fence.longitude))
                            {
                          //经纬度为空,认为自动化没有配置地理围栏，不处理;
                          continue;
                            }
                      //自动化配置输入条件纬度
                      double lat = Convert.ToDouble(logicDate.geo_fence.latitude.Replace(",", "."));
                      //自动化配置输入条件经度
                      double lon = Convert.ToDouble(logicDate.geo_fence.longitude.Replace(",", "."));
                      //自动化配置输入条件<地理围栏半径><单位，公里、千米.米>
                      int radius = int.Parse(logicDate.geo_fence.radius);
                      //计算2个经纬度之间的距离
                      int r = Infrastructure.Service.Helper.CalculatedDistance.Distance(out_lat, out_lng, lat, lon);
                      //定义一个局部变量
                      string direction = string.Empty;
                      //两点距离小于配置距离<既自动化配置输入条件地理围栏半径>,说明进入区域
                      if (r < radius)
                            {
                          //到达某地
                          direction = "arrive";
                            }
                            else
                            {
                          //离开
                          direction = "leave";
                            }
                      ///遍历缓存列表<不为空说明数据已经推送过，不再推送>
                      var isPush = pushList.Find((o) => o.homeId == HomeId && o.userId == UserInfo.Current.ID && o.userLogicId == logicDate.userLogicId && o.arriveOnLeave == direction);
                            if (isPush == null)
                            {
                          //推送给云端是否成功
                          bool push = Send.GeoFenceStateReport(logicDate.userLogicId, logicDate.sid, direction);
                                if (push)
                                {
                              ///添加到推送列表
                              pushList.Add(new Push
                                    {
                                        homeId = HomeId,
                                        userId = UserInfo.Current.ID,
                                        userLogicId = logicDate.userLogicId,
                                        sid = logicDate.sid,
                                        arriveOnLeave = direction,
                                    });
                                }
                            }
                        }

                    }
                }
                catch { }
            });
        }
        /// <summary>
        /// 推送列表<这里数据已经推送过>
        /// </summary>
        private static List<Push> pushList = new List<Push>();

    }
    /// <summary>
    /// 推送列表<这里数据已经推送过>
    /// </summary>
    private static List<Push> pushList = new List<Push>();
    public class Push
    {
        /// <summary>
        /// 云端唯一id
        /// </summary>
        public string userLogicId = "";
        /// <summary>
        /// 网关id
        /// </summary>
        public string gatewayId = "";
        /// <summary>
        /// 逻辑唯一标识
        /// </summary>
        public string sid = "";
        /// <summary>
        /// 住宅id
        /// </summary>
        public string homeId = "";
        /// <summary>
        /// 到达某地 离开
        /// </summary>
        public string arriveOnLeave = "";
        /// <summary>
        ///  用户id
        /// </summary>
        public string userId = "";

  }
  public class Push
  {
    /// <summary>
    /// 云端唯一id
    /// </summary>
    public string userLogicId = "";
    /// <summary>
    /// 网关id
    /// </summary>
    public string gatewayId = "";
    /// <summary>
    /// 逻辑唯一标识
    /// </summary>
    public string sid = "";
    /// <summary>
    /// 住宅id
    /// </summary>
    public string homeId = "";
    /// <summary>
    /// 到达某地 离开
    /// </summary>
    public string arriveOnLeave = "";
    /// <summary>
    ///  用户id
    /// </summary>
    public string userId = "";

  }
    }
}